hashcat Forum

Full Version: need help to Finish my first Rig of 8 GPU titan x? (perhaps somthing is missing?)
You're currently viewing a stripped down version of our content. View the full version with proper formatting.
Pages: 1 2
which mean its no good for this kind of usage, did i understand it correctly?

btw,
what will be the avarage temp on full load?

and after what °C it can hurt the performance?
If you tune everything properly, you should be able to run at 60-70C depending on the GPU. But this depends on you knowing how to tune everything properly.
(02-16-2016, 11:52 PM)pay Wrote: [ -> ]http://i.imgur.com/DXek3bS.png
http://i.imgur.com/sM6uZyO.png
http://i.imgur.com/MwZMle0.png
http://i.imgur.com/wCfxEii.png

i dont expect nothing to be honest, just learning thats all Smile
Ok, an air duct, not an air dust...passive cards only, but you know that already Wink


(02-16-2016, 11:52 PM)pay Wrote: [ -> ]and after what °C it can hurt the performance?
That's flexible and depends on the temperature-taget you're setting. But you usually ramp up the fans and let them run at high speed, so the TT doesn't affect you.
and what is the temp that can hurt the performance? like above 80 degree is hurting the performance but below that its ok?
does one of u know what is the exact (average) temp?
That's a difficult question. The GTX cards have a base clock and a boost clock, which is automatically generated by the base clock value. Each manufacturer chooses a certain base clock for his card, so different brands of the same GPU type have different clock rates. In addition a card can be manually overclocked.
But the maximum clock can only be reached if it doesn't hurt the power limit (which is adjustable) or the temperature target (also adjustable). And each GPU has its individual maximum clock rate at which its running fine. At some its higher, at some lower.
The higher the power limit, the more heat the cards produces. The more heat it produces the more energy is needed. So there is a limit somewhere. With two or more cards in a rig the cards start heating up each other. They don't get as much air as when running alone aka running hotter. Their performance now also depends on how much air you're shifting through the chassis.

If the GPU reaches its limit it will crash, a scenario you want to avoid at all.

Maybe you can already see the term "is hurting performance" makes no sense. You can put the power and temperature target to 125% and run a standard reference card at stock clock. No big deal, no performance hurting. Until you find out that other people with the same card run 250MHz higher. You start overclocking your card and they might hit their power or temperature limit. The card starts throttleing. Do we now hurt performance, although we're running way higher than stock clock?

Now you might get what epixoip meant when he said: "But this depends on you knowing how to tune everything properly."
Pages: 1 2