hashcat Forum

UPDATE: "OpenCL Runtime for Intel Core and Intel Xeon Processors" driver reinstalled for CPU. Now I have opencl support for CPU. Hashcat working well.

Today I tried to install new kernel, but it was fail. So I deleted and return the old kernel.
After that hashcat not respond the "s" or "q" key. So I can not update the screen, pressing "s" key.

hashcat version: v3.6.0 (installed from source)

l

Code:
[b]sb_release -a:[/b] 

[code]LSB Version:    core-9.20160110ubuntu0.2-amd64:core-9.20160110ubuntu0.2-noarch:security-9.20160110ubuntu0.2-amd64:security-9.20160110ubuntu0.2-noarch

Distributor ID:    Ubuntu

Description:    Ubuntu 16.04.3 LTS

Release:    16.04

Codename:    xenial

[/code]

uname -r: 4.4.0-96-generic

lspci | grep VGA: 00:02.0 VGA compatible controller: Intel Corporation HD Graphics 620 (rev 02)

"OpenCL Runtime for Intel Core and Intel Xeon Processors" driver installed for CPU.

Code:
[b]vivien@vivien-Inspiron-5567:~$ lspci[/b]

00.0 Host bridge: Intel Corporation Xeon E3-1200 v6/7th Gen Core Processor Host Bridge/DRAM Registers (rev 02)

02.0 VGA compatible controller: Intel Corporation HD Graphics 620 (rev 02)

04.0 Signal processing controller: Intel Corporation Xeon E3-1200 v5/E3-1500 v5/6th Gen Core Processor Thermal Subsystem (rev 02)

14.0 USB controller: Intel Corporation Sunrise Point-LP USB 3.0 xHCI Controller (rev 21)

14.2 Signal processing controller: Intel Corporation Sunrise Point-LP Thermal subsystem (rev 21)

15.0 Signal processing controller: Intel Corporation Sunrise Point-LP Serial IO I2C Controller #0 (rev 21)

15.1 Signal processing controller: Intel Corporation Sunrise Point-LP Serial IO I2C Controller #1 (rev 21)

16.0 Communication controller: Intel Corporation Sunrise Point-LP CSME HECI #1 (rev 21)

17.0 SATA controller: Intel Corporation Sunrise Point-LP SATA Controller [AHCI mode] (rev 21)

1c.0 PCI bridge: Intel Corporation Sunrise Point-LP PCI Express Root Port #5 (rev f1)

1c.5 PCI bridge: Intel Corporation Sunrise Point-LP PCI Express Root Port #6 (rev f1)

1f.0 ISA bridge: Intel Corporation Sunrise Point-LP LPC Controller (rev 21)

1f.2 Memory controller: Intel Corporation Sunrise Point-LP PMC (rev 21)

1f.3 Audio device: Intel Corporation Sunrise Point-LP HD Audio (rev 21)

1f.4 SMBus: Intel Corporation Sunrise Point-LP SMBus (rev 21)

00.0 Network controller: Intel Corporation Wireless 3165 (rev 79)

00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101/2/6E PCI Express Fast/Gigabit Ethernet controller (rev 07)

I attached the clinfo, also. Download

Could you help, please?

Retry with latest version from github

Same problem again.
Can not control running hashcat with keyboard. Can start hashcat as normal, can't see status, can't create checkpoint, stop running only with Ctrl+C keyboard combination.

Installed (by install.sh) opencl_runtime_16.1.1_x64_ubuntu_6.4.0.25.tgz

Commands:
hashcat -b >>>OK
hashcat -O -m 0 -a 0 md5_hash wordlist >>running, but can't control by keyboard

hashcat -O --status --status-timer=5 -m 0 -a 0 md4_hash wordlist >> running, can't control by keyboard, but status screen updated 5 sec

hashcat -V
v4.1.0-21-g215063d

clinfo: https://freeroute.sytes.net/view/cbebc0ad

root@Helium-XR-01:~# hashcat -I
hashcat (v4.1.0-21-g215063d) starting...

OpenCL Info:

Platform ID #1
Vendor : Intel(R) Corporation
Name : Intel(R) OpenCL
Version : OpenCL 1.2

Device ID #1
Type : CPU
Vendor ID : 8
Vendor : Intel(R) Corporation
Name : Intel(R) Xeon(R) CPU E5-2670 0 @ 2.60GHz
Version : OpenCL 1.2 (Build 475)
Processor(s) : 4
Clock : 2600
Memory : 3072/12288 MB allocatable
OpenCL Version : OpenCL C 1.2
Driver Version : 1.2.0.475

Screenshot: https://www.sendspace.com/file/gscbpi

With amd-opencl-icd driver I can run it with --force command and keyboard control working. But there is a mass speed loss.

Do you have any idea?

freeroute

atom

freeroute