[SOLVED] xdm setup problem with server videocard - Printable Version +- hashcat Forum (https://hashcat.net/forum) +-- Forum: Support (https://hashcat.net/forum/forum-3.html) +--- Forum: hashcat (https://hashcat.net/forum/forum-45.html) +--- Thread: [SOLVED] xdm setup problem with server videocard (/thread-6444.html) |
[SOLVED] xdm setup problem with server videocard - hashdawg - 03-29-2017 Hi. I've been using just fine my current xorg setup with xdm environment on my old hardware. It worked just fine. But recently I've upgraded to the newer server-grade hardware. I had to switch in BIOS GPU to the built-in one (Aspeed AST2400) otherwise IPMI doesn't work remotely (blank screen). Xorg stopped working saying there are no suitable screens and with messages like: Code: 38380.867] (WW) xf86OpenConsole: setpgid failed: Operation not permitted I think it's because video signal is now going through the internal Aspeed AST2400 card. So I've edited my /etc/X11/xorg.conf to this: Code: Section "Device" xdm now works fine and starts, but now nvidia-settings stopped working: Code: sudo nvidia-settings -q gpus I'm wondering if there is any solution except switching back in BIOS video output back to external card and thus losing IPMI access to the server. NOTE: I've also installed latest Nvidia driver from their website: 375.39, but it happened as well with older version 370.28. Thank you. RE: xdm setup problem with server videocard - hashdawg - 03-29-2017 After trying different options it seems I need to use config like this: Code: Section "ServerLayout" Weirdly, though starting xdm now through systemctl doesn't work, but launching simple xdm or xinit via root works just fine from the console. I'll investigate later and report back for the full fix of this issue. EDIT: seems everything back to normal, I guess when you have multiple cards you need to specify BusID in the device section and also I've added DPMS setting in the monitor section. Thread can be closed. |