04-01-2020, 04:45 PM
(This post was last modified: 04-01-2020, 04:49 PM by usarname__.)
(04-01-2020, 09:00 AM)philsmd Wrote: download. extract. enter folder. run (e.g. hashcat -b)
you only need to have 7-Zip installed to unpack the .7z file
and that is what i did!! But i have the same problem as i got on normal hashact... i report down the steps i did:
Code:
7-Zip (a) [64] 16.02 : Copyright (c) 1999-2016 Igor Pavlov : 2016-05-21
p7zip Version 16.02 (locale=it_IT.UTF-8,Utf16=on,HugeFiles=on,64 bits,12 CPUs AMD Ryzen 5 2600X Six-Core Processor (800F82),ASM,AES-NI)
Scanning the drive for archives:
1 file, 5820797 bytes (5685 KiB)
Extracting archive: hashcat-5.1.0+1764.7z
--
Path = hashcat-5.1.0+1764.7z
Type = 7z
Physical Size = 5820797
Headers Size = 14400
Method = LZMA2:27 LZMA:20 BCJ2
Solid = +
Blocks = 2
Would you like to replace the existing file:
Path: ./hashcat-5.1.0/OpenCL/inc_comp_multi.h
Size: 0 bytes
Modified: 2020-03-20 17:21:53
with the file from archive:
Path: hashcat-5.1.0/OpenCL/inc_comp_multi.h
Size: 0 bytes
Modified: 2020-04-01 10:26:28
? (Y)es / (N)o / (A)lways / (S)kip all / A(u)to rename all / (Q)uit? y
Would you like to replace the existing file:
Path: ./hashcat-5.1.0/OpenCL/inc_comp_multi_bs.h
Size: 0 bytes
Modified: 2020-03-20 17:21:53
with the file from archive:
Path: hashcat-5.1.0/OpenCL/inc_comp_multi_bs.h
Size: 0 bytes
Modified: 2020-04-01 10:26:28
? (Y)es / (N)o / (A)lways / (S)kip all / A(u)to rename all / (Q)uit? y
Would you like to replace the existing file:
Path: ./hashcat-5.1.0/OpenCL/inc_comp_single.h
Size: 0 bytes
Modified: 2020-03-20 17:21:53
with the file from archive:
Path: hashcat-5.1.0/OpenCL/inc_comp_single.h
Size: 0 bytes
Modified: 2020-04-01 10:26:28
? (Y)es / (N)o / (A)lways / (S)kip all / A(u)to rename all / (Q)uit? a
Everything is Ok
Folders: 43
Files: 1832
Size: 127629220
Compressed: 5820797then when i use hashcat -b i have this issues:
can u explain me how to fix it? (ps: i have a radeon rx 560)
Code:
:~/Scaricati$ sudo hashcat -b
hashcat (v5.1.0) starting in benchmark mode...
Benchmarking uses hand-optimized kernel code by default.
You can use it in your cracking session by setting the -O option.
Note: Using optimized kernel code limits the maximum supported password length.
To disable the optimized kernel code in benchmark mode, use the -w option.
OpenCL Platform #1: Advanced Micro Devices, Inc.
================================================
* Device #1: gfx803, 1740/2048 MB allocatable, 14MCU
Benchmark relevant options:
===========================
* --optimized-kernel-enable
Hashmode: 0 - MD5
Speed.#1.........: 4297.0 MH/s (53.76ms) @ Accel:512 Loops:128 Thr:256 Vec:1
Hashmode: 100 - SHA1
Speed.#1.........: 1603.2 MH/s (72.55ms) @ Accel:256 Loops:128 Thr:256 Vec:1
Hashmode: 1400 - SHA2-256
Speed.#1.........: 685.1 MH/s (84.95ms) @ Accel:256 Loops:64 Thr:256 Vec:1
Hashmode: 1700 - SHA2-512
Speed.#1.........: 210.7 MH/s (69.16ms) @ Accel:128 Loops:32 Thr:256 Vec:1
Hashmode: 2500 - WPA-EAPOL-PBKDF2 (Iterations: 4096)
clBuildProgram(): CL_BUILD_PROGRAM_FAILURE
/usr/bin/OpenCL/comgr-b51631/input/CompileSource:1016:15: warning: loop not unrolled: the optimizer was unable to perform the requested transformation; the transformation might be disabled or specified as part of an unsupported transformation ordering
__kernel void m02500_aux3 (KERN_ATTR_TMPS_ESALT (wpa_pbkdf2_tmp_t, wpa_eapol_t))
^
/usr/bin/OpenCL/comgr-b51631/input/CompileSource:1016:15: warning: loop not unrolled: the optimizer was unable to perform the requested transformation; the transformation might be disabled or specified as part of an unsupported transformation ordering
/usr/bin/OpenCL/comgr-b51631/input/CompileSource:1016:15: warning: loop not unrolled: the optimizer was unable to perform the requested transformation; the transformation might be disabled or specified as part of an unsupported transformation ordering
/usr/bin/OpenCL/comgr-b51631/input/CompileSource:1016:15: warning: loop not unrolled: the optimizer was unable to perform the requested transformation; the transformation might be disabled or specified as part of an unsupported transformation ordering
/usr/bin/OpenCL/comgr-b51631/input/CompileSource:1016:15: warning: loop not unrolled: the optimizer was unable to perform the requested transformation; the transformation might be disabled or specified as part of an unsupported transformation ordering
/usr/bin/OpenCL/comgr-b51631/input/CompileSource:1016:15: warning: loop not unrolled: the optimizer was unable to perform the requested transformation; the transformation might be disabled or specified as part of an unsupported transformation ordering
6 warnings generated.
warning: <unknown>:0:0: loop not unrolled: the optimizer was unable to perform the requested transformation; the transformation might be disabled or specified as part of an unsupported transformation ordering
warning: <unknown>:0:0: loop not unrolled: the optimizer was unable to perform the requested transformation; the transformation might be disabled or specified as part of an unsupported transformation ordering
warning: <unknown>:0:0: loop not unrolled: the optimizer was unable to perform the requested transformation; the transformation might be disabled or specified as part of an unsupported transformation ordering
warning: <unknown>:0:0: loop not unrolled: the optimizer was unable to perform the requested transformation; the transformation might be disabled or specified as part of an unsupported transformation ordering
warning: <unknown>:0:0: loop not unrolled: the optimizer was unable to perform the requested transformation; the transformation might be disabled or specified as part of an unsupported transformation ordering
warning: <unknown>:0:0: loop not unrolled: the optimizer was unable to perform the requested transformation; the transformation might be disabled or specified as part of an unsupported transformation ordering
6 warnings generated.
lld: error: undefined hidden symbol: sha1_hmac_init_global_swap
>>> referenced by /usr/bin/OpenCL/comgr-dbec69/input/linked.bc.o:(m02500_init)
>>> referenced by /usr/bin/OpenCL/comgr-dbec69/input/linked.bc.o:(m02500_init)
lld: error: undefined hidden symbol: sha1_hmac_final
>>> referenced by /usr/bin/OpenCL/comgr-dbec69/input/linked.bc.o:(m02500_init)
>>> referenced by /usr/bin/OpenCL/comgr-dbec69/input/linked.bc.o:(m02500_init)
>>> referenced by /usr/bin/OpenCL/comgr-dbec69/input/linked.bc.o:(m02500_aux1)
>>> referenced by /usr/bin/OpenCL/comgr-dbec69/input/linked.bc.o:(m02500_aux1)
>>> referenced by /usr/bin/OpenCL/comgr-dbec69/input/linked.bc.o:(m02500_aux1)
>>> referenced by /usr/bin/OpenCL/comgr-dbec69/input/linked.bc.o:(m02500_aux1)
>>> referenced by /usr/bin/OpenCL/comgr-dbec69/input/linked.bc.o:(m02500_aux2)
>>> referenced by /usr/bin/OpenCL/comgr-dbec69/input/linked.bc.o:(m02500_aux2)
>>> referenced by /usr/bin/OpenCL/comgr-dbec69/input/linked.bc.o:(m02500_aux2)
>>> referenced by /usr/bin/OpenCL/comgr-dbec69/input/linked.bc.o:(m02500_aux2)
lld: error: undefined hidden symbol: sha256_hmac_init_64
>>> referenced by /usr/bin/OpenCL/comgr-dbec69/input/linked.bc.o:(m02500_aux3)
>>> referenced by /usr/bin/OpenCL/comgr-dbec69/input/linked.bc.o:(m02500_aux3)
>>> referenced by /usr/bin/OpenCL/comgr-dbec69/input/linked.bc.o:(m02500_aux3)
>>> referenced by /usr/bin/OpenCL/comgr-dbec69/input/linked.bc.o:(m02500_aux3)
lld: error: undefined hidden symbol: sha256_hmac_final
>>> referenced by /usr/bin/OpenCL/comgr-dbec69/input/linked.bc.o:(m02500_aux3)
>>> referenced by /usr/bin/OpenCL/comgr-dbec69/input/linked.bc.o:(m02500_aux3)
>>> referenced by /usr/bin/OpenCL/comgr-dbec69/input/linked.bc.o:(m02500_aux3)
>>> referenced by /usr/bin/OpenCL/comgr-dbec69/input/linked.bc.o:(m02500_aux3)
Error: Creating the executable from LLVM IRs failed.
* Device #1: Kernel /usr/bin/OpenCL/m02500-pure.cl build failed - proceeding without this device.
Started: Wed Apr 1 16:41:47 2020
Stopped: Wed Apr 1 16:42:38 2020