Hi,
I made a crack rig with 3x ASUS 1070 and I stuck a 1070 in my main computer to play with. Main system with 1 card runs win7 home prem, crack rig runs win 7 pro. On my crack rig with 3x 1070, Hashcat seems to run fine until you want to quit. I press Q and the cursor increments down one line but the prompt does not come back. The session does quit and card useages go back to 0 in afterburner, but the command window is hung. I can click the X to close the window, and it does close after 10 seconds or so.
On my main system with 1 card there is no issues with hashcat. I get sustained WPA rates of 250 kh/s with no tuning.
All 3 cards in the crack rig get same rates and I see sustained WPA rates of 820ish Kh/s but when you try to quit it barfs. I have attached an image showing several empty lines from pressing Q sveral times. Notice the plots drop off but the prompt never comes back.
Any input on the issue would be appreciated, also I would appreciate opinions on the crack rig hardware. Hopefully I did not skimp too much on CPU. Thank you
Crack rig with 3x 1070 on USB powered risers:
EVGA 1000 watt PSU
Win 7 pro
mobo: asrock H97 anniversary
CPU: Pentium G3258 3.2G
Memory: 8GB
monitor is connected to on-board HD graphics and the 3 1070s have no cables connected to them.
Main system with 1 1070:
Win 7 home prem
1000 watt EVGA PSU
mobo: EVGA x58 SLI from 2009
CPU: i7 990x 1st Gen
Memory 12 GB
1 1070
1.jpg (Size: 106.79 KB / Downloads: 15)
I made a crack rig with 3x ASUS 1070 and I stuck a 1070 in my main computer to play with. Main system with 1 card runs win7 home prem, crack rig runs win 7 pro. On my crack rig with 3x 1070, Hashcat seems to run fine until you want to quit. I press Q and the cursor increments down one line but the prompt does not come back. The session does quit and card useages go back to 0 in afterburner, but the command window is hung. I can click the X to close the window, and it does close after 10 seconds or so.
On my main system with 1 card there is no issues with hashcat. I get sustained WPA rates of 250 kh/s with no tuning.
All 3 cards in the crack rig get same rates and I see sustained WPA rates of 820ish Kh/s but when you try to quit it barfs. I have attached an image showing several empty lines from pressing Q sveral times. Notice the plots drop off but the prompt never comes back.
Any input on the issue would be appreciated, also I would appreciate opinions on the crack rig hardware. Hopefully I did not skimp too much on CPU. Thank you
Crack rig with 3x 1070 on USB powered risers:
EVGA 1000 watt PSU
Win 7 pro
mobo: asrock H97 anniversary
CPU: Pentium G3258 3.2G
Memory: 8GB
monitor is connected to on-board HD graphics and the 3 1070s have no cables connected to them.
Main system with 1 1070:
Win 7 home prem
1000 watt EVGA PSU
mobo: EVGA x58 SLI from 2009
CPU: i7 990x 1st Gen
Memory 12 GB
1 1070
1.jpg (Size: 106.79 KB / Downloads: 15)