+- hashcat Forum (https://hashcat.net/forum)
+-- Forum: Misc (https://hashcat.net/forum/forum-15.html)
+--- Forum: General Talk (https://hashcat.net/forum/forum-33.html)
+--- Thread: Where are RTX 3060 Benchmarks? (/thread-9971.html)
Where are RTX 3060 Benchmarks? - mad_hashcatter - 03-30-2021
Where are RTX 3060 Benchmarks? Can't seem to find them anywhere online.
On a separate note. It would be nice if the hashcat community did a table of benchmaeks for all graphics cards so one can see all this info in one place when making a decision of what card to purchase for hashcat in terms of value (performance/cost). TIA.
RE: Where are RTX 3060 Benchmarks? - mad_hashcatter - 04-15-2021
I finally got my greasy hands on an RTX 3060 (NOT the Ti version) without having to pay scalpers, but overclockers.co.uk still charges substantially higher than the MSRP. It cost £650 ($895)! This took me about a month of watching online stocks through various websites to finally get a hold of one. And to be honest I am rather disappointed as in some benchmarks it seems to do slightly worse than an RTX 2060, eg -m 11300 is a measly 5135 H/s vs 5302 H/s on RTX 2060
Does anyone know if this is because of the hash limiter enforced by Nvidia by any chance? This card has 3584 vs the RTX 2060's 1920 cores, it boggles the mind. Or am I doing something wrong? I honestly hope it's the latter.
The test was done in Ubuntu 20.04 i7-6700 with 16GB RAM and Nvidia driver version 460:
$hashcat -b -w 4
hashcat (v6.1.1-120-g15bf8b730) starting in benchmark mode...
clGetDeviceIDs(): CL_DEVICE_NOT_FOUND
clGetDeviceIDs(): CL_DEVICE_NOT_FOUND
Successfully initialized NVIDIA CUDA library.
Failed to initialize NVIDIA RTC library.
* Device #1: CUDA SDK Toolkit installation NOT detected or incorrectly installed.
CUDA SDK Toolkit installation required for proper device support and utilization
Falling back to OpenCL Runtime
* Device #1: WARNING! Kernel exec timeout is not disabled.
This may cause "CL_OUT_OF_RESOURCES" or related errors.
To disable the timeout, see: https://hashcat.net/q/timeoutpatch
OpenCL API (OpenCL 1.2 CUDA 11.2.153) - Platform #1 [NVIDIA Corporation]
========================================================================
* Device #1: GeForce RTX 3060, 11072/12050 MB (3012 MB allocatable), 28MCU
OpenCL API (OpenCL 1.1 Mesa 21.2.0-devel (git-376c878 2021-04-15 focal-oibaf-ppa)) - Platform #2 [Mesa]
=======================================================================================================
Benchmark relevant options:
===========================
* --workload-profile=4
Hashmode: 0 - MD5
Speed.#1.........: 10000.4 MH/s (187.59ms) @ Accel:64 Loops:1024 Thr:1024 Vec:1
Hashmode: 100 - SHA1
Speed.#1.........: 4909.0 MH/s (382.40ms) @ Accel:64 Loops:1024 Thr:1024 Vec:1
Hashmode: 1400 - SHA2-256
Speed.#1.........: 2237.4 MH/s (419.54ms) @ Accel:32 Loops:1024 Thr:1024 Vec:1
Hashmode: 1700 - SHA2-512
Speed.#1.........: 946.7 MH/s (247.96ms) @ Accel:32 Loops:256 Thr:1024 Vec:1
Hashmode: 22000 - WPA-PBKDF2-PMKID+EAPOL (Iterations: 4095)
Speed.#1.........: 398.8 kH/s (287.02ms) @ Accel:16 Loops:1024 Thr:1024 Vec:1
Hashmode: 1000 - NTLM
Speed.#1.........: 13858.5 MH/s (135.46ms) @ Accel:64 Loops:1024 Thr:1024 Vec:1
Hashmode: 3000 - LM
Speed.#1.........: 21180.3 MH/s (88.00ms) @ Accel:1024 Loops:1024 Thr:64 Vec:1
Hashmode: 5500 - NetNTLMv1 / NetNTLMv1+ESS
Speed.#1.........: 13257.2 MH/s (141.49ms) @ Accel:64 Loops:1024 Thr:1024 Vec:1
Hashmode: 5600 - NetNTLMv2
Speed.#1.........: 1438.4 MH/s (326.22ms) @ Accel:16 Loops:1024 Thr:1024 Vec:1
Hashmode: 1500 - descrypt, DES (Unix), Traditional DES
Speed.#1.........: 979.7 MH/s (479.41ms) @ Accel:256 Loops:1024 Thr:64 Vec:1
Hashmode: 500 - md5crypt, MD5 (Unix), Cisco-IOS $1$ (MD5) (Iterations: 1000)
Speed.#1.........: 898.3 kH/s (253.79ms) @ Accel:8 Loops:1000 Thr:1024 Vec:1
Hashmode: 3200 - bcrypt $2*$, Blowfish (Unix) (Iterations: 32)
Speed.#1.........: 31866 H/s (151.06ms) @ Accel:16 Loops:32 Thr:11 Vec:1
Hashmode: 1800 - sha512crypt $6$, SHA512 (Unix) (Iterations: 5000)
Speed.#1.........: 52080 H/s (438.54ms) @ Accel:4 Loops:1024 Thr:1024 Vec:1
Hashmode: 7500 - Kerberos 5, etype 23, AS-REQ Pre-Auth
Speed.#1.........: 463.4 MH/s (506.48ms) @ Accel:512 Loops:256 Thr:64 Vec:1
Hashmode: 13100 - Kerberos 5, etype 23, TGS-REP
Speed.#1.........: 449.6 MH/s (522.06ms) @ Accel:128 Loops:1024 Thr:64 Vec:1
Hashmode: 15300 - DPAPI masterkey file v1 (Iterations: 23999)
Speed.#1.........: 67393 H/s (290.16ms) @ Accel:16 Loops:1024 Thr:1024 Vec:1
Hashmode: 15900 - DPAPI masterkey file v2 (Iterations: 12899)
Speed.#1.........: 38093 H/s (477.24ms) @ Accel:16 Loops:512 Thr:1024 Vec:1
Hashmode: 7100 - macOS v10.8+ (PBKDF2-SHA512) (Iterations: 1023)
Speed.#1.........: 487.4 kH/s (415.56ms) @ Accel:64 Loops:127 Thr:1024 Vec:1
Hashmode: 11600 - 7-Zip (Iterations: 16384)
Speed.#1.........: 381.1 kH/s (300.41ms) @ Accel:64 Loops:1024 Thr:1024 Vec:1
Hashmode: 12500 - RAR3-hp (Iterations: 262144)
Speed.#1.........: 45607 H/s (314.16ms) @ Accel:64 Loops:16384 Thr:128 Vec:1
Hashmode: 13000 - RAR5 (Iterations: 32799)
Speed.#1.........: 42448 H/s (337.17ms) @ Accel:16 Loops:1024 Thr:1024 Vec:1
Hashmode: 6211 - TrueCrypt RIPEMD160 + XTS 512 bit (Iterations: 1999)
Speed.#1.........: 304.4 kH/s (348.49ms) @ Accel:8 Loops:1024 Thr:1024 Vec:1
Hashmode: 13400 - KeePass 1 (AES/Twofish) and KeePass 2 (AES) (Iterations: 24569)
Speed.#1.........: 49355 H/s (387.21ms) @ Accel:16 Loops:1024 Thr:1024 Vec:1
Hashmode: 6800 - LastPass + LastPass sniffed (Iterations: 499)
Speed.#1.........: 2704.0 kH/s (221.50ms) @ Accel:64 Loops:249 Thr:1024 Vec:1
Hashmode: 11300 - Bitcoin/Litecoin wallet.dat (Iterations: 200459)
Speed.#1.........: 5135 H/s (455.78ms) @ Accel:32 Loops:512 Thr:1024 Vec:1
Started: Thu Apr 15 14:31:40 2021
Stopped: Thu Apr 15 14:36:35 2021
RE: Where are RTX 3060 Benchmarks? - mad_hashcatter - 04-15-2021
The only other thing worth mentioning is that The motherboard is Asus Prime Z-270P with Gen 3 PCI-e, whereas the GPU is a PCI-e gen 4 card. So that could be the bottleneck. Is anyone able to confirm this? Unfortunately this is the only motherboard I have, so I can't do the benchmarks in gen 4.
RE: Where are RTX 3060 Benchmarks? - NoReply - 04-16-2021
It's kinda impossible that PCIe 3.0 x16 will be a a bottleneck in any scenario. In benchmarking it doesn't even matter at all, since the performance purely depends on the work, that is done on the GPU directly.
RE: Where are RTX 3060 Benchmarks? - mad_hashcatter - 04-23-2021
It seems that the hashrate is limited by the linux drivers too as Nvidia planned. Bechause for -m 11300, the hash rate starts at around 30,000 H/s then can go down to around 6,000 H/s depending on how big the wordlist is. So not a suitable graphics card for hashcat it would seem. Can anyone else with this card confirm this at all?
RE: Where are RTX 3060 Benchmarks? - @0zyman@ - 08-19-2021
The Hashcat OpenCL performance was looking good except for the RTX 3060 not providing much uplift in some of the benchmarks compared to the RTX 2060.
https://www.phoronix.com/scan.php?page=article&item=nvidia-rtx30-compute&num=2
RE: Where are RTX 3060 Benchmarks? - aspz - 12-17-2021
I know this is an old thread but I'd thought I'd post my own 3060 benchmark scores here. I see very similar numbers to you. Having said that, I sometimes get a problem where the GPU power and clock speed drops giving me benchmark scores less than 50% of what you see here. I might make a separate thread about that though if I can figure out what triggers it.
This is running Windows 11 and Nvidia drivers 30.0.14.9709 (497.09) and CUDA Toolkit 11.5.1_496
Code:
$ ./hashcat.exe -b
hashcat (v6.2.5) starting in benchmark mode
Benchmarking uses hand-optimized kernel code by default.
You can use it in your cracking session by setting the -O option.
Note: Using optimized kernel code limits the maximum supported password length.
To disable the optimized kernel code in benchmark mode, use the -w option.
* Device #1: WARNING! Kernel exec timeout is not disabled.
This may cause "CL_OUT_OF_RESOURCES" or related errors.
To disable the timeout, see: https://hashcat.net/q/timeoutpatch
* Device #2: WARNING! Kernel exec timeout is not disabled.
This may cause "CL_OUT_OF_RESOURCES" or related errors.
To disable the timeout, see: https://hashcat.net/q/timeoutpatch
CUDA API (CUDA 11.5)
====================
* Device #1: NVIDIA GeForce RTX 3060, 11282/12287 MB, 28MCU
OpenCL API (OpenCL 3.0 CUDA 11.5.121) - Platform #1 [NVIDIA Corporation]
========================================================================
* Device #2: NVIDIA GeForce RTX 3060, skipped
Benchmark relevant options:
===========================
* --optimized-kernel-enable
-------------------
* Hash-Mode 0 (MD5)
-------------------
Speed.#1.........: 25021.2 MH/s (74.45ms) @ Accel:256 Loops:1024 Thr:256 Vec:8
----------------------
* Hash-Mode 100 (SHA1)
----------------------
Speed.#1.........: 7810.5 MH/s (59.70ms) @ Accel:32 Loops:1024 Thr:512 Vec:1
---------------------------
* Hash-Mode 1400 (SHA2-256)
---------------------------
Speed.#1.........: 3388.7 MH/s (68.92ms) @ Accel:8 Loops:1024 Thr:1024 Vec:1
---------------------------
* Hash-Mode 1700 (SHA2-512)
---------------------------
Speed.#1.........: 1141.0 MH/s (51.15ms) @ Accel:4 Loops:1024 Thr:512 Vec:1
-------------------------------------------------------------
* Hash-Mode 22000 (WPA-PBKDF2-PMKID+EAPOL) [Iterations: 4095]
-------------------------------------------------------------
Speed.#1.........: 391.5 kH/s (71.38ms) @ Accel:8 Loops:1024 Thr:512 Vec:1
-----------------------
* Hash-Mode 1000 (NTLM)
-----------------------
Speed.#1.........: 45639.8 MH/s (40.61ms) @ Accel:256 Loops:1024 Thr:256 Vec:8
---------------------
* Hash-Mode 3000 (LM)
---------------------
Speed.#1.........: 23592.1 MH/s (39.37ms) @ Accel:128 Loops:1024 Thr:256 Vec:1
--------------------------------------------
* Hash-Mode 5500 (NetNTLMv1 / NetNTLMv1+ESS)
--------------------------------------------
Speed.#1.........: 24662.2 MH/s (75.30ms) @ Accel:512 Loops:512 Thr:256 Vec:2
----------------------------
* Hash-Mode 5600 (NetNTLMv2)
----------------------------
Speed.#1.........: 1793.4 MH/s (65.10ms) @ Accel:8 Loops:1024 Thr:512 Vec:1
--------------------------------------------------------
* Hash-Mode 1500 (descrypt, DES (Unix), Traditional DES)
--------------------------------------------------------
Speed.#1.........: 973.7 MH/s (59.86ms) @ Accel:8 Loops:1024 Thr:256 Vec:1
------------------------------------------------------------------------------
* Hash-Mode 500 (md5crypt, MD5 (Unix), Cisco-IOS $1$ (MD5)) [Iterations: 1000]
------------------------------------------------------------------------------
Speed.#1.........: 10126.5 kH/s (77.77ms) @ Accel:64 Loops:1000 Thr:512 Vec:1
----------------------------------------------------------------
* Hash-Mode 3200 (bcrypt $2*$, Blowfish (Unix)) [Iterations: 32]
----------------------------------------------------------------
Speed.#1.........: 35142 H/s (84.55ms) @ Accel:256 Loops:16 Thr:24 Vec:1
--------------------------------------------------------------------
* Hash-Mode 1800 (sha512crypt $6$, SHA512 (Unix)) [Iterations: 5000]
--------------------------------------------------------------------
Speed.#1.........: 181.1 kH/s (71.25ms) @ Accel:1024 Loops:512 Thr:128 Vec:1
--------------------------------------------------------
* Hash-Mode 7500 (Kerberos 5, etype 23, AS-REQ Pre-Auth)
--------------------------------------------------------
Speed.#1.........: 534.9 MH/s (54.52ms) @ Accel:256 Loops:128 Thr:32 Vec:1
-------------------------------------------------
* Hash-Mode 13100 (Kerberos 5, etype 23, TGS-REP)
-------------------------------------------------
Speed.#1.........: 531.9 MH/s (54.86ms) @ Accel:256 Loops:128 Thr:32 Vec:1
---------------------------------------------------------------
* Hash-Mode 15300 (DPAPI masterkey file v1) [Iterations: 23999]
---------------------------------------------------------------
Speed.#1.........: 67534 H/s (70.15ms) @ Accel:8 Loops:1024 Thr:512 Vec:1
---------------------------------------------------------------
* Hash-Mode 15900 (DPAPI masterkey file v2) [Iterations: 12899]
---------------------------------------------------------------
Speed.#1.........: 38972 H/s (55.43ms) @ Accel:2 Loops:1024 Thr:512 Vec:1
------------------------------------------------------------------
* Hash-Mode 7100 (macOS v10.8+ (PBKDF2-SHA512)) [Iterations: 1023]
------------------------------------------------------------------
Speed.#1.........: 472.0 kH/s (46.06ms) @ Accel:8 Loops:255 Thr:512 Vec:1
---------------------------------------------
* Hash-Mode 11600 (7-Zip) [Iterations: 16384]
---------------------------------------------
Speed.#1.........: 415.0 kH/s (65.92ms) @ Accel:32 Loops:4096 Thr:128 Vec:1
------------------------------------------------
* Hash-Mode 12500 (RAR3-hp) [Iterations: 262144]
------------------------------------------------
Speed.#1.........: 55859 H/s (63.27ms) @ Accel:8 Loops:16384 Thr:256 Vec:1
--------------------------------------------
* Hash-Mode 13000 (RAR5) [Iterations: 32799]
--------------------------------------------
Speed.#1.........: 42767 H/s (83.20ms) @ Accel:16 Loops:512 Thr:512 Vec:1
-----------------------------------------------------------------------
* Hash-Mode 6211 (TrueCrypt RIPEMD160 + XTS 512 bit) [Iterations: 1999]
-----------------------------------------------------------------------
Speed.#1.........: 297.7 kH/s (87.02ms) @ Accel:8 Loops:256 Thr:1024 Vec:1
-----------------------------------------------------------------------------------
* Hash-Mode 13400 (KeePass 1 (AES/Twofish) and KeePass 2 (AES)) [Iterations: 24569]
-----------------------------------------------------------------------------------
Speed.#1.........: 50067 H/s (95.00ms) @ Accel:32 Loops:512 Thr:256 Vec:1
----------------------------------------------------------------
* Hash-Mode 6800 (LastPass + LastPass sniffed) [Iterations: 499]
----------------------------------------------------------------
Speed.#1.........: 2525.9 kH/s (81.29ms) @ Accel:16 Loops:499 Thr:512 Vec:1
--------------------------------------------------------------------
* Hash-Mode 11300 (Bitcoin/Litecoin wallet.dat) [Iterations: 200459]
--------------------------------------------------------------------
Speed.#1.........: 5158 H/s (64.63ms) @ Accel:1024 Loops:512 Thr:128 Vec:1
Started: Fri Dec 17 17:31:54 2021
Stopped: Fri Dec 17 17:33:59 2021