hashcat Forum
8-12% drop in speed in "Hashcat 3.5.0" (running wpa2) - Printable Version

+- hashcat Forum (https://hashcat.net/forum)
+-- Forum: Support (https://hashcat.net/forum/forum-3.html)
+--- Forum: hashcat (https://hashcat.net/forum/forum-45.html)
+--- Thread: 8-12% drop in speed in "Hashcat 3.5.0" (running wpa2) (/thread-6527.html)



8-12% drop in speed in "Hashcat 3.5.0" (running wpa2) - SmnFz - 05-04-2017

So i have been away for some time (6 months), and decided to get back on the saddle..I started by upgrade to windows10 pro 64

Something odd must have happend, because i noticed a major drop in speeds for WPA2 cracking on "hashcat 3.5.0" when i compare it to old "3.30"


If i compare the older 3.30 and the newer 3.5.0 it starts at the same speed, but after a minute the 3.5.0 verson drops the speed by 8-12%!! Both GPU is working @ 100% but seems to show inacurate numbers, (because the speeds is the same/almost the same in 3.10 3.20 and 3.30) Also when pushing the "s" button (status) hashcat seems a bit laggy and not as fast as it use to be

Is this happening because the new HCCAPx format? I thought it wasnt any difference in speeds between the new format and the old. Also i have heard that the 3.5.0 is basically old 3.30 with a lot of bugfixes, thats whats bothering me

Info about computer
Windows10 pro 64 bit 16gig ram
Intel "OpenCL Runtime for Intel Core and Intel Xeon Processors" (16.1.1)
AMD Radeon Software Crimson Edition 17.4.3 Driver for Windows® 10 64-bit
Afterburner v4.3.0

GPU
1# Radeon R9 380X Nitro 4GB
2# Radeon R9 380X Nitro 4GB
 
Both GPUs running 100% @ 70c celcius 

command used on new 3.5.0
hashcat64.exe -m 2500 1234 -a 3 -1 ?d ?1?1?1?1?1?1?1?1?1?1 -w 4

command used on old 3.30
hashcat64.exe -m 2500 1234.hccap -a 3 -1 ?d ?1?1?1?1?1?1?1?1?1?1 -w 4

I have screenshots that i can offer if needed


RE: 8-12% drop in speed in "Hashcat 3.5.0" (running wpa2) - atom - 05-07-2017

You can "reset to hccap" the way how hashcat is working by using --nonce-error-corrections=0


RE: 8-12% drop in speed in "Hashcat 3.5.0" (running wpa2) - SmnFz - 05-08-2017

(05-07-2017, 08:02 PM)atom Wrote: You can "reset to hccap" the way how hashcat is working by using --nonce-error-corrections=0

That made a lot of difference. Thanks


RE: 8-12% drop in speed in "Hashcat 3.5.0" (running wpa2) - atom - 05-13-2017

Then you maybe want to fix your handshake recording. Try out wlandump from https://github.com/ZerBea/hcxtools it's the way to go in 2017.