cheap hardware for 200.0 kH/s WPA2 with single GPU
#1
hashcats

we have a super low budget, like 500 eur for a complete server

we aim for a speed around ....

Hashmode: 2500 - WPA/WPA2 ----> Speed.Dev.#1.....:   200.0 kH/s
Hashmode: 1700 - SHA-512 ----> Speed.Dev.#1.....:   500.0 MH/s

we consider to use one of these GPUs ....

wpa2 eur gpu
285000 300 GeForce GTX 1070
224000 160 Radeon RX 580
205800 200 GeForce GTX 1060 6GB, 1536/6144 MB
185000 250 Radeon RX 480

here is a gaming laptop for 1000 eur
MSI GL63 8RE-811 (0016P5-811)
GPU = GeForce GTX 1060 6GB, 1536/6144 MB

can we go cheaper than that? (1000 eur)
we only need a hashcat server,
so we dont need the display, for example.

what would be a minimal hardware setup .... ?
to run one of the above GPUs
and to avoid most bottlenecks

we guess a raspberry pi 3 is too weak .... why?
what are the limiting factors here?

greetings from a poor mans cave
(yes we have electricity)

edit, here is our current wishlist
GPU
190eur MSI GeForce GTX 1060 6GT OCV1, 6GB GDDR5, DVI, HDMI, DP (V809-2234R), 150Watt peak power consumption
board + cpu + ram with Intel Socket 1151
055eur ASRock H110M-G/M.2 (90-MXB5H0-A0UAYZ), MicroATX, 3xPCIe
055eur Intel Celeron G3930, 2x 2.90GHz, boxed (BX80677G3930)
037eur Crucial DIMM 8GB, DDR4-2400, CL17 (CT8G4DFS824A)
case
026eur Inter-Tech IT-5908 (88881237), ATX, 2.3kg, 34Liter
psu
080eur be quiet! Pure Power 10 700W ATX 2.4 (BN275), 30dB
= 443eur
makes sense?
Reply


Messages In This Thread
cheap hardware for 200.0 kH/s WPA2 with single GPU - by milaxnuts - 05-30-2019, 11:36 AM