+- hashcat Forum (https://hashcat.net/forum)
+-- Forum: Misc (https://hashcat.net/forum/forum-15.html)
+--- Forum: User Contributions (https://hashcat.net/forum/forum-25.html)
+--- Thread: Ubuntu 16.04 LTS NVIDIA Setup Guide (/thread-6063.html)
RE: Ubuntu 16.04 LTS NVIDIA Setup Guide - jimby - 08-09-2017
I found the directions about building a hash cracking rig from
http://www.netmux.com/blog/how-to-build-a-password-cracking-rig to be excellent.
Although it uses four GTX 1070 FEs in the text, I sub'ed four 1080 FEs without any problems.
However, the blog post specifies older software:
-Ubuntu 14.0.4.5 Desktop amd64
-Intel OpenCL Runtime 16.1 x64 Ubuntu Driver
-Nvidia Linux x86_64 375.20 Driver
-Hashcat v3.20
So these directions may not be applicable for everyone.
What may be of interest are several "gotcha" notes under the "INSTALLING SOFTWARE" section.
Check the "Step by Step" install procedures and compare with the latest software.
RE: Ubuntu 16.04 LTS NVIDIA Setup Guide - jimbas - 11-08-2017
Hi,
just added a new GTX 1080 to my current rig.
I'm running Ubuntu 16.04 Server and I was able to control my 2 GPUs with this guide and nvidia-settings commands.
Here's my nvidia-smi:
Code:
+-----------------------------------------------------------------------------+
| NVIDIA-SMI 384.98 Driver Version: 384.98 |
|-------------------------------+----------------------+----------------------+
| GPU Name Persistence-M| Bus-Id Disp.A | Volatile Uncorr. ECC |
| Fan Temp Perf Pwr:Usage/Cap| Memory-Usage | GPU-Util Compute M. |
|===============================+======================+======================|
| 0 GeForce GTX 1080 Off | 00000000:01:00.0 Off | N/A |
| 27% 29C P8 5W / 180W | 11MiB / 8112MiB | 0% Default |
+-------------------------------+----------------------+----------------------+
| 1 GeForce GTX 1080 Off | 00000000:02:00.0 Off | N/A |
| 0% 58C P0 39W / 210W | 1MiB / 8114MiB | 0% Default |
+-------------------------------+----------------------+----------------------+
| 2 GeForce GTX 1080 Off | 00000000:05:00.0 On | N/A |
| 0% 54C P0 41W / 240W | 10MiB / 8114MiB | 0% Default |
+-------------------------------+----------------------+----------------------+
+-----------------------------------------------------------------------------+
| Processes: GPU Memory |
| GPU PID Type Process name Usage |
|=============================================================================|
| 0 1565 G /usr/lib/xorg/Xorg 8MiB |
| 2 1565 G /usr/lib/xorg/Xorg 7MiB |
+-----------------------------------------------------------------------------+It looks like my GPU 1 (new one) is not fully "working".
Hashcat can control its fan, but when I do:
Code:
nvidia-settings -a [gpu:1]/GPUFanControlState=1 -a [fan-1]/GPUTargetFanSpeed=100my nvidia-smi:
Code:
+-----------------------------------------------------------------------------+
| NVIDIA-SMI 384.98 Driver Version: 384.98 |
|-------------------------------+----------------------+----------------------+
| GPU Name Persistence-M| Bus-Id Disp.A | Volatile Uncorr. ECC |
| Fan Temp Perf Pwr:Usage/Cap| Memory-Usage | GPU-Util Compute M. |
|===============================+======================+======================|
| 0 GeForce GTX 1080 Off | 00000000:01:00.0 Off | N/A |
| 27% 29C P8 6W / 180W | 11MiB / 8112MiB | 0% Default |
+-------------------------------+----------------------+----------------------+
| 1 GeForce GTX 1080 Off | 00000000:02:00.0 Off | N/A |
| 0% 57C P0 39W / 210W | 1MiB / 8114MiB | 0% Default |
+-------------------------------+----------------------+----------------------+
| 2 GeForce GTX 1080 Off | 00000000:05:00.0 On | N/A |
|100% 31C P0 44W / 240W | 10MiB / 8114MiB | 0% Default |
+-------------------------------+----------------------+----------------------+
+-----------------------------------------------------------------------------+
| Processes: GPU Memory |
| GPU PID Type Process name Usage |
|=============================================================================|
| 0 1565 G /usr/lib/xorg/Xorg 8MiB |
| 2 1565 G /usr/lib/xorg/Xorg 7MiB |
+-----------------------------------------------------------------------------+Code:
nvidia-settings -a [gpu:2]/GPUFanControlState=1 -a [fan-2]/GPUTargetFanSpeed=100Code:
ERROR: Error assigning value 100 to attribute 'GPUTargetFanSpeed' (horse-power:0[fan:2]) as
specified in assignment '[fan-2]/GPUTargetFanSpeed=100' (Unknown Error).It looks like GPU number it's not assigned correctly.. any ideas ?
Thanks in advance
RE: Ubuntu 16.04 LTS NVIDIA Setup Guide - philsmd - 11-08-2017
shouldn't you use [fan:1] and [fan:2] instead ?
RE: Ubuntu 16.04 LTS NVIDIA Setup Guide - jimbas - 11-08-2017
Same resault
Code:
nvidia-settings -a [gpu:2]/GPUFanControlState=1 -a [fan:2]/GPUTargetFanSpeed=30
ERROR: Error assigning value 30 to attribute 'GPUTargetFanSpeed' (horse-power:0[fan:2]) as
specified in assignment '[fan:2]/GPUTargetFanSpeed=30' (Unknown Error).New info (don't know if usefull):
Code:
nvidia-xconfig --query-gpu-info
Number of GPUs: 3
GPU #0:
Name : GeForce GTX 1080
UUID : GPU-d2e19eee-589a-b609-5daf-f21754c2829b
PCI BusID : PCI:1:0:0
Number of Display Devices: 0
GPU #1:
Name : GeForce GTX 1080
UUID : GPU-bb9f11c3-be17-d645-e76e-4c4cdf451842
PCI BusID : PCI:2:0:0
Number of Display Devices: 0
GPU #2:
Name : GeForce GTX 1080
UUID : GPU-d0cd4902-e657-cdeb-7d6b-eeb5e273b81e
PCI BusID : PCI:5:0:0
Number of Display Devices: 0
nvidia-smi -q -d PERFORMANCE
==============NVSMI LOG==============
Timestamp : Wed Nov 8 11:13:08 2017
Driver Version : 384.98
Attached GPUs : 3
GPU 00000000:01:00.0
Performance State : P8
Clocks Throttle Reasons
Idle : Active
Applications Clocks Setting : Not Active
SW Power Cap : Not Active
HW Slowdown : Not Active
Sync Boost : Not Active
SW Thermal Slowdown : Not Active
GPU 00000000:02:00.0
Performance State : P0
Clocks Throttle Reasons
Idle : Active
Applications Clocks Setting : Not Active
SW Power Cap : Not Active
HW Slowdown : Not Active
Sync Boost : Not Active
SW Thermal Slowdown : Not Active
GPU 00000000:05:00.0
Performance State : P0
Clocks Throttle Reasons
Idle : Active
Applications Clocks Setting : Not Active
SW Power Cap : Not Active
HW Slowdown : Not Active
Sync Boost : Not Active
SW Thermal Slowdown : Not ActiveAnother thing, I'm using a USB raiser for GPU #1 and #2. The recently added is from a PCIe 8x (regular GPU slot) the other is from a PCIe 2x (smaller slots).
RE: Ubuntu 16.04 LTS NVIDIA Setup Guide - philsmd - 11-08-2017
how did you set up the system? x11 and nvidia-xconfig . Did you set cool-bits etc ?
maybe this is relevant: https://hashcat.net/forum/thread-6036-post-32262.html#pid32262
(even if probably not up to date, but you could test)
My guess is that your 2nd card was not configured correctly with nvidia-xconfig and therefore it doesn't work anymore (or not at all for the second card)
RE: Ubuntu 16.04 LTS NVIDIA Setup Guide - jimbas - 11-08-2017
I followed this guid, the only exception was that since I had the drivers already installed and working I just missed the step for the instalation, all the other steps I did again.
So:
--cool-bits=12
xdm
I had this done previously:
Code:
cat > /etc/X11/xdm/Xsetup << EOF
export PATH=/bin:/usr/bin:/sbin
export HOME=/root
export DISPLAY=:0
xset -dpms
xset s off
xhost +
EOFCode:
sed -i '/Driver/a \ \ \ \ Option "Interactive" "False"' /etc/X11/xorg.confRE: Ubuntu 16.04 LTS NVIDIA Setup Guide - jimbas - 11-08-2017
New information:
Code:
XNVCTRLQueryTargetAttribute() failed.
This error typically occurs when you did not set up NVidia Coolbits.
To fix, run this command:
sudo nvidia-xconfig --cool-bits=12
Do not forget to restart X afterwards.When running hashcat I have this error, but it seems to work normally.. in my xorg I have all devices and screens with "correct" config I think.
I used the above commands to create it
RE: Ubuntu 16.04 LTS NVIDIA Setup Guide - philsmd - 11-08-2017
maybe it's just a problem of communication, but you must make sure that you use all the steps
nvidia-xconfig
sed
nvidia-settings
(and eventually also nvidia-smi to set the power limit)
also see:
https://hashcat.net/forum/thread-4569-post-25931.html#pid25931
https://hashcat.net/forum/thread-5498-post-29740.html#pid29740
(both of these links might already be very old and the settings have changed slightly, but the general idea is still the same)
RE: Ubuntu 16.04 LTS NVIDIA Setup Guide - jimbas - 11-09-2017
Very strange, I can set some values, but not the funspeed...
Code:
nvidia-settings -a [gpu:0]/GPUPowerMizerMode=1 \
> -a [gpu:1]/GPUPowerMizerMode=1 \
> -a [gpu:2]/GPUPowerMizerMode=1 \
> -a [gpu:0]/GPUGraphicsClockOffset[3]=100 \
> -a [gpu:1]/GPUGraphicsClockOffset[3]=100 \
> -a [gpu:2]/GPUGraphicsClockOffset[3]=100 \
> -a [gpu:0]/GPULogoBrightness=0 \
> -a [gpu:1]/GPULogoBrightness=0 \
> -a [gpu:2]/GPULogoBrightness=0 \
> -a [gpu:0]/GPUFanControlState=1 \
> -a [gpu:1]/GPUFanControlState=1 \
> -a [gpu:2]/GPUFanControlState=1 \
> -a [fan:0]/GPUTargetFanSpeed=100 \
> -a [fan:1]/GPUTargetFanSpeed=100 \
> -a [fan:2]/GPUTargetFanSpeed=100
Attribute 'GPUPowerMizerMode' (horse-power:0[gpu:0]) assigned value 1.
Attribute 'GPUPowerMizerMode' (horse-power:0[gpu:1]) assigned value 1.
Attribute 'GPUPowerMizerMode' (horse-power:0[gpu:2]) assigned value 1.
Attribute 'GPUGraphicsClockOffset' (horse-power:0[gpu:1]) assigned value 100.
Attribute 'GPULogoBrightness' (horse-power:0[gpu:0]) assigned value 0.
Attribute 'GPULogoBrightness' (horse-power:0[gpu:1]) assigned value 0.
Attribute 'GPULogoBrightness' (horse-power:0[gpu:2]) assigned value 0.
Attribute 'GPUFanControlState' (horse-power:0[gpu:0]) assigned value 1.
Attribute 'GPUFanControlState' (horse-power:0[gpu:1]) assigned value 1.
Attribute 'GPUTargetFanSpeed' (horse-power:0[fan:0]) assigned value 100.
Attribute 'GPUTargetFanSpeed' (horse-power:0[fan:1]) assigned value 100.
ERROR: Error assigning value 100 to attribute 'GPUTargetFanSpeed' (horse-power:0[fan:2]) as
specified in assignment '[fan:2]/GPUTargetFanSpeed=100' (Unknown Error).RE: Ubuntu 16.04 LTS NVIDIA Setup Guide - atom - 11-12-2017
(11-09-2017, 03:55 PM)jimbas Wrote: Very strange, I can set some values, but not the funspeed...
NV often changes the attribute names (when driver version updates).