![]() |
One of six GPUs has 99% Util and 0 H/s, Progress gets stuck at 99% - Printable Version +- hashcat Forum (https://hashcat.net/forum) +-- Forum: Deprecated; Previous versions (https://hashcat.net/forum/forum-29.html) +--- Forum: Old oclHashcat Support (https://hashcat.net/forum/forum-38.html) +--- Thread: One of six GPUs has 99% Util and 0 H/s, Progress gets stuck at 99% (/thread-3997.html) Pages:
1
2
|
One of six GPUs has 99% Util and 0 H/s, Progress gets stuck at 99% - m0t0 - 01-20-2015 Arch: 64bit OS: Linux GPU: 7 x AMD Sapphire 7970 HD oclHashcat: 1.31 Catalyst: fglrx 14.30.4 The run starts fine. Status looks good. At some point one of the GPU's starts to show 99% Util and 0 H/s, Progress gets stuck at 99% and the job never finishes because it seems to be waiting for the last GPU to finish. I'm already skipping one GPU due to this issue, and now a second is acting up. Command for testing, run should complete in about 25 min. Notice I'm already skipping GPU 6 due to the same issue. oclHashcat64.bin --gpu-devices=1,2,3,4,5,7 --gpu-temp-retain=65 -m 0 notahash -a 3 -1 ?l?u?s?d ?1?1?1?1?1?1?1 Three status are shown below 1. Beginning, all good 2. GPU 4 wedged, other GPUs still working at progress 7% 3. GPU 4 wedged, other GPUs finished with work, progress 99%, will never finish. 1. Beginning, all good Session.Name...: oclHashcat Status.........: Running Input.Mode.....: Mask (?1?1?1?1?1?1?1) [7] Hash.Target....: ffd1ca720c067fadb7b57ee4ab07db05 Hash.Type......: MD5 Time.Started...: Mon Jan 19 15:15:16 2015 (26 secs) Time.Estimated.: Mon Jan 19 15:42:13 2015 (26 mins, 29 secs) Speed.GPU.#1...: 7377.6 MH/s Speed.GPU.#2...: 7374.1 MH/s Speed.GPU.#3...: 7388.7 MH/s Speed.GPU.#4...: 7370.7 MH/s Speed.GPU.#5...: 7392.8 MH/s Speed.GPU.#6...: 7369.9 MH/s Speed.GPU.#*...: 44273.8 MH/s Recovered......: 0/1 (0.00%) Digests, 0/1 (0.00%) Salts Progress.......: 1150984126464/69833729609375 (1.65%) Skipped........: 0/1150984126464 (0.00%) Rejected.......: 0/1150984126464 (0.00%) HWMon.GPU.#1...: 94% Util, 45c Temp, 20% Fan HWMon.GPU.#2...: 94% Util, 48c Temp, 20% Fan HWMon.GPU.#3...: 94% Util, 45c Temp, 20% Fan HWMon.GPU.#4...: 94% Util, 55c Temp, 15% Fan HWMon.GPU.#5...: 94% Util, 44c Temp, 20% Fan HWMon.GPU.#6...: 94% Util, 45c Temp, 20% Fan 2. GPU 4 wedged at progress 7%, other GPUs still normal Session.Name...: oclHashcat Status.........: Running Input.Mode.....: Mask (?1?1?1?1?1?1?1) [7] Hash.Target....: ffd1ca720c067fadb7b57ee4ab07db05 Hash.Type......: MD5 Time.Started...: Mon Jan 19 15:15:16 2015 (2 mins, 1 sec) Time.Estimated.: Mon Jan 19 15:42:05 2015 (24 mins, 46 secs) Speed.GPU.#1...: 7354.0 MH/s Speed.GPU.#2...: 7454.7 MH/s Speed.GPU.#3...: 7327.9 MH/s Speed.GPU.#4...: 0 H/s Speed.GPU.#5...: 7385.6 MH/s Speed.GPU.#6...: 7400.3 MH/s Speed.GPU.#*...: 36922.5 MH/s Recovered......: 0/1 (0.00%) Digests, 0/1 (0.00%) Salts Progress.......: 5287989215232/69833729609375 (7.57%) Skipped........: 0/5287989215232 (0.00%) Rejected.......: 0/5287989215232 (0.00%) HWMon.GPU.#1...: 94% Util, 66c Temp, 15% Fan HWMon.GPU.#2...: 94% Util, 72c Temp, 40% Fan HWMon.GPU.#3...: 94% Util, 64c Temp, 15% Fan HWMon.GPU.#4...: 99% Util, 62c Temp, 15% Fan HWMon.GPU.#5...: 94% Util, 67c Temp, 15% Fan HWMon.GPU.#6...: 93% Util, 66c Temp, 15% Fan 3. GPU 4 wedged, other cards finished with work, progress 99%, will never finish. Session.Name...: oclHashcat Status.........: Running Input.Mode.....: Mask (?1?1?1?1?1?1?1) [7] Hash.Target....: ffd1ca720c067fadb7b57ee4ab07db05 Hash.Type......: MD5 Time.Started...: Mon Jan 19 15:15:16 2015 (31 mins, 44 secs) Time.Estimated.: Mon Jan 19 15:47:09 2015 (7 secs) Speed.GPU.#1...: 0 H/s Speed.GPU.#2...: 0 H/s Speed.GPU.#3...: 0 H/s Speed.GPU.#4...: 0 H/s Speed.GPU.#5...: 0 H/s Speed.GPU.#6...: 0 H/s Speed.GPU.#*...: 0 H/s Recovered......: 0/1 (0.00%) Digests, 0/1 (0.00%) Salts Progress.......: 69544608370335/69833729609375 (99.59%) Skipped........: 0/69544608370335 (0.00%) Rejected.......: 0/69544608370335 (0.00%) HWMon.GPU.#1...: 0% Util, 51c Temp, 15% Fan HWMon.GPU.#2...: 0% Util, 51c Temp, 15% Fan HWMon.GPU.#3...: 0% Util, 57c Temp, 15% Fan HWMon.GPU.#4...: 99% Util, 60c Temp, 15% Fan HWMon.GPU.#5...: 0% Util, 51c Temp, 15% Fan HWMon.GPU.#6...: 0% Util, 50c Temp, 15% Fan RE: One of six GPUs has 99% Util and 0 H/s, Progress gets stuck at 99% - mastercracker - 01-20-2015 Try oclhashcat v1.32 and see if it still occur. RE: One of six GPUs has 99% Util and 0 H/s, Progress gets stuck at 99% - m0t0 - 01-20-2015 (01-20-2015, 04:23 PM)mastercracker Wrote: Try oclhashcat v1.32 and see if it still occur. Thanks for pointing out the new version mastercracker. Just tried oclhashcat v1.32 and get the same result. Here's a status just before and then wedged Session.Name...: oclHashcat Status.........: Running Input.Mode.....: Mask (?1?1?1?1?1?1?1) [7] Hash.Target....: ffd1ca720c067fadb7b57ee4ab07db05 Hash.Type......: MD5 Time.Started...: Tue Jan 20 10:49:31 2015 (2 mins, 5 secs) Time.Estimated.: Tue Jan 20 11:16:04 2015 (24 mins, 26 secs) Speed.GPU.#1...: 7352.2 MH/s Speed.GPU.#2...: 7310.1 MH/s Speed.GPU.#3...: 7379.6 MH/s Speed.GPU.#4...: 7209.6 MH/s Speed.GPU.#5...: 7301.1 MH/s Speed.GPU.#6...: 7442.9 MH/s Speed.GPU.#*...: 43995.5 MH/s Recovered......: 0/1 (0.00%) Digests, 0/1 (0.00%) Salts Progress.......: 5509631442944/69833729609375 (7.89%) Skipped........: 0/5509631442944 (0.00%) Rejected.......: 0/5509631442944 (0.00%) HWMon.GPU.#1...: 94% Util, 67c Temp, 15% Fan HWMon.GPU.#2...: 93% Util, 73c Temp, 61% Fan HWMon.GPU.#3...: 94% Util, 65c Temp, 15% Fan HWMon.GPU.#4...: 96% Util, 62c Temp, 41% Fan HWMon.GPU.#5...: 94% Util, 68c Temp, 15% Fan HWMon.GPU.#6...: 94% Util, 67c Temp, 15% Fan [s]tatus [p]ause [r]esume [b]ypass [q]uit => s Session.Name...: oclHashcat Status.........: Running Input.Mode.....: Mask (?1?1?1?1?1?1?1) [7] Hash.Target....: ffd1ca720c067fadb7b57ee4ab07db05 Hash.Type......: MD5 Time.Started...: Tue Jan 20 10:49:31 2015 (2 mins, 8 secs) Time.Estimated.: Tue Jan 20 11:16:10 2015 (24 mins, 29 secs) Speed.GPU.#1...: 7349.4 MH/s Speed.GPU.#2...: 7311.1 MH/s Speed.GPU.#3...: 7303.3 MH/s Speed.GPU.#4...: 0 H/s Speed.GPU.#5...: 7373.7 MH/s Speed.GPU.#6...: 7396.5 MH/s Speed.GPU.#*...: 36734.0 MH/s Recovered......: 0/1 (0.00%) Digests, 0/1 (0.00%) Salts Progress.......: 5619555762176/69833729609375 (8.05%) Skipped........: 0/5619555762176 (0.00%) Rejected.......: 0/5619555762176 (0.00%) HWMon.GPU.#1...: 94% Util, 68c Temp, 15% Fan HWMon.GPU.#2...: 93% Util, 73c Temp, 76% Fan HWMon.GPU.#3...: 94% Util, 65c Temp, 15% Fan HWMon.GPU.#4...: 99% Util, 61c Temp, 15% Fan HWMon.GPU.#5...: 94% Util, 68c Temp, 15% Fan HWMon.GPU.#6...: 94% Util, 67c Temp, 15% Fan RE: One of six GPUs has 99% Util and 0 H/s, Progress gets stuck at 99% - ati6990 - 01-20-2015 only see 6 gpus ? what happened to 7 ?= burned ? RE: One of six GPUs has 99% Util and 0 H/s, Progress gets stuck at 99% - m0t0 - 01-20-2015 (01-20-2015, 10:14 PM)ati6990 Wrote: only see 6 gpus ? what happened to 7 ?= burned ? I first had the problem with GPU 6, and now having the same problem with GPU 4. Still not sure if a hardware problem or software bug. They seem to work initially then get wedged a few minutes into a run. I use the --gpu-devices switch to list the cards that aren't getting wedged which is now 1,2,3,5,7 At the start of a run you can see this as below. It's a little confusing in the status output which lists them sequentially without indicating the skips. oclHashcat v1.32 starting... Device #1: Tahiti, 2876MB, 925Mhz, 32MCU Device #2: Tahiti, 3022MB, 925Mhz, 32MCU Device #3: Tahiti, 3022MB, 925Mhz, 32MCU Device #4: skipped by user Device #5: Tahiti, 3022MB, 925Mhz, 32MCU Device #6: skipped by user Device #7: Tahiti, 3022MB, 925Mhz, 32MCU RE: One of six GPUs has 99% Util and 0 H/s, Progress gets stuck at 99% - TheDarkOne - 01-21-2015 @m0t0 It seems your GPUs are dying...at least from what you've described so far. Have you tried to isolate GPU 4 and 6 and run oclHashcat only with those 2? Or can you test those two Cards in a seperate Machine? This should quickly clarifiy if its the Hardware thats dying or if its oclHashcat. Kind Regards RE: One of six GPUs has 99% Util and 0 H/s, Progress gets stuck at 99% - m0t0 - 01-21-2015 (01-21-2015, 10:31 AM)TheDarkOne Wrote: @m0t0 Thanks TheDarkOne, good idea. I just ran the test isolating GPU 4 and 6 and they completed without issue. One more thing I've noticed about this issue is that once it occurs job control is lost. I cannot [q]uit and even trying to sudo kill -9 the pid just results in a defunct process. RE: One of six GPUs has 99% Util and 0 H/s, Progress gets stuck at 99% - ati6990 - 01-22-2015 hmm have you checked out all special settings on your motherboard ? do yoou have raizzerz for your cards, the first time i test them , was the last time i ever wanna test some... RE: One of six GPUs has 99% Util and 0 H/s, Progress gets stuck at 99% - KT819GM - 01-22-2015 Also it can be too high clocks for gpu/ram or too low ram clock, also PSU problems can behave like that. What I would try is just to lower clocks a bit. Besides on your card's you should get a bit higher MH/s if they are on stock clocks (1000MHz?) so maybe cooling problems occur and they start throttling clocks and this sometimes is the reason for ASIC hang. RE: One of six GPUs has 99% Util and 0 H/s, Progress gets stuck at 99% - m0t0 - 01-22-2015 (01-22-2015, 11:36 AM)ati6990 Wrote: hmm have you checked out all special settings on your motherboard ? do yoou have raizzerz for your cards, the first time i test them , was the last time i ever wanna test some... Thanks @ati6990, no risers. Will review motherboard settings. |