+- hashcat Forum (https://hashcat.net/forum)
+-- Forum: Deprecated; Previous versions (https://hashcat.net/forum/forum-29.html)
+--- Forum: Old oclHashcat Support (https://hashcat.net/forum/forum-38.html)
+--- Thread: "bug!!" in output / ocl v1.36 (/thread-4560.html)
Pages:
1
2
"bug!!" in output / ocl v1.36 - Mem5 - 07-25-2015
Hello,
Fresh install of Windwos 8.1, Catalyst 14.9, on Radeon R9 290
Apparently (?) same bug as https://hashcat.net/trac/ticket/593
Running oclhashcat 1.36, cmdline :
Code:
oclHashcat64.exe -m 0 --debug-mode 4 --debug-file debugFileRules.txt --gpu-temp-abort=90 -w 3 -o res.txt hashes.txt *.dic -r best64.ruleCode:
oclHashcat v1.36 starting...
Removing duplicate hashes...
Comparing hashes with potfile entries...
Structuring salts for cracking task...
Generating bitmap tables with 16 bits...
WARN: ADL_Overdrive6_FanSpeed_Get(): -5
Device #1: Hawaii, 3072MB, 957Mhz, 40MCU
Hashes: 689 hashes; 689 unique digests, 1 unique salts
Bitmaps: 16 bits, 65536 entries, 0x0000ffff mask, 262144 bytes, 5/13 rotates
Rules: 64
Applicable Optimizers:
* Zero-Byte
* Precompute-Init
* Precompute-Merkle-Demgard
* Meet-In-The-Middle
* Early-Skip
* Not-Salted
* Not-Iterated
* Single-Salt
* Scalar-Mode
* Raw-Hash
Watchdog: Temperature abort trigger set to 90c
Watchdog: Temperature retain trigger set to 80c
Device #1: Kernel D:\oclHashcat-1.36/kernels/4098/m00000_a0.Hawaii_1573.4_1573.4 (VM)_1429981600.kernel (522776 bytes)
Checking for weak hashes...
Cache-hit dictionary stats D:\**.dic: 14001010 bytes, 2214275 words, 398569500 keyspace
[s]tatus [p]ause [r]esume ypass [q]uit => bug!!
bug!!
bug!!
bug!!
bug!!
......
<Ctrl+C>Note 1 : can it be related to my "WARN: ADL_Overdrive6_FanSpeed_Get(): -5" issue ? (https://hashcat.net/forum/thread-4559.html)
Note 2 : same buggy behaviour with v1.35. But works OK with v1.31
Thank you for your help !
RE: "bug!!" in output / ocl v1.36 - epixoip - 07-25-2015
I doubt it's related to ADL, as I've recently had a client receive the "bug!!" message on Nvidia as well (4x GTX 980.) Trying to help them reproduce the bug, but so far haven't.
RE: "bug!!" in output / ocl v1.36 - Mem5 - 07-26-2015
Same error (randomly) with this command line (wpa) :
oclHashcat-1.36\oclHashcat64.exe --remove --gpu-temp-abort=90 -w 3 -m 2500 -o res.txt aaa.hccap *.dic
RE: "bug!!" in output / ocl v1.36 - Mem5 - 07-28-2015
Please note that version 1.35 gives much less error "bug!!" than 1.36.
I hope it will help you !
RE: "bug!!" in output / ocl v1.36 - Mem5 - 08-23-2015
v1.37 also gives me, randomly, the "bug!!" output.
Do you have any ideas of the problem ?
RE: "bug!!" in output / ocl v1.36 - Mem5 - 08-23-2015
Hum, I found where it may comes from : one of my wordlist.
A word inside certainly causes ocl v1.37 an lower to crash (prints bug!!)
Any idea how to spot it ?
I used ULM to clean it : purge unicode chars. It did not helps.
RE: "bug!!" in output / ocl v1.36 - atom - 08-23-2015
Can you send me that dictionary please. I need it for reproduce the problem
RE: "bug!!" in output / ocl v1.36 - Mem5 - 08-23-2015
Sent to PM.
RE: "bug!!" in output / ocl v1.36 - Mem5 - 08-23-2015
Tested with :
v1.31 : OK
v1.32 : OK
v1.33 : bug
v1.34 : bug
v1.35 : bug
v1.36 : bug
v1.37 : bug
RE: "bug!!" in output / ocl v1.36 - atom - 08-24-2015
Thanks for the wordlist! I've tried to reproduce but can not. For me it works well:
Quote:root@et:~/oclHashcat-1.38# ./oclHashcat64.bin --remove --gpu-temp-abort=90 -w 3 -m 2500 -o res.txt hashcat.hccap *.dic
oclHashcat v1.38 starting...
Device #1: Hawaii, 4033MB, 1000Mhz, 44MCU
Device #2: Hawaii, 4033MB, 1000Mhz, 44MCU
Device #3: Hawaii, 4033MB, 1000Mhz, 44MCU
Device #4: Hawaii, 4033MB, 1000Mhz, 44MCU
Device #5: Hawaii, 4033MB, 1000Mhz, 44MCU
Device #6: Hawaii, 4033MB, 1000Mhz, 44MCU
Hashes: 1 hashes; 1 unique digests, 1 unique salts
Bitmaps: 16 bits, 65536 entries, 0x0000ffff mask, 262144 bytes, 5/13 rotates
Rules: 1
Applicable Optimizers:
* Zero-Byte
* Single-Hash
* Single-Salt
Watchdog: Temperature abort trigger set to 90c
Watchdog: Temperature retain trigger set to 80c
Device #1: Kernel ./kernels/4098/m02500.Hawaii_1800.5_1800.5 (VM)_1440401202.kernel (255256 bytes)
Device #1: Kernel ./kernels/4098/amp_a0_v1.Hawaii_1800.5_1800.5 (VM)_1440401202.kernel (243072 bytes)
Device #2: Kernel ./kernels/4098/m02500.Hawaii_1800.5_1800.5 (VM)_1440401202.kernel (255256 bytes)
Device #2: Kernel ./kernels/4098/amp_a0_v1.Hawaii_1800.5_1800.5 (VM)_1440401202.kernel (243072 bytes)
Device #3: Kernel ./kernels/4098/m02500.Hawaii_1800.5_1800.5 (VM)_1440401202.kernel (255256 bytes)
Device #3: Kernel ./kernels/4098/amp_a0_v1.Hawaii_1800.5_1800.5 (VM)_1440401202.kernel (243072 bytes)
Device #4: Kernel ./kernels/4098/m02500.Hawaii_1800.5_1800.5 (VM)_1440401202.kernel (255256 bytes)
Device #4: Kernel ./kernels/4098/amp_a0_v1.Hawaii_1800.5_1800.5 (VM)_1440401202.kernel (243072 bytes)
Device #5: Kernel ./kernels/4098/m02500.Hawaii_1800.5_1800.5 (VM)_1440401202.kernel (255256 bytes)
Device #5: Kernel ./kernels/4098/amp_a0_v1.Hawaii_1800.5_1800.5 (VM)_1440401202.kernel (243072 bytes)
Device #6: Kernel ./kernels/4098/m02500.Hawaii_1800.5_1800.5 (VM)_1440401202.kernel (255256 bytes)
Device #6: Kernel ./kernels/4098/amp_a0_v1.Hawaii_1800.5_1800.5 (VM)_1440401202.kernel (243072 bytes)
Cache-hit dictionary stats dic_mem5.dic: 3934411 bytes, 362276 words, 362276 keyspace
ATTENTION!
The wordlist or mask you are using is too small.
Therefore, oclHashcat is unable to utilize the full parallelization power of your GPU(s).
The cracking speed will drop.
Workaround: https://hashcat.net/wiki/doku.php?id=frequently_asked_questions#how_to_create_more_work_for_full_speed
INFO: approaching final keyspace, workload adjusted
Session.Name...: oclHashcat
Status.........: Exhausted
Input.Mode.....: File (dic_mem5.dic)
Hash.Target....: hashcat.net (00:25:cf:2d:b4:89 <-> b0:48:7a:d6:76:e2)
Hash.Type......: WPA/WPA2
Time.Started...: 0 secs
Time.Estimated.: 0 secs
Speed.GPU.#1...: 178.7 kH/s
Speed.GPU.#2...: 147.5 kH/s
Speed.GPU.#3...: 177.5 kH/s
Speed.GPU.#4...: 131.6 kH/s
Speed.GPU.#5...: 169.5 kH/s
Speed.GPU.#6...: 136.7 kH/s
Speed.GPU.#*...: 941.4 kH/s
Recovered......: 0/1 (0.00%) Digests, 0/1 (0.00%) Salts
Progress.......: 362276/362276 (100.00%)
Rejected.......: 126371/362276 (34.88%)
HWMon.GPU.#1...: 0% Util, 56c Temp, 20% Fan
HWMon.GPU.#2...: 0% Util, 42c Temp, 20% Fan
HWMon.GPU.#3...: 0% Util, 42c Temp, 20% Fan
HWMon.GPU.#4...: 0% Util, 39c Temp, 20% Fan
HWMon.GPU.#5...: 0% Util, 44c Temp, 20% Fan
HWMon.GPU.#6...: 0% Util, 44c Temp, 20% Fan
Started: Mon Aug 24 10:00:37 2015
Stopped: Mon Aug 24 10:00:41 2015
Note this is v1.38 beta but it's exactly the same as v1.37