+- hashcat Forum (https://hashcat.net/forum)
+-- Forum: Misc (https://hashcat.net/forum/forum-15.html)
+--- Forum: Hardware (https://hashcat.net/forum/forum-13.html)
+--- Thread: gtx 1060 3gb version (/thread-7765.html)
gtx 1060 3gb version - Mdu830 - 08-25-2018
I'm looking into getting the gtx 1060 with 3gb of vram (single fan)
what i was wondering is:
Does it run with the most current version of hashcat (v4.2.1)?
Does it run well?
for example would i have to add --force to the command line?
And if anyone has one; could you give me a benchmark of it please?
i would like to use ubuntu 18.04 or 16.04 (18.04 preferred) with hashcat v4.2.1
RE: gtx 1060 3gb version - royce - 08-25-2018
All cards supported by current NVIDIA drivers will work with hashcat. You shouldn't have to use --force (at least, not at this writing. Someday you may have to. The 9xx, 10xx, and 20xx series should all be well supported.
I don't have a 1060 so I can't get you current (4.2.x) benchmarks for hashcat, but you can find some older ones around:
https://www.google.com/search?q=%22Gtx+1060%22+%22hashcat%22+%22benchmark+mode%22
RE: gtx 1060 3gb version - Mdu830 - 08-25-2018
Thank you for the quick reply!
would the difference in vram (3gb instead of 6gb) cause the amount of hash/s to be significantly less?
the specs of the 1060 (with 6gb of vram) are:
6GB 192-Bit GDDR5
Core Clock 1506 MHz
Boost Clock 1708 MHz
1280 CUDA Cores
and the specs of the 1060 (with 3gb of vram) are:
3GB 192-Bit GDDR5
Core Clock 1506 MHz
Boost Clock 1708 MHz
1152 CUDA Cores
or should i expect about the same results?
RE: gtx 1060 3gb version - royce - 08-25-2018
More VRAM is good for when you are trying large lists of hashes, or large combos of wordlists+rules, etc.
Note also that due to what I believe to be an error in NVIDIA's interpretation of the OpenCL spec:
https://devtalk.nvidia.com/default/topic/992502/why-is-cl_device_max_mem_alloc_size-never-larger-than-25-of-cl_device_global_mem_size-only-on-nvidia-/
... only 25% of that card's VRAM will be available for most attacks.
So I'd always go for more VRAM if you have the option.
RE: gtx 1060 3gb version - Mdu830 - 08-27-2018
the over all concern with the vram is; my motherboard only has 32gb of ddr4 ram
The plan is to have about 10 of these gpus totalling at 30gb vram
From what i’ve been told you need to have the total vram less than or equil to the ram on the motherboard for hashcat to run correctly
So even tho im only using 25% of the vram per card would the sum of the 10 cards vram compensate when using wordlists+rules etc?
RE: gtx 1060 3gb version - royce - 08-27-2018
I think that should be fine - it's not a hard requirement. You're close enough to it to be OK.
RE: gtx 1060 3gb version - Mdu830 - 08-27-2018
Thank you for the help!