hashcat Forum
second 1070 not seen (linux) - Printable Version

+- hashcat Forum (https://hashcat.net/forum)
+-- Forum: Misc (https://hashcat.net/forum/forum-15.html)
+--- Forum: Hardware (https://hashcat.net/forum/forum-13.html)
+--- Thread: second 1070 not seen (linux) (/thread-5871.html)

second 1070 not seen (linux) - bastibasti - 09-14-2016

Hi guys,

I've installed the second 1070 today via pciex16 (full) riser.

The cards are not connected via SLI. However the system doesnt recognize the second card.

Any idea - since you guys handle multiple gpus regularily? Some Mobo setting necessary? (The board is a P5B-deluxe)

Code:
==============NVSMI LOG==============

Timestamp                           : Wed Sep 14 08:55:15 2016
Driver Version                      : 370.28

Attached GPUs                       : 1


RE: second 1070 not seen (linux) - jodler303 - 09-14-2016

is it shown in lspci ?

RE: second 1070 not seen (linux) - bastibasti - 09-14-2016

Yes, indeed. First thing I checked...

Sorry did not send this info

I think its a 32bit kernel issue

[    8.864017] vmap allocation for size 16781312 failed: use vmalloc=<size> to increase size.
ftp://download.nvidia.com/XFree86/Linux-x86/260.19.12/README/knownissues.html

Might try changing the kernel to 64 bits now


Code:
00:00.0 Host bridge: Intel Corporation 82P965/G965 Memory Controller Hub (rev 02)
00:01.0 PCI bridge: Intel Corporation 82P965/G965 PCI Express Root Port (rev 02)
00:1a.0 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 (rev 02)
00:1a.1 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 02)
00:1a.7 USB controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 02)
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 02)
00:1c.4 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 5 (rev 02)
00:1c.5 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 6 (rev 02)
00:1d.0 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 02)
00:1d.1 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 02)
00:1d.2 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 (rev 02)
00:1d.7 USB controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev f2)
00:1f.0 ISA bridge: Intel Corporation 82801HB/HR (ICH8/R) LPC Interface Controller (rev 02)
00:1f.2 IDE interface: Intel Corporation 82801H (ICH8 Family) 4 port SATA Controller [IDE mode] (rev 02)
00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 02)
00:1f.5 IDE interface: Intel Corporation 82801HR/HO/HH (ICH8R/DO/DH) 2 port SATA Controller [IDE mode] (rev 02)
01:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
01:00.1 Audio device: NVIDIA Corporation Device 10f0 (rev a1)
02:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8056 PCI-E Gigabit Ethernet Controller (rev 12)
03:00.0 SATA controller: JMicron Technology Corp. JMB363 SATA/IDE Controller (rev 02)
03:00.1 IDE interface: JMicron Technology Corp. JMB363 SATA/IDE Controller (rev 02)
04:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
04:00.1 Audio device: NVIDIA Corporation Device 10f0 (rev a1)
05:03.0 FireWire (IEEE 1394): Texas Instruments TSB43AB22A IEEE-1394a-2000 Controller (PHY/Link) [iOHCI-Lynx]
05:04.0 Ethernet controller: Marvell Technology Group Ltd. 88E8001 Gigabit Ethernet Controller (rev 14)


Code:
client1 linux # dmesg
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.4.6-gentoo (root@client1) (gcc version 4.9.3 (Gentoo 4.9.3 p1.5, pie-0.6.4) ) #1 SMP Fri Sep 2 07:56:06 Local time zone must be set--see zic m
[    0.000000] x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers'
[    0.000000] x86/fpu: Enabled xstate features 0x3, context size is 576 bytes, using 'standard' format.
[    0.000000] x86/fpu: Using 'lazy' FPU context switches.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000aff8ffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000aff90000-0x00000000aff9dfff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000aff9e000-0x00000000affdffff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000affe0000-0x00000000afffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved
[    0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
[    0.000000] SMBIOS 2.4 present.
[    0.000000] DMI: System manufacturer System Product Name/P5B-Deluxe, BIOS 1238    09/30/2008
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0xaff90 max_arch_pfn = 0x100000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-DFFFF uncachable
[    0.000000]   E0000-EFFFF write-through
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F80000000 write-back
[    0.000000]   1 base 080000000 mask FE0000000 write-back
[    0.000000]   2 base 0A0000000 mask FF0000000 write-back
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
[    0.000000] initial memory mapped: [mem 0x00000000-0x01ffffff]
[    0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[    0.000000] BRK [0x01a56000, 0x01a56fff] PGTABLE
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000FAE70 000014 (v00 ACPIAM)
[    0.000000] ACPI: RSDT 0x00000000AFF90000 000038 (v01 MSTEST TESTONLY 09000830 MSFT 00000097)
[    0.000000] ACPI: FACP 0x00000000AFF90200 000084 (v02 MSTEST OEMFACP  09000830 MSFT 00000097)
[    0.000000] ACPI: DSDT 0x00000000AFF905C0 00918E (v01 A0483  A0483035 00000035 INTL 20060113)
[    0.000000] ACPI: FACS 0x00000000AFF9E000 000040
[    0.000000] ACPI: APIC 0x00000000AFF90390 00006C (v01 MSTEST OEMAPIC  09000830 MSFT 00000097)
[    0.000000] ACPI: MCFG 0x00000000AFF90400 00003C (v01 MSTEST OEMMCFG  09000830 MSFT 00000097)
[    0.000000] ACPI: OEMB 0x00000000AFF9E040 00007B (v01 MSTEST AMI_OEM  09000830 MSFT 00000097)
[    0.000000] ACPI: HPET 0x00000000AFF99750 000038 (v01 MSTEST OEMHPET  09000830 MSFT 00000097)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 1927MB HIGHMEM available.
[    0.000000] 887MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 377fe000
[    0.000000]   low ram: 0 - 377fe000
[    0.000000] BRK [0x01a57000, 0x01a57fff] PGTABLE
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   Normal   [mem 0x0000000001000000-0x00000000377fdfff]
[    0.000000]   HighMem  [mem 0x00000000377fe000-0x00000000aff8ffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000aff8ffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x00000000aff8ffff]
[    0.000000] On node 0 totalpages: 720686
[    0.000000]   DMA zone: 36 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   Normal zone: 1962 pages used for memmap
[    0.000000]   Normal zone: 223230 pages, LIFO batch:31
[    0.000000]   HighMem zone: 493458 pages, LIFO batch:31
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] e820: [mem 0xb0000000-0xfedfffff] available for PCI devices
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] PERCPU: Embedded 18 pages/cpu @f5eea000 s44364 r0 d29364 u73728
[    0.000000] pcpu-alloc: s44364 r0 d29364 u73728 alloc=18*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 718688
[    0.000000] Kernel command line: auto BOOT_IMAGE=Gentoo ro root=806 net.ifnames=0 panic=10 rootfstype=ext4
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] Initializing HighMem for node 0 (000377fe:000aff90)
[    0.000000] Initializing Movable for node 0 (00000000:00000000)
[    0.000000] Memory: 2845604K/2882744K available (5890K kernel code, 664K rwdata, 2380K rodata, 696K init, 880K bss, 37140K reserved, 0K cma-reserved, 1973832K highmem)
[    0.000000] virtual kernel memory layout:
                  fixmap  : 0xfff17000 - 0xfffff000   ( 928 kB)
                  pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
                  vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
                  lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
                    .init : 0xc18bd000 - 0xc196b000   ( 696 kB)
                    .data : 0xc15c0e62 - 0xc18bb180   (3048 kB)
                    .text : 0xc1000000 - 0xc15c0e62   (5891 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] Hierarchical RCU implementation.
[    0.000000] Build-time adjustment of leaf fanout to 32.
[    0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=4
[    0.000000] NR_IRQS:2304 nr_irqs:456 16
[    0.000000] CPU 0 irqstacks, hard=f582c000 soft=f582e000
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 2666.542 MHz processor
[    0.010009] Calibrating delay loop (skipped), value calculated using timer frequency.. 5333.08 BogoMIPS (lpj=26665420)
[    0.010253] pid_max: default: 32768 minimum: 301
[    0.010384] ACPI: Core revision 20150930
[    0.026030] ACPI: 1 ACPI AML tables successfully acquired and loaded
[    0.026239] Security Framework initialized
[    0.026362] SELinux:  Initializing.
[    0.026500] SELinux:  Starting in permissive mode
[    0.026513] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.026636] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.027024] Initializing cgroup subsys io
[    0.027150] Initializing cgroup subsys memory
[    0.027279] Initializing cgroup subsys devices
[    0.027402] Initializing cgroup subsys freezer
[    0.027527] Initializing cgroup subsys net_cls
[    0.027650] Initializing cgroup subsys perf_event
[    0.027791] CPU: Physical Processor ID: 0
[    0.027913] CPU: Processor Core ID: 0
[    0.028038] mce: CPU supports 6 MCE banks
[    0.028165] process: using mwait in idle threads
[    0.028294] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
[    0.028416] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
[    0.028744] Freeing SMP alternatives memory: 24K (c196b000 - c1971000)
[    0.030013] ftrace: allocating 24041 entries in 47 pages
[    0.040093] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.040573] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.150000] smpboot: CPU0: Intel(R) Core(TM)2 Quad CPU    Q9400  @ 2.66GHz (family: 0x6, model: 0x17, stepping: 0xa)
[    0.150000] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
[    0.150000] ... version:                2
[    0.150000] ... bit width:              40
[    0.150000] ... generic registers:      2
[    0.150000] ... value mask:             000000ffffffffff
[    0.150000] ... max period:             000000007fffffff
[    0.150000] ... fixed-purpose events:   3
[    0.150000] ... event mask:             0000000700000003
[    0.150000] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.150000] CPU 1 irqstacks, hard=f5a02000 soft=f5a04000
[    0.150000] x86: Booting SMP configuration:
[    0.150000] .... node  #0, CPUs:      #1
[    0.020000] Initializing CPU#1
[    0.150000] CPU 2 irqstacks, hard=f5a40000 soft=f5a42000
[    0.150000]  #2
[    0.020000] Initializing CPU#2
[    0.150000] CPU 3 irqstacks, hard=f5a7a000 soft=f5a7c000
[    0.150000]  #3
[    0.020000] Initializing CPU#3
[    0.150016] x86: Booted up 1 node, 4 CPUs
[    0.150389] smpboot: Total of 4 processors activated (21332.33 BogoMIPS)
[    0.153514] devtmpfs: initialized
[    0.153514] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.153514] NET: Registered protocol family 16
[    0.153514] EISA bus registered
[    0.180004] cpuidle: using governor ladder
[    0.200004] cpuidle: using governor menu
[    0.200233] ACPI: bus type PCI registered
[    0.200403] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.200614] PCI: not using MMCONFIG
[    0.201092] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=5
[    0.201215] PCI: Using configuration type 1 for base access
[    0.230091] ACPI: Added _OSI(Module Device)
[    0.230216] ACPI: Added _OSI(Processor Device)
[    0.230338] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.230460] ACPI: Added _OSI(Processor Aggregator Device)
[    0.232532] ACPI: Executed 1 blocks of module-level executable AML code
[    0.238187] ACPI: Dynamic OEM Table Load:
[    0.238376] ACPI: SSDT 0x00000000F5AD2000 0001C6 (v01 AMI    CPU1PM   00000001 INTL 20060113)
[    0.239085] ACPI: Dynamic OEM Table Load:
[    0.239273] ACPI: SSDT 0x00000000F5B14E00 00013A (v01 AMI    CPU2PM   00000001 INTL 20060113)
[    0.240428] ACPI: Dynamic OEM Table Load:
[    0.240616] ACPI: SSDT 0x00000000F5B14C00 00013A (v01 AMI    CPU3PM   00000001 INTL 20060113)
[    0.241315] ACPI: Dynamic OEM Table Load:
[    0.241502] ACPI: SSDT 0x00000000F5B14A00 00013A (v01 AMI    CPU4PM   00000001 INTL 20060113)
[    0.242189] ACPI: Interpreter enabled
[    0.244415] ACPI: (supports S0 S5)
[    0.244536] ACPI: Using IOAPIC for interrupt routing
[    0.244686] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.245371] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[    0.245583] PCI: Using MMCONFIG for extended config space
[    0.245711] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.252211] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.252338] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.252552] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    0.252813] PCI host bridge to bus 0000:00
[    0.252937] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.253061] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.253185] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.253396] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window]
[    0.253606] pci_bus 0000:00: root bus resource [mem 0xb0000000-0xffffffff window]
[    0.253816] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.253946] pci 0000:00:00.0: [8086:29a0] type 00 class 0x060000
[    0.254047] pci 0000:00:01.0: [8086:29a1] type 01 class 0x060400
[    0.254082] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.254177] pci 0000:00:1a.0: [8086:2834] type 00 class 0x0c0300
[    0.254213] pci 0000:00:1a.0: reg 0x20: [io  0x9880-0x989f]
[    0.254306] pci 0000:00:1a.1: [8086:2835] type 00 class 0x0c0300
[    0.254342] pci 0000:00:1a.1: reg 0x20: [io  0x9c00-0x9c1f]
[    0.254440] pci 0000:00:1a.7: [8086:283a] type 00 class 0x0c0320
[    0.254462] pci 0000:00:1a.7: reg 0x10: [mem 0xf7fffc00-0xf7ffffff]
[    0.254524] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[    0.254606] pci 0000:00:1b.0: [8086:284b] type 00 class 0x040300
[    0.254629] pci 0000:00:1b.0: reg 0x10: [mem 0xf7ff8000-0xf7ffbfff 64bit]
[    0.254682] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.254760] pci 0000:00:1c.0: [8086:283f] type 01 class 0x060400
[    0.254820] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.254906] pci 0000:00:1c.4: [8086:2847] type 01 class 0x060400
[    0.254966] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    0.255049] pci 0000:00:1c.5: [8086:2849] type 01 class 0x060400
[    0.255109] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[    0.255190] pci 0000:00:1d.0: [8086:2830] type 00 class 0x0c0300
[    0.255225] pci 0000:00:1d.0: reg 0x20: [io  0x9400-0x941f]
[    0.255318] pci 0000:00:1d.1: [8086:2831] type 00 class 0x0c0300
[    0.255353] pci 0000:00:1d.1: reg 0x20: [io  0x9480-0x949f]
[    0.255443] pci 0000:00:1d.2: [8086:2832] type 00 class 0x0c0300
[    0.255479] pci 0000:00:1d.2: reg 0x20: [io  0x9800-0x981f]
[    0.255578] pci 0000:00:1d.7: [8086:2836] type 00 class 0x0c0320
[    0.255601] pci 0000:00:1d.7: reg 0x10: [mem 0xf7fff800-0xf7fffbff]
[    0.255662] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.255740] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[    0.255856] pci 0000:00:1f.0: [8086:2810] type 00 class 0x060100
[    0.255933] pci 0000:00:1f.0: can't claim BAR 13 [io  0x0800-0x087f]: address conflict with ACPI CPU throttle [io  0x0810-0x0815]
[    0.256149] pci 0000:00:1f.0: quirk: [io  0x0480-0x04bf] claimed by ICH6 GPIO
[    0.256275] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003)
[    0.256576] pci 0000:00:1f.2: [8086:2820] type 00 class 0x01018f
[    0.256592] pci 0000:00:1f.2: reg 0x10: [io  0x8400-0x8407]
[    0.256599] pci 0000:00:1f.2: reg 0x14: [io  0x8080-0x8083]
[    0.256605] pci 0000:00:1f.2: reg 0x18: [io  0x8000-0x8007]
[    0.256612] pci 0000:00:1f.2: reg 0x1c: [io  0x7c00-0x7c03]
[    0.256619] pci 0000:00:1f.2: reg 0x20: [io  0x7880-0x788f]
[    0.256626] pci 0000:00:1f.2: reg 0x24: [io  0x7800-0x780f]
[    0.256647] pci 0000:00:1f.2: PME# supported from D3hot
[    0.256722] pci 0000:00:1f.3: [8086:283e] type 00 class 0x0c0500
[    0.256734] pci 0000:00:1f.3: reg 0x10: [mem 0x00000000-0x000000ff]
[    0.256757] pci 0000:00:1f.3: reg 0x20: [io  0x0400-0x041f]
[    0.256843] pci 0000:00:1f.5: [8086:2825] type 00 class 0x010185
[    0.256859] pci 0000:00:1f.5: reg 0x10: [io  0x9080-0x9087]
[    0.256866] pci 0000:00:1f.5: reg 0x14: [io  0x9000-0x9003]
[    0.256872] pci 0000:00:1f.5: reg 0x18: [io  0x8c00-0x8c07]
[    0.256879] pci 0000:00:1f.5: reg 0x1c: [io  0x8880-0x8883]
[    0.256886] pci 0000:00:1f.5: reg 0x20: [io  0x8800-0x880f]
[    0.256893] pci 0000:00:1f.5: reg 0x24: [io  0x8480-0x848f]
[    0.256914] pci 0000:00:1f.5: PME# supported from D3hot
[    0.257027] pci 0000:01:00.0: [10de:1b81] type 00 class 0x030000
[    0.257048] pci 0000:01:00.0: reg 0x10: [mem 0xf8000000-0xf8ffffff]
[    0.257059] pci 0000:01:00.0: reg 0x14: [mem 0xb0000000-0xbfffffff 64bit pref]
[    0.257070] pci 0000:01:00.0: reg 0x1c: [mem 0xcc000000-0xcdffffff 64bit pref]
[    0.257078] pci 0000:01:00.0: reg 0x24: [io  0xac00-0xac7f]
[    0.257085] pci 0000:01:00.0: reg 0x30: [mem 0xf9d00000-0xf9d7ffff pref]
[    0.257179] pci 0000:01:00.1: [10de:10f0] type 00 class 0x040300
[    0.257200] pci 0000:01:00.1: reg 0x10: [mem 0xf9dfc000-0xf9dfffff]
[    0.257321] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.257445] pci 0000:00:01.0:   bridge window [io  0xa000-0xafff]
[    0.257448] pci 0000:00:01.0:   bridge window [mem 0xf8000000-0xf9dfffff]
[    0.257451] pci 0000:00:01.0:   bridge window [mem 0xb0000000-0xcdffffff 64bit pref]
[    0.257506] pci 0000:04:00.0: [10de:1b81] type 00 class 0x030000
[    0.257533] pci 0000:04:00.0: reg 0x10: [mem 0xfa000000-0xfaffffff]
[    0.257545] pci 0000:04:00.0: reg 0x14: [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.257557] pci 0000:04:00.0: reg 0x1c: [mem 0xce000000-0xcfffffff 64bit pref]
[    0.257565] pci 0000:04:00.0: reg 0x24: [io  0xdc00-0xdc7f]
[    0.257573] pci 0000:04:00.0: reg 0x30: [mem 0xfbe00000-0xfbe7ffff pref]
[    0.257690] pci 0000:04:00.1: [10de:10f0] type 00 class 0x040300
[    0.257719] pci 0000:04:00.1: reg 0x10: [mem 0xfbefc000-0xfbefffff]
[    0.270021] pci 0000:00:1c.0: PCI bridge to [bus 04]
[    0.270149] pci 0000:00:1c.0:   bridge window [io  0xd000-0xdfff]
[    0.270153] pci 0000:00:1c.0:   bridge window [mem 0xfa000000-0xfbefffff]
[    0.270159] pci 0000:00:1c.0:   bridge window [mem 0xce000000-0xdfffffff 64bit pref]
[    0.270231] pci 0000:03:00.0: [197b:2363] type 00 class 0x010185
[    0.270328] pci 0000:03:00.0: reg 0x24: [mem 0xf9ffe000-0xf9ffffff]
[    0.270340] pci 0000:03:00.0: reg 0x30: [mem 0xf9fe0000-0xf9feffff pref]
[    0.270381] pci 0000:03:00.0: PME# supported from D3hot
[    0.270447] pci 0000:03:00.1: [197b:2363] type 00 class 0x010185
[    0.270475] pci 0000:03:00.1: reg 0x10: [io  0xcc00-0xcc07]
[    0.270485] pci 0000:03:00.1: reg 0x14: [io  0xc880-0xc883]
[    0.270494] pci 0000:03:00.1: reg 0x18: [io  0xc800-0xc807]
[    0.270504] pci 0000:03:00.1: reg 0x1c: [io  0xc480-0xc483]
[    0.270513] pci 0000:03:00.1: reg 0x20: [io  0xc400-0xc40f]
[    0.270616] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.270835] pci 0000:00:1c.4: PCI bridge to [bus 03]
[    0.270960] pci 0000:00:1c.4:   bridge window [io  0xc000-0xcfff]
[    0.270963] pci 0000:00:1c.4:   bridge window [mem 0xf9f00000-0xf9ffffff]
[    0.271023] pci 0000:02:00.0: [11ab:4364] type 00 class 0x020000
[    0.271074] pci 0000:02:00.0: reg 0x10: [mem 0xf9efc000-0xf9efffff 64bit]
[    0.271085] pci 0000:02:00.0: reg 0x18: [io  0xb800-0xb8ff]
[    0.271124] pci 0000:02:00.0: reg 0x30: [mem 0xf9ec0000-0xf9edffff pref]
[    0.271168] pci 0000:02:00.0: supports D1 D2
[    0.271170] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.290017] pci 0000:00:1c.5: PCI bridge to [bus 02]
[    0.290145] pci 0000:00:1c.5:   bridge window [io  0xb000-0xbfff]
[    0.290149] pci 0000:00:1c.5:   bridge window [mem 0xf9e00000-0xf9efffff]
[    0.290206] pci 0000:05:03.0: [104c:8023] type 00 class 0x0c0010
[    0.290227] pci 0000:05:03.0: reg 0x10: [mem 0xfbfff800-0xfbffffff]
[    0.290236] pci 0000:05:03.0: reg 0x14: [mem 0xfbff8000-0xfbffbfff]
[    0.290294] pci 0000:05:03.0: supports D1 D2
[    0.290296] pci 0000:05:03.0: PME# supported from D0 D1 D2 D3hot
[    0.290344] pci 0000:05:04.0: [11ab:4320] type 00 class 0x020000
[    0.290368] pci 0000:05:04.0: reg 0x10: [mem 0xfbff4000-0xfbff7fff]
[    0.290377] pci 0000:05:04.0: reg 0x14: [io  0xe800-0xe8ff]
[    0.290414] pci 0000:05:04.0: reg 0x30: [mem 0xfbfc0000-0xfbfdffff pref]
[    0.290438] pci 0000:05:04.0: supports D1 D2
[    0.290439] pci 0000:05:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.290507] pci 0000:00:1e.0: PCI bridge to [bus 05] (subtractive decode)
[    0.290633] pci 0000:00:1e.0:   bridge window [io  0xe000-0xefff]
[    0.290636] pci 0000:00:1e.0:   bridge window [mem 0xfbf00000-0xfbffffff]
[    0.290642] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
[    0.290644] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.290646] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    0.290649] pci 0000:00:1e.0:   bridge window [mem 0x000d0000-0x000dffff window] (subtractive decode)
[    0.290651] pci 0000:00:1e.0:   bridge window [mem 0xb0000000-0xffffffff window] (subtractive decode)
[    0.290670] pci_bus 0000:00: on NUMA node 0
[    0.291276] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.291835] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[    0.292391] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[    0.292948] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 *15)
[    0.293504] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.294212] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 *14 15)
[    0.294768] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 10 11 12 14 15)
[    0.295325] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[    0.295872] ACPI: Enabled 2 GPEs in block 00 to 1F
[    0.296106] vgaarb: setting as boot device: PCI:0000:01:00.0
[    0.296106] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.296106] vgaarb: device added: PCI:0000:04:00.0,decodes=io+mem,owns=none,locks=none
[    0.296106] vgaarb: loaded
[    0.296106] vgaarb: bridge control possible 0000:04:00.0
[    0.296106] vgaarb: bridge control possible 0000:01:00.0
[    0.296106] SCSI subsystem initialized
[    0.296106] libata version 3.00 loaded.
[    0.296106] ACPI: bus type USB registered
[    0.296106] usbcore: registered new interface driver usbfs
[    0.296106] usbcore: registered new interface driver hub
[    0.296106] usbcore: registered new device driver usb
[    0.296106] PCI: Using ACPI for IRQ routing
[    0.296106] PCI: pci_cache_line_size set to 64 bytes
[    0.296106] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    0.296106] e820: reserve RAM buffer [mem 0xaff90000-0xafffffff]
[    0.296106] NetLabel: Initializing
[    0.296106] NetLabel:  domain hash size = 128
[    0.296106] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.296106] NetLabel:  unlabeled traffic allowed by default
[    0.296106] clocksource: Switched to clocksource refined-jiffies
[    0.310101] pnp: PnP ACPI init
[    0.310347] system 00:00: [mem 0xfed14000-0xfed19fff] has been reserved
[    0.310473] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.310556] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.310786] pnp 00:02: [dma 0 disabled]
[    0.310843] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.311011] system 00:03: [io  0x0290-0x0297] has been reserved
[    0.311136] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.311299] system 00:04: [io  0x04d0-0x04d1] has been reserved
[    0.311423] system 00:04: [io  0x0800-0x087f] could not be reserved
[    0.311547] system 00:04: [io  0x0480-0x04bf] has been reserved
[    0.311671] system 00:04: [mem 0xffafe000-0xffb0cbff] could not be reserved
[    0.311796] system 00:04: [mem 0xffb00000-0xffbfffff] has been reserved
[    0.311919] system 00:04: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.312043] system 00:04: [mem 0xfed20000-0xfed8ffff] has been reserved
[    0.312167] system 00:04: [mem 0xfff00000-0xfffffffe] has been reserved
[    0.312291] system 00:04: [mem 0xfebfe000-0xfebfec00] has been reserved
[    0.312415] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.312530] system 00:05: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.312655] system 00:05: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.312780] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.312880] system 00:06: [mem 0xe0000000-0xefffffff] has been reserved
[    0.313005] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.313193] system 00:07: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.313318] system 00:07: [mem 0x000c0000-0x000cffff] could not be reserved
[    0.313442] system 00:07: [mem 0x000e0000-0x000fffff] could not be reserved
[    0.313565] system 00:07: [mem 0x00100000-0xafffffff] could not be reserved
[    0.313689] system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.313819] pnp: PnP ACPI: found 8 devices
[    0.351141] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.351378] clocksource: Switched to clocksource acpi_pm
[    0.351530] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 add_align 100000
[    0.351537] pci 0000:00:1c.5: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000
[    0.351547] pci 0000:00:1f.0: BAR 13: [io  size 0x0080] has bogus alignment
[    0.351672] pci 0000:00:1c.4: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.351675] pci 0000:00:1c.4: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.351678] pci 0000:00:1c.5: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.351680] pci 0000:00:1c.5: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.351687] pci 0000:00:1c.4: BAR 15: assigned [mem 0xf0000000-0xf01fffff 64bit pref]
[    0.351900] pci 0000:00:1c.5: BAR 15: assigned [mem 0xf0200000-0xf03fffff 64bit pref]
[    0.352111] pci 0000:00:1f.3: BAR 0: assigned [mem 0xf0400000-0xf04000ff]
[    0.352237] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.352361] pci 0000:00:01.0:   bridge window [io  0xa000-0xafff]
[    0.352485] pci 0000:00:01.0:   bridge window [mem 0xf8000000-0xf9dfffff]
[    0.352610] pci 0000:00:01.0:   bridge window [mem 0xb0000000-0xcdffffff 64bit pref]
[    0.352823] pci 0000:00:1c.0: PCI bridge to [bus 04]
[    0.352950] pci 0000:00:1c.0:   bridge window [io  0xd000-0xdfff]
[    0.353075] pci 0000:00:1c.0:   bridge window [mem 0xfa000000-0xfbefffff]
[    0.353200] pci 0000:00:1c.0:   bridge window [mem 0xce000000-0xdfffffff 64bit pref]
[    0.353413] pci 0000:00:1c.4: PCI bridge to [bus 03]
[    0.353536] pci 0000:00:1c.4:   bridge window [io  0xc000-0xcfff]
[    0.353661] pci 0000:00:1c.4:   bridge window [mem 0xf9f00000-0xf9ffffff]
[    0.353785] pci 0000:00:1c.4:   bridge window [mem 0xf0000000-0xf01fffff 64bit pref]
[    0.353999] pci 0000:00:1c.5: PCI bridge to [bus 02]
[    0.354123] pci 0000:00:1c.5:   bridge window [io  0xb000-0xbfff]
[    0.354248] pci 0000:00:1c.5:   bridge window [mem 0xf9e00000-0xf9efffff]
[    0.354373] pci 0000:00:1c.5:   bridge window [mem 0xf0200000-0xf03fffff 64bit pref]
[    0.354588] pci 0000:00:1e.0: PCI bridge to [bus 05]
[    0.354711] pci 0000:00:1e.0:   bridge window [io  0xe000-0xefff]
[    0.354836] pci 0000:00:1e.0:   bridge window [mem 0xfbf00000-0xfbffffff]
[    0.354965] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.354967] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.354969] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.354971] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window]
[    0.354973] pci_bus 0000:00: resource 8 [mem 0xb0000000-0xffffffff window]
[    0.354975] pci_bus 0000:01: resource 0 [io  0xa000-0xafff]
[    0.354977] pci_bus 0000:01: resource 1 [mem 0xf8000000-0xf9dfffff]
[    0.354979] pci_bus 0000:01: resource 2 [mem 0xb0000000-0xcdffffff 64bit pref]
[    0.354982] pci_bus 0000:04: resource 0 [io  0xd000-0xdfff]
[    0.354984] pci_bus 0000:04: resource 1 [mem 0xfa000000-0xfbefffff]
[    0.354986] pci_bus 0000:04: resource 2 [mem 0xce000000-0xdfffffff 64bit pref]
[    0.354988] pci_bus 0000:03: resource 0 [io  0xc000-0xcfff]
[    0.354990] pci_bus 0000:03: resource 1 [mem 0xf9f00000-0xf9ffffff]
[    0.354992] pci_bus 0000:03: resource 2 [mem 0xf0000000-0xf01fffff 64bit pref]
[    0.354994] pci_bus 0000:02: resource 0 [io  0xb000-0xbfff]
[    0.354996] pci_bus 0000:02: resource 1 [mem 0xf9e00000-0xf9efffff]
[    0.354998] pci_bus 0000:02: resource 2 [mem 0xf0200000-0xf03fffff 64bit pref]
[    0.355000] pci_bus 0000:05: resource 0 [io  0xe000-0xefff]
[    0.355002] pci_bus 0000:05: resource 1 [mem 0xfbf00000-0xfbffffff]
[    0.355004] pci_bus 0000:05: resource 4 [io  0x0000-0x0cf7 window]
[    0.355006] pci_bus 0000:05: resource 5 [io  0x0d00-0xffff window]
[    0.355008] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.355010] pci_bus 0000:05: resource 7 [mem 0x000d0000-0x000dffff window]
[    0.355012] pci_bus 0000:05: resource 8 [mem 0xb0000000-0xffffffff window]
[    0.355105] NET: Registered protocol family 2
[    0.355485] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[    0.355649] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    0.355821] TCP: Hash tables configured (established 8192 bind 8192)
[    0.355985] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.356123] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.356360] NET: Registered protocol family 1
[    0.356653] pci 0000:01:00.0: Video device with shadowed ROM
[    0.356679] pci 0000:03:00.0: async suspend disabled to avoid multi-function power-on ordering issue
[    0.356893] pci 0000:03:00.1: async suspend disabled to avoid multi-function power-on ordering issue
[    0.357112] PCI: CLS 32 bytes, default 64
[    0.357540] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.357745] audit: initializing netlink subsys (disabled)
[    0.357881] audit: type=2000 audit(1473843918.350:1): initialized
[    0.358179] Initialise system trusted keyring
[    0.358338] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    0.358338] VFS: Disk quotas dquot_6.6.0
[    0.358338] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.358338] SELinux:  Registering netfilter hooks
[    0.359051] Key type asymmetric registered
[    0.359175] Asymmetric key parser 'x509' registered
[    0.359314] bounce: pool size: 64 pages
[    0.359467] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[    0.359762] io scheduler noop registered
[    0.359885] io scheduler deadline registered
[    0.360047] io scheduler cfq registered (default)
[    0.361109] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.381721] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    0.382411] Linux agpgart interface v0.103
[    0.382664] intel_idle: does not run on family 6 model 23
[    0.382674] ipmi message handler version 39.2
[    0.382809] IPMI System Interface driver.
[    0.382956] ipmi_si: Unable to find any System Interface(s)
[    0.383574] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    0.383787] ACPI: Power Button [PWRB]
[    0.383952] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.384164] ACPI: Power Button [PWRF]
[    0.384562] GHES: HEST is not enabled!
[    0.388304] brd: module loaded
[    0.390462] loop: module loaded
[    0.390699] ahci 0000:03:00.0: version 3.0
[    0.410053] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[    0.410281] ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part
[    0.410778] scsi host0: ahci
[    0.411067] scsi host1: ahci
[    0.411256] ata1: SATA max UDMA/133 abar m8192@0xf9ffe000 port 0xf9ffe100 irq 16
[    0.411469] ata2: SATA max UDMA/133 abar m8192@0xf9ffe000 port 0xf9ffe180 irq 16
[    0.411812] ata_piix 0000:00:1f.2: version 2.13
[    0.411823] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[    0.413497] scsi host2: ata_piix
[    0.413750] scsi host3: ata_piix
[    0.413925] ata3: SATA max UDMA/133 cmd 0x8400 ctl 0x8080 bmdma 0x7880 irq 19
[    0.414051] ata4: SATA max UDMA/133 cmd 0x8000 ctl 0x7c00 bmdma 0x7888 irq 19
[    0.414258] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[    0.415386] scsi host4: ata_piix
[    0.415694] scsi host5: ata_piix
[    0.415868] ata5: SATA max UDMA/133 cmd 0x9080 ctl 0x9000 bmdma 0x8800 irq 19
[    0.415992] ata6: SATA max UDMA/133 cmd 0x8c00 ctl 0x8880 bmdma 0x8808 irq 19
[    0.416229] pata_jmicron 0000:03:00.1: enabling device (0000 -> 0001)
[    0.417148] scsi host6: pata_jmicron
[    0.417449] scsi host7: pata_jmicron
[    0.419722] ata7: PATA max UDMA/100 cmd 0xcc00 ctl 0xc880 bmdma 0xc400 irq 17
[    0.419845] ata8: PATA max UDMA/100 cmd 0xc800 ctl 0xc480 bmdma 0xc408 irq 17
[    0.420205] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.420338] ehci-pci: EHCI PCI platform driver
[    0.420567] ehci-pci 0000:00:1a.7: EHCI Host Controller
[    0.420734] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
[    0.420954] ehci-pci 0000:00:1a.7: debug port 1
[    0.424980] ehci-pci 0000:00:1a.7: cache line size of 32 is not supported
[    0.424990] ehci-pci 0000:00:1a.7: irq 18, io mem 0xf7fffc00
[    0.440021] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[    0.440201] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.440325] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.440536] usb usb1: Product: EHCI Host Controller
[    0.440658] usb usb1: Manufacturer: Linux 4.4.6-gentoo ehci_hcd
[    0.440782] usb usb1: SerialNumber: 0000:00:1a.7
[    0.441023] hub 1-0:1.0: USB hub found
[    0.441151] hub 1-0:1.0: 4 ports detected
[    0.441503] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    0.441672] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
[    0.441890] ehci-pci 0000:00:1d.7: debug port 1
[    0.445915] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
[    0.445926] ehci-pci 0000:00:1d.7: irq 23, io mem 0xf7fff800
[    0.460032] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.460212] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    0.460337] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.460547] usb usb2: Product: EHCI Host Controller
[    0.460669] usb usb2: Manufacturer: Linux 4.4.6-gentoo ehci_hcd
[    0.460792] usb usb2: SerialNumber: 0000:00:1d.7
[    0.461018] hub 2-0:1.0: USB hub found
[    0.461146] hub 2-0:1.0: 6 ports detected
[    0.461419] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.461546] ohci-pci: OHCI PCI platform driver
[    0.461682] uhci_hcd: USB Universal Host Controller Interface driver
[    0.461882] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    0.462048] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[    0.462263] uhci_hcd 0000:00:1a.0: detected 2 ports
[    0.462401] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00009880
[    0.462568] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    0.462693] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.462904] usb usb3: Product: UHCI Host Controller
[    0.463026] usb usb3: Manufacturer: Linux 4.4.6-gentoo uhci_hcd
[    0.463149] usb usb3: SerialNumber: 0000:00:1a.0
[    0.463372] hub 3-0:1.0: USB hub found
[    0.463498] hub 3-0:1.0: 2 ports detected
[    0.463779] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    0.463947] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[    0.464162] uhci_hcd 0000:00:1a.1: detected 2 ports
[    0.464299] uhci_hcd 0000:00:1a.1: irq 17, io base 0x00009c00
[    0.464463] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    0.464587] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.464796] usb usb4: Product: UHCI Host Controller
[    0.464918] usb usb4: Manufacturer: Linux 4.4.6-gentoo uhci_hcd
[    0.465041] usb usb4: SerialNumber: 0000:00:1a.1
[    0.465264] hub 4-0:1.0: USB hub found
[    0.465391] hub 4-0:1.0: 2 ports detected
[    0.465670] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.465838] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[    0.466053] uhci_hcd 0000:00:1d.0: detected 2 ports
[    0.466190] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00009400
[    0.466353] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    0.466477] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.466688] usb usb5: Product: UHCI Host Controller
[    0.466811] usb usb5: Manufacturer: Linux 4.4.6-gentoo uhci_hcd
[    0.466934] usb usb5: SerialNumber: 0000:00:1d.0
[    0.467154] hub 5-0:1.0: USB hub found
[    0.467281] hub 5-0:1.0: 2 ports detected
[    0.467557] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.467723] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[    0.467937] uhci_hcd 0000:00:1d.1: detected 2 ports
[    0.468074] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00009480
[    0.468239] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[    0.468363] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.468573] usb usb6: Product: UHCI Host Controller
[    0.468695] usb usb6: Manufacturer: Linux 4.4.6-gentoo uhci_hcd
[    0.468817] usb usb6: SerialNumber: 0000:00:1d.1
[    0.469040] hub 6-0:1.0: USB hub found
[    0.469167] hub 6-0:1.0: 2 ports detected
[    0.469445] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.469610] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[    0.469826] uhci_hcd 0000:00:1d.2: detected 2 ports
[    0.469963] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00009800
[    0.470157] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[    0.470281] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.470492] usb usb7: Product: UHCI Host Controller
[    0.470615] usb usb7: Manufacturer: Linux 4.4.6-gentoo uhci_hcd
[    0.470738] usb usb7: SerialNumber: 0000:00:1d.2
[    0.470959] hub 7-0:1.0: USB hub found
[    0.471086] hub 7-0:1.0: 2 ports detected
[    0.471346] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    0.474297] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.474423] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.474649] mousedev: PS/2 mouse device common for all mice
[    0.474972] rtc_cmos 00:01: RTC can wake from S4
[    0.475216] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[    0.475357] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram
[    0.475507] platform eisa.0: Probing EISA bus 0
[    0.475631] platform eisa.0: EISA: Cannot allocate resource for mainboard
[    0.475786] hidraw: raw HID events driver (C) Jiri Kosina
[    0.476033] usbcore: registered new interface driver usbhid
[    0.476156] usbhid: USB HID core driver
[    0.476312] drop_monitor: Initializing network drop monitor service
[    0.476533] Initializing XFRM netlink socket
[    0.476761] NET: Registered protocol family 10
[    0.477171] NET: Registered protocol family 17
[    0.477533] Using IPI No-Shortcut mode
[    0.477815] registered taskstats version 1
[    0.477949] Loading compiled-in X.509 certificates
[    0.481421] Loaded X.509 cert 'Build time autogenerated kernel key: c7f32cf5e3974ba1fdd89ee5a02dbab43d526562'
[    0.481652] ima: No TPM chip found, activating TPM-bypass!
[    0.482276] rtc_cmos 00:01: setting system clock to 2016-09-14 09:05:19 UTC (1473843919)
[    0.760064] ata2: SATA link down (SStatus 0 SControl 300)
[    0.760238] ata1: SATA link down (SStatus 0 SControl 300)
[    0.770884] ata6: SATA link down (SStatus 0 SControl 300)
[    0.920057] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    0.940258] ata5.00: ATA-9: WDC WD30EFRX-68EUZN0, 82.00A82, max UDMA/133
[    0.940385] ata5.00: 5860533168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    0.960253] ata5.00: configured for UDMA/133
[    1.270073] ata4.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.270207] ata4.01: SATA link down (SStatus 0 SControl 300)
[    1.270439] ata3.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.270572] ata3.01: SATA link down (SStatus 0 SControl 300)
[    1.271048] ata4.00: ATA-9: WDC WD30EFRX-68EUZN0, 82.00A82, max UDMA/133
[    1.271176] ata4.00: 5860533168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    1.290390] ata4.00: configured for UDMA/133
[    1.290524] ata3.00: ATA-8: WDC WD5000AAKS-00V1A0, 05.01D05, max UDMA/133
[    1.290654] ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    1.330276] ata3.00: configured for UDMA/133
[    1.330610] scsi 2:0:0:0: Direct-Access     ATA      WDC WD5000AAKS-0 1D05 PQ: 0 ANSI: 5
[    1.331097] sd 2:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[    1.331436] sd 2:0:0:0: [sda] Write Protect is off
[    1.331475] scsi 3:0:0:0: Direct-Access     ATA      WDC WD30EFRX-68E 0A82 PQ: 0 ANSI: 5
[    1.331683] sd 3:0:0:0: [sdb] 5860533168 512-byte logical blocks: (3.00 TB/2.73 TiB)
[    1.331685] sd 3:0:0:0: [sdb] 4096-byte physical blocks
[    1.331806] sd 3:0:0:0: [sdb] Write Protect is off
[    1.331809] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    1.331852] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.331900] scsi 4:0:0:0: Direct-Access     ATA      WDC WD30EFRX-68E 0A82 PQ: 0 ANSI: 5
[    1.332186] sd 4:0:0:0: [sdc] 5860533168 512-byte logical blocks: (3.00 TB/2.73 TiB)
[    1.332188] sd 4:0:0:0: [sdc] 4096-byte physical blocks
[    1.332257] sd 4:0:0:0: [sdc] Write Protect is off
[    1.332260] sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[    1.332289] sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.333554] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.333604] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.340030] tsc: Refined TSC clocksource calibration: 2666.666 MHz
[    1.340162] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x26703cd6786, max_idle_ns: 440795256025 ns
[    1.378483]  sdc: sdc1
[    1.378952] sd 4:0:0:0: [sdc] Attached SCSI disk
[    1.384766]  sdb: sdb1
[    1.385185] sd 3:0:0:0: [sdb] Attached SCSI disk
[    1.391731]  sda: sda1 sda2 < sda5 sda6 >
[    1.392301] sd 2:0:0:0: [sda] Attached SCSI disk
[    1.501493] md: Waiting for all devices to be available before autodetect
[    1.501619] md: If you don't use raid, use raid=noautodetect
[    1.502015] md: Autodetecting RAID arrays.
[    1.502140] md: Scanned 0 and added 0 devices.
[    1.502263] md: autorun ...
[    1.502385] md: ... autorun DONE.
[    1.525873] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[    1.528222] VFS: Mounted root (ext4 filesystem) readonly on device 8:6.
[    1.564597] devtmpfs: mounted
[    1.565008] Freeing unused kernel memory: 696K (c18bd000 - c196b000)
[    1.565203] Write protecting the kernel text: 5892k
[    1.565367] Write protecting the kernel read-only data: 2384k
[    2.340092] clocksource: Switched to clocksource tsc
[    4.268283] udevd[377]: starting version 3.1.5
[    4.438776] random: udevd urandom read with 81 bits of entropy available
[    5.515441] skge: 1.14 addr 0xfbff4000 irq 19 chip Yukon-Lite rev 9
[    5.515668] skge 0000:05:04.0 eth0: addr 00:18:f3:fe:1d:71
[    5.525828] sky2: driver version 1.30
[    5.525926] sky2 0000:02:00.0: Yukon-2 EC Ultra chip revision 2
[    5.526271] sky2 0000:02:00.0 eth1: addr 00:18:f3:fe:2d:0b
[    5.595520] i801_smbus 0000:00:1f.3: enabling device (0001 -> 0003)
[    5.595528] ACPI Warning: SystemIO range 0x0000000000000400-0x000000000000041F conflicts with OpRegion 0x0000000000000400-0x000000000000040F (\SMRG) (20150930/utaddress-254)
[    5.595534] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    5.781820] input: PC Speaker as /devices/platform/pcspkr/input/input5
[    5.830066] firewire_ohci 0000:05:03.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2
[    5.842781] random: nonblocking pool is initialized
[    5.845540] md: bind<sdc1>
[    5.846885] md: bind<sdb1>
[    5.880346] md: raid1 personality registered for level 1
[    5.880649] md/raid1:md127: not clean -- starting background reconstruction
[    5.880653] md/raid1:md127: active with 2 out of 2 mirrors
[    5.880778] created bitmap (22 pages) for device md127
[    5.884619] md127: bitmap initialized from disk: read 2 pages, set 40374 of 44711 bits
[    5.911794] md127: detected capacity change from 0 to 3000457232384
[    6.032901] iTCO_vendor_support: vendor-support=0
[    6.187887] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[    6.187924] iTCO_wdt: Found a ICH8 or ICH8R TCO device (Version=2, TCOBASE=0x0860)
[    6.188064] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    6.330150] firewire_core 0000:05:03.0: created device fw0: GUID 0011d8000109dabf, S400
[    6.561007] Error: Driver 'pcspkr' is already registered, aborting...
[    6.661176] snd_hda_intel 0000:01:00.1: Disabling MSI
[    6.661283] snd_hda_intel 0000:04:00.1: Disabling MSI
[    6.710326] [drm] Initialized drm 1.1.0 20060810
[    6.999905] nvidia: module license 'NVIDIA' taints kernel.
[    6.999906] nvidia: module license 'NVIDIA' taints kernel.
[    6.999910] Disabling lock debugging due to kernel taint
[    7.035848] nvidia: module verification failed: signature and/or required key missing - tainting kernel
[    7.043522] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[    7.043740] nvidia 0000:04:00.0: enabling device (0000 -> 0003)
[    7.043756] vgaarb: device changed decodes: PCI:0000:04:00.0,olddecodes=io+mem,decodes=none:owns=none
[    7.043959] nvidia-nvlink: Nvlink Core is being initialized, major device number 247
[    7.043979] NVRM: loading NVIDIA UNIX x86 Kernel Module  370.28  Thu Sep  1 18:48:42 PDT 2016
[    7.179801] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms  370.28  Thu Sep  1 19:01:23 PDT 2016
[    7.196530] [drm] [nvidia-drm] [GPU ID 0x00000100] Loading driver
[    7.196626] [drm] [nvidia-drm] [GPU ID 0x00000400] Loading driver
[    7.220205] snd_hda_codec_analog hdaudioC0D0: autoconfig for AD1988B: line_outs=4 (0x12/0x16/0x24/0x25/0x0) type:line
[    7.220210] snd_hda_codec_analog hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    7.220212] snd_hda_codec_analog hdaudioC0D0:    hp_outs=1 (0x11/0x0/0x0/0x0/0x0)
[    7.220214] snd_hda_codec_analog hdaudioC0D0:    mono: mono_out=0x0
[    7.220216] snd_hda_codec_analog hdaudioC0D0:    dig-out=0x1b/0x0
[    7.220218] snd_hda_codec_analog hdaudioC0D0:    inputs:
[    7.220220] snd_hda_codec_analog hdaudioC0D0:      Front Mic=0x14
[    7.220222] snd_hda_codec_analog hdaudioC0D0:      Rear Mic=0x17
[    7.220224] snd_hda_codec_analog hdaudioC0D0:      Line=0x15
[    7.220226] snd_hda_codec_analog hdaudioC0D0:      Line=0x1a
[    7.220228] snd_hda_codec_analog hdaudioC0D0:      CD=0x18
[    7.234550] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[    7.235484] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[    7.235569] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[    7.235657] input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[    7.235739] input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[    7.235826] input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[    7.235918] input: HDA Intel Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[    8.500042] floppy0: no floppy controllers found
[    8.864017] vmap allocation for size 16781312 failed: use vmalloc=<size> to increase size.
[    8.867601] NVRM: RmInitAdapter failed! (0x25:0xffff:1050)
[    8.867632] NVRM: rm_init_adapter failed for device bearing minor number 1
[    8.950933] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input17
[    8.951283] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1c.0/0000:04:00.1/sound/card2/input13
[    8.951349] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input18
[    8.951448] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input19
[    8.951543] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input20
[    8.951699] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1c.0/0000:04:00.1/sound/card2/input14
[    8.951803] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1c.0/0000:04:00.1/sound/card2/input15
[    8.951927] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1c.0/0000:04:00.1/sound/card2/input16
[   11.643522] EXT4-fs (sda6): re-mounted. Opts: (null)
[   12.586177] Adding 8388604k swap on /dev/sda5.  Priority:-1 extents:1 across:8388604k
[   16.885380] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   16.885453] skge 0000:05:04.0 eth0: enabling interface
[   16.888630] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   16.901446] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[   16.904480] sky2 0000:02:00.0 eth1: enabling interface
[   16.904555] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[   19.292679] skge 0000:05:04.0 eth0: Link is up at 1000 Mbps, full duplex, flow control none
[   19.292699] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   19.781146] vmap allocation for size 16781312 failed: use vmalloc=<size> to increase size.
[   19.784857] NVRM: RmInitAdapter failed! (0x25:0xffff:1050)
[   19.784884] NVRM: rm_init_adapter failed for device bearing minor number 1
[   19.790828] NVRM: Persistence mode is deprecated and will be removed in a future release. Please use nvidia-persistenced instead.


RE: second 1070 not seen (linux) - atom - 09-14-2016

clinfo output please

RE: second 1070 not seen (linux) - bastibasti - 09-15-2016

That tool is not existing on the machine ;-)

-> However the vmalloc kernel setting to 256M solved the issue.

I guess I have to go 64 bits from now (and buy a bigger power supply)