+- hashcat Forum (https://hashcat.net/forum)
+-- Forum: Support (https://hashcat.net/forum/forum-3.html)
+--- Forum: hashcat (https://hashcat.net/forum/forum-45.html)
+--- Thread: How long will hashcat finish copying while restore (/thread-7076.html)
How long will hashcat finish copying while restore - DKblue - 12-04-2017
c:\hc>hashcat64 --restore
hashcat (v4.0.1) starting in restore mode...
OpenCL Platform #1: NVIDIA Corporation
======================================
* Device #1: GeForce GTX 1060 6GB, 1536/6144 MB allocatable, 10MCU
* Device #2: GeForce GTX 1060 6GB, 1536/6144 MB allocatable, 10MCU
OpenCL Platform #2: Advanced Micro Devices, Inc.
================================================
* Device #3: Spectre, skipped.
* Device #4: AMD A10-7700K Radeon R7, 10 Compute Cores 4C+6G, skipped.
Hashes: 3 digests; 3 unique digests, 1 unique salts
Bitmaps: 16 bits, 65536 entries, 0x0000ffff mask, 262144 bytes, 5/13 rotates
Rules: 18
Applicable optimizers:
* Zero-Byte
* Single-Salt
* Slow-Hash-SIMD-LOOP
Password length minimum: 8
Password length maximum: 63
Watchdog: Temperature abort trigger set to 90c
Watchdog: Temperature retain trigger set to 75c
Starting attack in stdin mode...
Session..........: hashcat
Status...........: Running
Hash.Type........: WPA/WPA2
Hash.Target......: final26c4.hccapx
Time.Started.....: Mon Dec 04 22:41:17 2017 (9 secs)
Time.Estimated...: Mon Dec 04 22:41:26 2017 (0 secs)
Guess.Base.......: Pipe
Guess.Mod........: Rules (symapd.rule)
Speed.Dev.#1.....: 0 H/s (0.00ms)
Speed.Dev.#2.....: 0 H/s (0.00ms)
Speed.Dev.#*.....: 0 H/s
Recovered........: 0/3 (0.00%) Digests, 0/1 (0.00%) Salts
Progress.........: 0
Rejected.........: 0
Restore.Point....: 0
Candidates.#1....: [Copying]
Candidates.#2....: [Copying]
HWMon.Dev.#1.....: Temp: 48c Fan: 33% Util: 0% Core:1506MHz Mem:3802MHz Bus:16
HWMon.Dev.#2.....: Temp: 46c Fan: 33% Util: 0% Core:1506MHz Mem:3802MHz Bus:4
Session..........: hashcat
Status...........: Running
Hash.Type........: WPA/WPA2
Hash.Target......: final26c4.hccapx
Time.Started.....: Mon Dec 04 22:41:17 2017 (9 mins, 12 secs)
Time.Estimated...: Mon Dec 04 22:50:29 2017 (0 secs)
Guess.Base.......: Pipe
Guess.Mod........: Rules (symapd.rule)
Speed.Dev.#1.....: 0 H/s (0.00ms)
Speed.Dev.#2.....: 0 H/s (0.00ms)
Speed.Dev.#*.....: 0 H/s
Recovered........: 0/3 (0.00%) Digests, 0/1 (0.00%) Salts
Progress.........: 0
Rejected.........: 0
Restore.Point....: 0
Candidates.#1....: [Copying]
Candidates.#2....: [Copying]
HWMon.Dev.#1.....: Temp: 28c Fan: 33% Util: 0% Core: 139MHz Mem: 405MHz Bus:16
HWMon.Dev.#2.....: Temp: 24c Fan: 33% Util: 0% Core: 139MHz Mem: 405MHz Bus:4
RE: How long will hashcat finish copying while restore - DKblue - 12-04-2017
few weeks ago I remembered waiting some 20 minutes and then gave up.Now this time I'm runing the task from yesterday till now, what a pity should I give up again
RE: How long will hashcat finish copying while restore - DKblue - 12-04-2017
here is my command
hashcat64 -a7 ?l?l?l? -i ymdlucky.txt --stdout|hashcat64 -m 2500 --nonce-error-corrections=0 -w 3 -d 1,2 final26c4.hccapx -r symapd.rule
ymdlucky.txt has about 40k lines,and symbleapd-rules has about 20 lines.
and the task has being runing maybe 15 hours or more.
SO ,how soon will hashcat finishing copying? The time-consuming depends by what? Andbody help?
I was greping two files wanna look up the differences just moments ago
some thing like grep -wvf test1 test2 ,and then the damned windows falts reporting
RE: How long will hashcat finish copying while restore - logistix111 - 12-04-2017
(12-04-2017, 05:17 PM)DKblue Wrote: here is my command
hashcat64 -a7 ?l?l?l? -i ymdlucky.txt --stdout|hashcat64 -m 2500 --nonce-error-corrections=0 -w 3 -d 1,2 final26c4.hccapx -r symapd.rule
ymdlucky.txt has about 40k lines,and symbleapd-rules has about 20 lines.
and the task has being runing maybe 15 hours or more.
SO ,how soon will hashcat finishing copying? The time-consuming depends by what? Andbody help?
I was greping two files wanna look up the differences just moments ago
some thing like grep -wvf test1 test2 ,and then the damned windows falts reporting
Did you hit the "s" key on your keyboard at any point during the cracking session? It will give you a time estimate. Looks like you have a bunch of junk switches/arguments in your command. Try simplifying it along with using -w 4 instead of -w 3.
RE: How long will hashcat finish copying while restore - DKblue - 12-04-2017
(12-04-2017, 05:21 PM)logistix111 Wrote:(12-04-2017, 05:17 PM)DKblue Wrote: here is my command
hashcat64 -a7 ?l?l?l? -i ymdlucky.txt --stdout|hashcat64 -m 2500 --nonce-error-corrections=0 -w 3 -d 1,2 final26c4.hccapx -r symapd.rule
ymdlucky.txt has about 40k lines,and symbleapd-rules has about 20 lines.
and the task has being runing maybe 15 hours or more.
SO ,how soon will hashcat finishing copying? The time-consuming depends by what? Andbody help?
I was greping two files wanna look up the differences just moments ago
some thing like grep -wvf test1 test2 ,and then the damned windows falts reporting
Did you hit the "s" key on your keyboard at any point during the cracking session? It will give you a time estimate. Looks like you have a bunch of junk switches/arguments in your command. Try simplifying it along with using -w 4 instead of -w 3.
Does pipe supports pause??
RE: How long will hashcat finish copying while restore - royce - 12-06-2017
(12-04-2017, 05:25 PM)DKblue Wrote: Does pipe supports pause??
I don't think that pipe supports pause. But you can pause the entire job on Unix-likes with Control-Z, and then restore it with 'fg'.
RE: How long will hashcat finish copying while restore - DKblue - 12-07-2017
hi logistix111
your suggestion made me read the hashcat-h again ,and noticed this parameter --status
maybe that's what you talking about,Itried but recieved no pause-bar.
Anyway,u'r right and I'm simplifying my command ,and also configured w4 in night-time,
day-time with -w 4 -d 1,2.Thank U.
RE: How long will hashcat finish copying while restore - DKblue - 12-07-2017
Hi royce
Thank u for reply,and I did test --status while pipe yesterday as I mentioned above.
I used ctrl+c under win10，thanks.
RE: How long will hashcat finish copying while restore - DKblue - 12-08-2017
hi royce ,I realized misunderstood you yesterday and sorry!
U'r talking about pause hashcat pipe session in linux ,and I do know there is no better way to pause pipe under win-platform ，ctrl+c terminated all ,though I can run --restore later but it's certainly bad idea.