following linux_server_howto guide. problem with 6th GPU - Printable Version +- hashcat Forum (https://hashcat.net/forum) +-- Forum: Deprecated; Previous versions (https://hashcat.net/forum/forum-29.html) +--- Forum: General Help (https://hashcat.net/forum/forum-8.html) +--- Thread: following linux_server_howto guide. problem with 6th GPU (/thread-3020.html) |
following linux_server_howto guide. problem with 6th GPU - user29 - 01-13-2014 been following this howto. I'm not installing oclHashcat yet, only drivers. It works with 5 cards (openbox boots, clinfo shows all 5 cards, amdconfig reports temperatures) but won't with 6. Openbox won't boot and amdconfig hangs. lspci shows all 6 cards though (7970 - actually 280X). Should it work with 6? Thanks RE: following linux_server_howto guide. problem with 6th GPU - epixoip - 01-13-2014 yes, it should work with up to 8. have you tested to see if the sixth GPU is even good? RE: following linux_server_howto guide. problem with 6th GPU - user29 - 01-13-2014 Yes I did. I tried pull out different cards. Only total qty matters. RE: following linux_server_howto guide. problem with 6th GPU - user29 - 01-13-2014 (01-13-2014, 08:46 PM)epixoip Wrote: yes, it should work with up to 8. have you tested to see if the sixth GPU is even good?Okay if you say it should I will experiment a bit more. Powered risers, all that stuff. Thanks RE: following linux_server_howto guide. problem with 6th GPU - epixoip - 01-14-2014 risers should be your #1 suspect. RE: following linux_server_howto guide. problem with 6th GPU - user29 - 02-19-2014 thought I get back and post how it all turned out. First of all, turned out it wasn't 6th GPU specifically, Xserver crashed randomly but the more GPU the more chances of a crash. It's my mining rig which runs okay under Windows so I was a bit puzzled. After about 2 weeks I tried again and it worked as advertised. Either motherboard bios upgrade is the reason (MSI Z77A-G45 bios v 2.12) or some ubuntu packages where updated in the meantime. I have already 2 of the rigs converted to ubuntu and they are running okay for a week now. Time to do some hashcating! |