+- hashcat Forum (https://hashcat.net/forum)
+-- Forum: Deprecated; Ancient Versions (https://hashcat.net/forum/forum-46.html)
+--- Forum: Very old oclHashcat-plus Support (https://hashcat.net/forum/forum-23.html)
+--- Thread: lower gpu util in linux (/thread-1987.html)
Pages:
1
2
lower gpu util in linux - hoze - 01-25-2013
I notice this in linux:
HWMon.GPU.#1.: 89% Util , sometime 90,92% , but i windows 7 64bit is allmost all the time 99% util.
Is there something wrong in linux?
RE: lower gpu util in linux - epixoip - 01-25-2013
depends on a number of factors. algorithm, attack mode, keyspace, -n and --gpu-loops values...
and in windows you're probably using your graphics card to drive your display. not sure if you're doing the same in linux, or if your linux box is headless. but there's probably more initial load in windows none the less.
RE: lower gpu util in linux - hoze - 01-25-2013
(01-25-2013, 06:50 PM)epixoip Wrote: depends on a number of factors. algorithm, attack mode, keyspace, -n and --gpu-loops values...
and in windows you're probably using your graphics card to drive your display. not sure if you're doing the same in linux, or if your linux box is headless. but there's probably more initial load in windows none the less.
Yes, I use for drive display in windows, but in linux too. The commands are the same for linux and windows.
RE: lower gpu util in linux - hoze - 01-26-2013
(01-25-2013, 06:54 PM)hoze Wrote:(01-25-2013, 06:50 PM)epixoip Wrote: depends on a number of factors. algorithm, attack mode, keyspace, -n and --gpu-loops values...
and in windows you're probably using your graphics card to drive your display. not sure if you're doing the same in linux, or if your linux box is headless. but there's probably more initial load in windows none the less.
Yes, I use for drive display in windows, but in linux too. The commands are the same for linux and windows.
Here is log from win 7:
Win 7 64bit
GPU clock 1150MHz, memory clock 1500MHz
x:\xxxxx\oclHashcat-plus-0.12>oclHashcat-plus64.exe -m 2500 -a 3 -i --increment-min=9 --increment-max=10 xxxxx.hccap ?d?d?d?d
?d?d?d?d?d --session=sess-xxxxx--restore-timer=60 --outfile-format=2 --outfile=xxxxx.txt
oclHashcat-plus v0.12 by atom starting...
Hashes: 1 total, 1 unique salts, 1 unique digests
Bitmaps: 8 bits, 256 entries, 0x000000ff mask, 1024 bytes
Workload: 16 loops, 8 accel
Watchdog: Temperature abort trigger set to 90c
Watchdog: Temperature retain trigger set to 80c
Device #1: Tahiti, 2048MB, 1150Mhz, 32MCU
Device #1: Kernel ./kernels/4098/m2500.Tahiti_938.2_CAL 1.4.1741 (VM).kernel (1399164 bytes)
[s]tatus [p]ause [r]esume [b]ypass [q]uit =>
Session.Name...: sess-xxxxx
Status.........: Running
Input.Mode.....: Mask (?d?d?d?d?d?d?d?d?d)
Hash.Target....: xxxxx (xx:xx:xx:xx:xx:xx <-> xx:xx:xx:xx:xx:xx)
Hash.Type......: WPA/WPA2
Time.Started...: Wed Jan 25 20:20:03 2012 (8 secs)
Time.Estimated.: Wed Jan 25 22:58:47 2012 (2 hours, 38 mins)
Speed.GPU.#1...: 116.9k/s
Recovered......: 0/1 Digests, 0/1 Salts
Progress.......: 901120/1000000000 (0.09%)
Rejected.......: 0/901120 (0.00%)
HWMon.GPU.#1...: 99% Util, 45c Temp, 58% Fan
[s]tatus [p]ause [r]esume [b]ypass [q]uit =>
Session.Name...: sess-xxxxx
Status.........: Running
Input.Mode.....: Mask (?d?d?d?d?d?d?d?d?d)
Hash.Target....: xxxxx (xx:xx:xx:xx:xx:xx <-> xx:xx:xx:xx:xx:xx)
Hash.Type......: WPA/WPA2
Time.Started...: Wed Jan 25 20:20:03 2012 (18 secs)
Time.Estimated.: Wed Jan 25 22:50:12 2012 (2 hours, 29 mins)
Speed.GPU.#1...: 116.9k/s
Recovered......: 0/1 Digests, 0/1 Salts
Progress.......: 2048000/1000000000 (0.20%)
Rejected.......: 0/2048000 (0.00%)
HWMon.GPU.#1...: 99% Util, 49c Temp, 60% Fan
[s]tatus [p]ause [r]esume [b]ypass [q]uit =>
,
Later I will post log from linux too.
RE: lower gpu util in linux - hoze - 01-26-2013
and here is log from linux too:
root@xxxxx:~/xxx/oclHashcat-plus-0.12# sh wpa2.sh
oclHashcat-plus v0.12 by atom starting...
Hashes: 1 total, 1 unique salts, 1 unique digests
Bitmaps: 8 bits, 256 entries, 0x000000ff mask, 1024 bytes
Workload: 16 loops, 8 accel
Watchdog: Temperature abort trigger set to 90c
Watchdog: Temperature retain trigger set to 80c
Device #1: Tahiti, 2048MB, 1150Mhz, 32MCU
Device #1: Kernel ./kernels/4098/m2500.Tahiti_938.2_CAL 1.4.1741 (VM).kernel (1399164 bytes)
[s]tatus [p]ause [r]esume [b]ypass [q]uit => s
Session.Name...: sess-xxxxx
Status.........: Running
Input.Mode.....: Mask (?d?d?d?d?d?d?d?d?d)
Hash.Target....: xxxxx (xx:xx:xx:xx:xx:xx <-> xx:xx:xx:xx:xx:xx)
Hash.Type......: WPA/WPA2
Time.Started...: Wed Jan 25 21:33:25 2012 (1 min, 10 secs)
Time.Estimated.: Thu Jan 26 00:10:38 2012 (2 hours, 36 mins)
Speed.GPU.#1...: 108.0k/s
Recovered......: 0/1 Digests, 0/1 Salts
Progress.......: 7553024/1000000000 (0.76%)
Rejected.......: 0/7553024 (0.00%)
HWMon.GPU.#1...: 91% Util, 59c Temp, 70% Fan
[s]tatus [p]ause [r]esume [b]ypass [q]uit =>
....so as you can see in linux HWMon.GPU.#1...: 91% Util only, but with same configration,same commands etc HWMon.GPU.#1...: 99% Util !
Maybe some advice ??
RE: lower gpu util in linux - Hash-IT - 01-26-2013
(01-26-2013, 09:20 PM)hoze Wrote: Maybe some advice ??
I am guessing, but I suspect epixoip meant your Win7 might use a more GPU intensive way of to driving your display. Win7 has some fancy graphical effects !
Have you tried switching to a basic theme ?
I also wonder if this is a little bit like wifi drivers. The same physical unit can display different signal strengths with a simple driver update. I suspect it is just the way the strength is reported that has changed.
There is of course the other possibility, you know, Win7 is just better than linux !!!
... I'm going to log off now to avoid the the inevitable tirade of abuse from the linux users here
RE: lower gpu util in linux - Kuci - 01-27-2013
(01-26-2013, 11:24 PM)Hash-IT Wrote: you know, Win7 is just better than linux !!!Win7 is operating system, linux is just kernel. You can't compare them. And respect -- for this pervert imagination of that NT based OS would be better than linux based, bro
Okey. I haven't seen anywhere, so what version of graphics drivers have you installed on your systems ? They aren't same version probably. Make sure you have installed Catalyst 12.8 on both of them.
RE: lower gpu util in linux - eljolot - 01-27-2013
Well both system have advantages and disadvantages. this could be and endless discussion like talking about religion and politics.
(01-26-2013, 11:24 PM)Hash-IT Wrote:(01-26-2013, 09:20 PM)hoze Wrote: Maybe some advice ??
I am guessing, but I suspect epixoip meant your Win7 might use a more GPU intensive way of to driving your display. Win7 has some fancy graphical effects !
Have you tried switching to a basic theme ?
I also wonder if this is a little bit like wifi drivers. The same physical unit can display different signal strengths with a simple driver update. I suspect it is just the way the strength is reported that has changed.
There is of course the other possibility, you know, Win7 is just better than linux !!!
... I'm going to log off now to avoid the the inevitable tirade of abuse from the linux users here
RE: lower gpu util in linux - hoze - 01-27-2013
(01-27-2013, 12:03 AM)Kuci Wrote:(01-26-2013, 11:24 PM)Hash-IT Wrote: you know, Win7 is just better than linux !!!Win7 is operating system, linux is just kernel. You can't compare them. And respect -- for this pervert imagination of that NT based OS would be better than linux based, bro
Okey. I haven't seen anywhere, so what version of graphics drivers have you installed on your systems ? They aren't same version probably. Make sure you have installed Catalyst 12.8 on both of them.
Installed Catalyst 12.8 on both
In windows when using ?1?1?1?1?1?1?1? mask , i have GPU speed over 150k/s . In linux is less.
RE: lower gpu util in linux - epixoip - 01-27-2013
(01-26-2013, 09:20 PM)hoze Wrote: Workload: 16 loops, 8 accel
and you wonder why you're not getting full speed?