nVidia 1660 familly hashrates - Printable Version +- hashcat Forum (https://hashcat.net/forum) +-- Forum: Misc (https://hashcat.net/forum/forum-15.html) +--- Forum: Hardware (https://hashcat.net/forum/forum-13.html) +--- Thread: nVidia 1660 familly hashrates (/thread-8952.html) |
nVidia 1660 familly hashrates - powermi - 02-08-2020 Gonna buy a GPU for hashcat, and as I dont hash large dicts, I was considering a 1070 used or a 1660 new. Have anyone tried the 1660 already? wondering if the hashrates woul be better than a 1060 and closer to a 1070. thanks RE: nVidia 1660 familly hashrates - Flomac - 02-09-2020 Both 1660 are much stronger than the 1060. Depending on the hash mode the 1660Ti compares about equally to the normal 1070. The 1070 Ti though is again much stronger. RE: nVidia 1660 familly hashrates - powermi - 02-11-2020 Finally bought a 1660 Super, I think performance is close to the 1070.. and here are the benchmarks: BTW how could I solve de warning and use the CPU too? powermi@hasher:~$ hashcat -b -O -w 4 hashcat (v5.1.0-1181-gc34fcabb) starting in benchmark mode... * Device #3: CUDA SDK Toolkit installation NOT detected. CUDA SDK Toolkit installation required for proper device support and utilization Falling back to OpenCL Runtime OpenCL API (OpenCL 2.1 LINUX) - Platform #1 [Intel(R) Corporation] ================================================================== * Device #1: AMD FX(tm)-6300 Six-Core Processor, skipped OpenCL API (OpenCL 1.2 pocl 1.1 None+Asserts, LLVM 6.0.0, SPIR, SLEEF, DISTRO, POCL_DEBUG) - Platform #2 [The pocl project] =========================================================================================================================== * Device #2: pthread-AMD FX(tm)-6300 Six-Core Processor, skipped OpenCL API (OpenCL 1.2 CUDA 10.2.131) - Platform #3 [NVIDIA Corporation] ======================================================================== * Device #3: GeForce GTX 1660 SUPER, 1485/5942 MB allocatable, 22MCU Benchmark relevant options: =========================== * --optimized-kernel-enable * --workload-profile=4 Hashmode: 0 - MD5 Speed.#3.........: 18199.8 MH/s (162.16ms) @ Accel:128 Loops:1024 Thr:1024 Vec:1 Hashmode: 100 - SHA1 Speed.#3.........: 6548.8 MH/s (450.77ms) @ Accel:128 Loops:1024 Thr:1024 Vec:1 Hashmode: 1400 - SHA2-256 Speed.#3.........: 2718.2 MH/s (271.48ms) @ Accel:32 Loops:1024 Thr:1024 Vec:1 Hashmode: 1700 - SHA2-512 Speed.#3.........: 888.2 MH/s (415.43ms) @ Accel:16 Loops:1024 Thr:1024 Vec:1 Hashmode: 2500 - WPA-EAPOL-PBKDF2 (Iterations: 4095) Speed.#3.........: 307.2 kH/s (292.70ms) @ Accel:32 Loops:512 Thr:1024 Vec:1 Hashmode: 1000 - NTLM Speed.#3.........: 32479.1 MH/s (90.83ms) @ Accel:128 Loops:1024 Thr:1024 Vec:1 Hashmode: 3000 - LM Speed.#3.........: 17425.1 MH/s (84.60ms) @ Accel:1024 Loops:1024 Thr:64 Vec:1 Hashmode: 5500 - NetNTLMv1 / NetNTLMv1+ESS Speed.#3.........: 18600.1 MH/s (158.66ms) @ Accel:128 Loops:1024 Thr:1024 Vec:1 Hashmode: 5600 - NetNTLMv2 Speed.#3.........: 1386.3 MH/s (266.15ms) @ Accel:32 Loops:512 Thr:1024 Vec:1 Hashmode: 1500 - descrypt, DES (Unix), Traditional DES Speed.#3.........: 683.9 MH/s (269.69ms) @ Accel:8 Loops:1024 Thr:1024 Vec:1 Hashmode: 500 - md5crypt, MD5 (Unix), Cisco-IOS $1$ (MD5) (Iterations: 1000) Speed.#3.........: 8771.0 kH/s (319.46ms) @ Accel:128 Loops:1000 Thr:1024 Vec:1 Hashmode: 3200 - bcrypt $2*$, Blowfish (Unix) (Iterations: 32) Speed.#3.........: 12716 H/s (148.60ms) @ Accel:8 Loops:32 Thr:11 Vec:1 Hashmode: 1800 - sha512crypt $6$, SHA512 (Unix) (Iterations: 5000) Speed.#3.........: 136.0 kH/s (263.04ms) @ Accel:16 Loops:512 Thr:1024 Vec:1 Hashmode: 7500 - Kerberos 5, etype 23, AS-REQ Pre-Auth Speed.#3.........: 231.9 MH/s (397.82ms) @ Accel:512 Loops:128 Thr:64 Vec:1 Hashmode: 13100 - Kerberos 5, etype 23, TGS-REP Speed.#3.........: 231.3 MH/s (398.81ms) @ Accel:512 Loops:128 Thr:64 Vec:1 Hashmode: 15300 - DPAPI masterkey file v1 (Iterations: 23999) Speed.#3.........: 52522 H/s (292.54ms) @ Accel:16 Loops:1024 Thr:1024 Vec:1 Hashmode: 15900 - DPAPI masterkey file v2 (Iterations: 12899) Speed.#3.........: 31630 H/s (451.28ms) @ Accel:16 Loops:512 Thr:1024 Vec:1 Hashmode: 7100 - macOS v10.8+ (PBKDF2-SHA512) (Iterations: 1023) Speed.#3.........: 370.3 kH/s (473.09ms) @ Accel:128 Loops:63 Thr:1024 Vec:1 Hashmode: 11600 - 7-Zip (Iterations: 16384) Speed.#3.........: 268.3 kH/s (334.68ms) @ Accel:128 Loops:512 Thr:1024 Vec:1 Hashmode: 12500 - RAR3-hp (Iterations: 262144) Speed.#3.........: 35257 H/s (319.40ms) @ Accel:8 Loops:16384 Thr:1024 Vec:1 Hashmode: 13000 - RAR5 (Iterations: 32799) Speed.#3.........: 31515 H/s (356.85ms) @ Accel:16 Loops:1024 Thr:1024 Vec:1 Hashmode: 6211 - TrueCrypt RIPEMD160 + XTS 512 bit (Iterations: 1999) Speed.#3.........: 240.3 kH/s (347.99ms) @ Accel:16 Loops:512 Thr:1024 Vec:1 Hashmode: 13400 - KeePass 1 (AES/Twofish) and KeePass 2 (AES) (Iterations: 24569) Speed.#3.........: 19921 H/s (753.79ms) @ Accel:16 Loops:1024 Thr:1024 Vec:1 Hashmode: 6800 - LastPass + LastPass sniffed (Iterations: 499) Speed.#3.........: 2027.1 kH/s (278.06ms) @ Accel:128 Loops:124 Thr:1024 Vec:1 Hashmode: 11300 - Bitcoin/Litecoin wallet.dat (Iterations: 200459) Speed.#3.........: 3924 H/s (466.68ms) @ Accel:128 Loops:128 Thr:1024 Vec:1 RE: nVidia 1660 familly hashrates - undeath - 02-11-2020 To use your CPU simply enable it with -d 1 (or -d 1,3 for cpu+gpu) RE: nVidia 1660 familly hashrates - powermi - 02-11-2020 (02-11-2020, 06:38 PM)undeath Wrote: To use your CPU simply enable it with -d 1 (or -d 1,3 for cpu+gpu) Thanks. and what abaut the CUDA SDK? BTW I dont know why 2 CPUs are showed. Only have one. RE: nVidia 1660 familly hashrates - philsmd - 02-11-2020 you need to use -D 1,2 (capital D for --opencl-device-types) to enable both CPU and GPU (-d x is something else, it just selects already whitelisted/enabled devices). you have pocl installed and therefore the CPU is listed twice... you should uninstall pocl, because it's not working very well with OpenCL. the CUDA SDK needs to be installed from nvidia.com (https://developer.nvidia.com/cuda-downloads). Only latest/beta version (at the time of this writing) support the CUDA backend. If you install CUDA correctly, also your GPUs will be listed twice (you can select between the "aliases", i.e. between OpenCL vs CUDA devices). RE: ...more nVidia 1660 familly hashrates 2020 Ubuntu 20.4 - PetarI - 11-21-2020 Config: Ubuntu 20.4 / i7 7700k stock/ ASUS z270 Prime / Palit 1660 (non-Ti) 6Gb / 450.80.02 Driver / Cuda 11.0 Code: $ hashcat -b Seems to be 35-50% of a 3070 speed, which for the prices of 3070 is on par if not cheaper to use. Even without the "tuned" or exact driver. Cheers!!! |