3x mining rig rx570 rocm problem
#2
Hi, 

read my latest secjuice.com Article: https://www.secjuice.com/how-to-build-a-cracking-rig/

TL;DR: Use Windows instead. Install the old Crimson Driver, then Update Windows, download hashcat 4.2.1 and the hashtopolis C# Client :-).

If you desperately want to use Linux, the latest working version was 3.x.x with amdgpupro Drivers.

So, what I've tested:

* Linux + rocm + hashcat 4.2.1: Working only with the PCIE Ports that support PCIE Atomics (Which usually is one)
* Linux + amdgpupro + hashcat 3.6.0: Working, lacking some Hash-Types
* Windows + Latest AMD Driver + HashCat 4.2.0: Only some algos working, maybe fixed by atom, see release not 5.0.0
* Windows + Crimson 17.11.4 + HashCat 4.2.1: Working* 

* but extreme Lag before Windows Update 10-2018. See article.

Atom wrote he fixed the SegFault Problems with AMD, maybe with hashcat 5.0.0 current AMD Drivers are working, I haven't tried yet. 

(10-29-2018, 06:32 AM)technobro Wrote: the bios are mod , could it be only that ?, but then why one is recognized

If you mean VBios (The Graphic Card BIOS) and if they are modded for Mining, revert them. They will cause trouble - been there, done that.

BG Sebastian


Messages In This Thread
3x mining rig rx570 rocm problem - by technobro - 10-29-2018, 06:32 AM
RE: 3x mining rig rx570 rocm problem - by SecurityDoggo - 10-29-2018, 11:53 AM
RE: 3x mining rig rx570 rocm problem - by epixoip - 10-30-2018, 02:25 AM
RE: 3x mining rig rx570 rocm problem - by Flomac - 11-02-2018, 04:45 PM