hashcat Forum
HD6870 & HD5970 with WPA - Printable Version

+- hashcat Forum (https://hashcat.net/forum)
+-- Forum: Deprecated; Previous versions (https://hashcat.net/forum/forum-29.html)
+--- Forum: Old oclHashcat Support (https://hashcat.net/forum/forum-38.html)
+--- Thread: HD6870 & HD5970 with WPA (/thread-4842.html)



HD6870 & HD5970 with WPA - Flyinghaggis - 11-24-2015

Hi, I have a setup with both of these cards installed in my system, but
I have a problem with the gpu kh/s speed

Session.Name...: oclHashcat
Status.........: Aborted
Input.Mode.....: Pipe
Hash.Target....: blah blahblah
Hash.Type......: WPA/WPA2
Time.Started...: Tue Nov 24 10:57:38 2015 (7 mins, 22 secs)
Speed.GPU.#1...:    31419 H/s
Speed.GPU.#2...:    41184 H/s
Speed.GPU.#3...:    45672 H/s
Speed.GPU.#*...:   118.3 kH/s
Recovered......: 0/1 (0.00%) Digests, 0/1 (0.00%) Salts
Progress.......: 56033280
Rejected.......: 0
HWMon.GPU.#1...: 44% Util, 79c Temp, 41% Fan
HWMon.GPU.#2...: 51% Util, 73c Temp, N/A Fan
HWMon.GPU.#3...: 43% Util, 81c Temp, 51% Fan

I have set the gpu loop to n 32 u 320.
Are these settings correct/acceptable or can I squeeze some more power out of the gpu's?


RE: HD6870 & HD5970 with WPA - epixoip - 11-24-2015

Your -n/-u values do not make any sense. Just use -w 3 instead.


RE: HD6870 & HD5970 with WPA - rico - 11-24-2015

You should be getting around 165 kH/s WPA from the 5970 (more if overclocked) so if you get that using -w 3 then you're done.


RE: HD6870 & HD5970 with WPA - Flyinghaggis - 11-24-2015

thank you there is a slight improvement -
the values were taken from another thread regarding the hd79990.


RE: HD6870 & HD5970 with WPA - Flyinghaggis - 11-24-2015

Yes that is what I thought but I am no where near it even with the - w 3

Is it possible that because I am piping another exe to it that this may slow the speed down?


RE: HD6870 & HD5970 with WPA - rico - 11-24-2015

Yeah, the 165 kH/s rate is for brute force -a 3 mode. Other modes may be slower.