dual 6970 trouble
#1
Bitmaps: 8 bits, 256 entries, 0x000000ff mask, 1024 bytes
GPU-Loops: 128
GPU-Accel: 160
Password lengths range: 1 - 15
Platform: AMD compatible platform found
Watchdog: Temperature limit set to 90c
Device #1: Cayman, 2048MB, 0Mhz, 24MCU
Device #2: Cayman, 2048MB, 0Mhz, 24MCU
Device #1: Allocating 577MB host-memory
Device #1: Kernel ./kernels/4098/m0000_a3.Cayman.64.kernel (511848 bytes)
Device #2: Allocating 577MB host-memory
Device #2: Kernel ./kernels/4098/m0000_a3.Cayman.64.kernel (511848 bytes)
Status.......: Running
Input.Mode...: Mask (?1?1?1?1?1?1?1?1)
Hash.Type....: MD5
Time.Running.: 3 mins, 54 secs
Time.Left....: 1 day, 13 hours
Time.Util....: 234147.9ms/0.9ms Real/CPU, 0.0% idle
Speed........: 1627.2M c/s Real, 1627.6M c/s GPU
Recovered....: 0/14 Digests, 0/1 Salts
Progress.....: 381010575360/218340105584896 (0.17%)
Rejected.....: 0/381010575360 (0.00%)
HW.Monitor.#1: 27% GPU, 62c Temp
HW.Monitor.#2: 100% GPU, 44c Temp
[s]tatus [p]ause [r]esume [q]uit =>
*******************************************
Windows7, same cards, stock clocks, Catalyst 12.4
Only iam have this problem?
#2
what is the problem? everything looks normal to me. if you are concerned about the GPU usage being unequal it's normal. you could try to increase gpu-loops to 1024
#3
its looks wrong for me because in hashcat plus 0.8 with catalyst 11.12 speed x2
#4
I just had another idea. Maybe you are running a task which uses GPGPU. Flash (inside browser) is such a beast.
#5
Reinstall windows 7 x64 ultimate and catalyst 12.4, nothing more.
Problem when in case 2 GPU, each solo GPU show good speed and load ~3M c/s on md5...but then 2, speed about 1.6M

with 11.12 catalyst
Hash.Type....: MD5
Time.Running.: 6 secs
Time.Left....: 10 hours, 27 mins
Time.Util....: 6964.5ms/1.0ms Real/CPU, 0.0% idle
Speed........: 5799.6M c/s Real, 5801.9M c/s GPU
Recovered....: 0/14 Digests, 0/1 Salts
Progress.....: 40391147520/218340105584896 (0.02%)
Rejected.....: 0/40391147520 (0.00%)
HW.Monitor.#1: 95% GPU, 62c Temp
HW.Monitor.#2: 95% GPU, 57c Temp
#6
I noticed this issue as well. Turning on Crossfire resolved it for me.