HW.Monitor never > 70% GPU
#1
Hello, take a look
I'm using latest 0.07 version
I could never get more than 70% of GPU to be used... no matter what I do
I have 6950 card, and if no settings are passed just -a 3 -m 500 and mask i sometimes get around 90%. Is is possible to tune this to be 100% of GPU or no ?

Thanks in advance

Status.......: Running
Input.Mode...: Mask (?1?1?1?1?1?1?1)
Hash.Type....: md5crypt, MD5(Unix), FreeBSD MD5, Cisco-IOS MD5
Time.Running.: 3 mins, 17 secs
Time.Left....: 1 day, 5 hours
Time.Util....: 197821.1ms/76012.1ms Real/CPU, 62.4% idle
Speed........: 1480.4k c/s Real, 2213.3k c/s GPU
Recovered....: 0/2 Digests, 0/2 Salts
Progress.....: 292864000/156728328192 (0.19%)
Rejected.....: 0/292864000 (0.00%)
HW.Monitor.#1: 66% GPU, 58c Temp
[s]tatus [p]ause [r]esume [q]uit =>
#2
this heavily depends on the algorithm used. in case of highly iterated one you have a lot of memory swapping to be done, so the ALU cannot be held busy. i will try to improve it, but its unrealistic to make it to 99% on all algorithms