hashcat Forum
Sapphire r9 290x 4gb - Printable Version

+- hashcat Forum (https://hashcat.net/forum)
+-- Forum: Deprecated; Previous versions (https://hashcat.net/forum/forum-29.html)
+--- Forum: Old oclHashcat Support (https://hashcat.net/forum/forum-38.html)
+--- Thread: Sapphire r9 290x 4gb (/thread-4418.html)

Sapphire r9 290x 4gb - z3roc00l - 06-08-2015

After finally getting the funds in order i built my self a little machine nothing to special but does they job for me.
I have been doing a few test's over last few day's and it seems ok so far, but i noticed something on the bench mark test i did.
WHere it says
Code:
Device #1: Hawaii, 3072MB

Shouldn't it be
Code:
Device #1: Hawaii, 4032MB,

Spec's and benchmark results

http://i.imgur.com/e9q9rGv.png

Benchmark result's
Code:
Display Driver version 14.301.1001.0 BIOS Version 113-C6710100-102 PS F:\oclHashcat-1.36> ./oclHashcat64.exe -b oclHashcat v1.36 starting in benchmark-mode... Device #1: Hawaii, 3072MB, 1000Mhz, 44MCU Hashtype: MD4 Workload: 1024 loops, 256 accel Speed.GPU.#1.: 22113.8 MH/s Hashtype: MD5 Workload: 1024 loops, 256 accel Speed.GPU.#1.: 11055.6 MH/s Hashtype: SHA1 Workload: 1024 loops, 256 accel Speed.GPU.#1.: 3968.8 MH/s Hashtype: SHA256 Workload: 512 loops, 256 accel Speed.GPU.#1.: 1433.4 MH/s Hashtype: SHA384 Workload: 256 loops, 256 accel Speed.GPU.#1.: 530.4 MH/s Hashtype: SHA512 Workload: 256 loops, 256 accel Speed.GPU.#1.: 532.6 MH/s Hashtype: SHA-3(Keccak) Workload: 512 loops, 256 accel Speed.GPU.#1.: 247.8 MH/s Hashtype: RipeMD160 Workload: 512 loops, 256 accel Speed.GPU.#1.: 2327.4 MH/s Hashtype: Whirlpool Workload: 512 loops, 32 accel Speed.GPU.#1.: 129.9 MH/s Hashtype: GOST R 34.11-94 Workload: 512 loops, 64 accel Speed.GPU.#1.: 157.6 MH/s Hashtype: SAP CODVN B (BCODE) Workload: 1024 loops, 64 accel Speed.GPU.#1.: 948.3 MH/s Hashtype: SAP CODVN F/G (PASSCODE) Workload: 512 loops, 32 accel Speed.GPU.#1.: 225.7 MH/s Hashtype: SAP CODVN H (PWDSALTEDHASH) iSSHA-1 Workload: 1024 loops, 16 accel Speed.GPU.#1.: 2363.8 kH/s Hashtype: Lotus Notes/Domino 5 Workload: 128 loops, 32 accel Speed.GPU.#1.: 192.9 MH/s Hashtype: Lotus Notes/Domino 6 Workload: 128 loops, 32 accel Speed.GPU.#1.: 34035.1 kH/s Hashtype: Lotus Notes/Domino 8 Workload: 1024 loops, 64 accel Speed.GPU.#1.: 294.0 kH/s Hashtype: SHA-1(Base64), nsldap, Netscape LDAP SHA Workload: 1024 loops, 256 accel Speed.GPU.#1.: 3921.8 MH/s Hashtype: SSHA-1(Base64), nsldaps, Netscape LDAP SSHA Workload: 1024 loops, 256 accel Speed.GPU.#1.: 3913.4 MH/s Hashtype: descrypt, DES(Unix), Traditional DES Workload: 128 loops, 64 accel Speed.GPU.#1.: 157.4 MH/s Hashtype: md5crypt, MD5(Unix), FreeBSD MD5, Cisco-IOS MD5 Workload: 1000 loops, 32 accel Speed.GPU.#1.: 4778.3 kH/s Hashtype: sha256crypt, SHA256(Unix) Workload: 1024 loops, 4 accel Speed.GPU.#1.: 157.2 kH/s Hashtype: sha512crypt, SHA512(Unix) Workload: 1024 loops, 8 accel Speed.GPU.#1.: 70337 H/s Hashtype: bcrypt, Blowfish(OpenBSD) Workload: 32 loops, 2 accel Speed.GPU.#1.: 7193 H/s Hashtype: LM Workload: 128 loops, 256 accel Speed.GPU.#1.: 1999.3 MH/s Hashtype: NTLM Workload: 1024 loops, 256 accel Speed.GPU.#1.: 21342.3 MH/s Hashtype: DCC, mscash Workload: 1024 loops, 256 accel Speed.GPU.#1.: 5641.1 MH/s Hashtype: NetNTLMv1-VANILLA / NetNTLMv1+ESS Workload: 1024 loops, 256 accel Speed.GPU.#1.: 11603.7 MH/s Hashtype: NetNTLMv2 Workload: 512 loops, 256 accel Speed.GPU.#1.: 752.9 MH/s Hashtype: Kerberos 5 AS-REQ Pre-Auth etype 23 Workload: 128 loops, 32 accel Speed.GPU.#1.: 54525.3 kH/s Hashtype: EPiServer 6.x < v4 Workload: 1024 loops, 256 accel Speed.GPU.#1.: 2834.2 MH/s Hashtype: EPiServer 6.x > v4 Workload: 512 loops, 256 accel Speed.GPU.#1.: 1239.1 MH/s Hashtype: MSSQL(2000) Workload: 1024 loops, 256 accel Speed.GPU.#1.: 3894.3 MH/s Hashtype: MSSQL(2005) Workload: 1024 loops, 256 accel Speed.GPU.#1.: 3900.5 MH/s Hashtype: MSSQL(2012) Workload: 256 loops, 256 accel Speed.GPU.#1.: 530.5 MH/s Hashtype: MySQL323 Workload: 1024 loops, 256 accel Speed.GPU.#1.: 25764.8 MH/s Hashtype: MySQL4.1/MySQL5 Workload: 512 loops, 256 accel Speed.GPU.#1.: 1643.7 MH/s Hashtype: Oracle 7-10g Workload: 128 loops, 64 accel Speed.GPU.#1.: 849.8 MH/s Hashtype: Sybase ASE Workload: 512 loops, 32 accel Speed.GPU.#1.: 165.9 MH/s Hashtype: Oracle 11g/12c Workload: 1024 loops, 256 accel Speed.GPU.#1.: 3916.1 MH/s Hashtype: PostgreSQL Challenge-Response Authentication (MD5) Workload: 1024 loops, 256 accel Speed.GPU.#1.: 2884.5 MH/s Hashtype: MySQL Challenge-Response Authentication (SHA1) Workload: 1024 loops, 256 accel Speed.GPU.#1.: 1039.7 MH/s Hashtype: OSX v10.4, v10.5, v10.6 Workload: 1024 loops, 256 accel Speed.GPU.#1.: 2839.6 MH/s Hashtype: OSX v10.7 Workload: 256 loops, 256 accel Speed.GPU.#1.: 504.4 MH/s Hashtype: OSX v10.8+ Workload: 1024 loops, 2 accel Speed.GPU.#1.: 1064 H/s Hashtype: Android PIN Workload: 1024 loops, 16 accel Speed.GPU.#1.: 1634.2 kH/s Hashtype: Android FDE <= 4.3 Workload: 1024 loops, 32 accel Speed.GPU.#1.: 362.9 kH/s Hashtype: scrypt Workload: 1 loops, 64 accel Speed.GPU.#1.: 684.3 kH/s Hashtype: Cisco-PIX MD5 Workload: 1024 loops, 256 accel Speed.GPU.#1.: 7253.1 MH/s Hashtype: Cisco-ASA MD5 Workload: 1024 loops, 256 accel Speed.GPU.#1.: 6773.6 MH/s Hashtype: Cisco-IOS SHA256 Workload: 512 loops, 256 accel Speed.GPU.#1.: 1421.6 MH/s Hashtype: Cisco $8$ Workload: 1024 loops, 8 accel Speed.GPU.#1.: 31986 H/s Hashtype: Cisco $9$ Workload: 1 loops, 4 accel Speed.GPU.#1.: 4745 H/s Hashtype: Juniper IVE Workload: 1000 loops, 32 accel Speed.GPU.#1.: 4764.2 kH/s Hashtype: Citrix NetScaler Workload: 1024 loops, 256 accel Speed.GPU.#1.: 3061.7 MH/s Hashtype: DNSSEC (NSEC3) Workload: 512 loops, 256 accel Speed.GPU.#1.: 1341.3 MH/s Hashtype: WPA/WPA2 Workload: 1024 loops, 32 accel Speed.GPU.#1.: 179.5 kH/s Hashtype: IKE-PSK MD5 Workload: 256 loops, 128 accel Speed.GPU.#1.: 802.8 MH/s Hashtype: IKE-PSK SHA1 Workload: 256 loops, 128 accel Speed.GPU.#1.: 374.3 MH/s Hashtype: Password Safe v2 Workload: 1000 loops, 16 accel Speed.GPU.#1.: 149.8 kH/s Hashtype: Password Safe v3 Workload: 1024 loops, 16 accel Speed.GPU.#1.: 648.5 kH/s Hashtype: 1Password, agilekeychain Workload: 1000 loops, 64 accel Speed.GPU.#1.: 1467.6 kH/s Hashtype: 1Password, cloudkeychain Workload: 1024 loops, 2 accel Speed.GPU.#1.: 930 H/s Hashtype: AIX {ssha1} Workload: 64 loops, 128 accel Speed.GPU.#1.: 20098.1 kH/s Hashtype: TrueCrypt 5.0+ PBKDF2-HMAC-RipeMD160 + AES Workload: 1024 loops, 64 accel Speed.GPU.#1.: 541.4 kH/s Hashtype: TrueCrypt 5.0+ PBKDF2-HMAC-SHA512 + AES Workload: 1000 loops, 16 accel Speed.GPU.#1.: 75270 H/s Hashtype: TrueCrypt 5.0+ PBKDF2-HMAC-Whirlpool + AES Workload: 1000 loops, 8 accel Speed.GPU.#1.: 21512 H/s Hashtype: TrueCrypt 5.0+ PBKDF2-HMAC-RipeMD160 + AES + boot-mode Workload: 1000 loops, 64 accel Speed.GPU.#1.: 1071.6 kH/s Hashtype: Office 2007 Workload: 1024 loops, 32 accel Speed.GPU.#1.: 58664 H/s Hashtype: Office 2010 Workload: 1024 loops, 32 accel Speed.GPU.#1.: 29298 H/s Hashtype: Office 2013 Workload: 1024 loops, 4 accel Speed.GPU.#1.: 4124 H/s Hashtype: MS Office <= 2003 MD5 + RC4, oldoffice$0, oldoffice$1 Workload: 1024 loops, 32 accel Speed.GPU.#1.: 54552.6 kH/s Hashtype: MS Office <= 2003 SHA1 + RC4, oldoffice$3, oldoffice$4 Workload: 1024 loops, 32 accel Speed.GPU.#1.: 59972.4 kH/s Hashtype: PDF 1.1 - 1.3 (Acrobat 2 - 4) Workload: 1024 loops, 32 accel Speed.GPU.#1.: 136.2 MH/s Hashtype: PDF 1.1 - 1.3 (Acrobat 2 - 4) + collider-mode #1 Workload: 1024 loops, 32 accel Speed.GPU.#1.: 149.8 MH/s Hashtype: PDF 1.1 - 1.3 (Acrobat 2 - 4) + collider-mode #2 Workload: 1024 loops, 32 accel Speed.GPU.#1.: 2944.4 MH/s Hashtype: PDF 1.4 - 1.6 (Acrobat 5 - 8) Workload: 70 loops, 256 accel Speed.GPU.#1.: 6697.0 kH/s Hashtype: PDF 1.7 Level 3 (Acrobat 9) Workload: 512 loops, 256 accel Speed.GPU.#1.: 1420.0 MH/s Hashtype: PDF 1.7 Level 8 (Acrobat 10 - 11) Workload: 64 loops, 8 accel Speed.GPU.#1.: 6550 H/s Hashtype: Drupal7 Workload: 1024 loops, 8 accel Speed.GPU.#1.: 26121 H/s Hashtype: HMAC-MD5 (key = $pass) Workload: 512 loops, 256 accel Speed.GPU.#1.: 1580.1 MH/s Hashtype: HMAC-MD5 (key = $salt) Workload: 512 loops, 256 accel Speed.GPU.#1.: 3106.5 MH/s Hashtype: HMAC-SHA1 (key = $pass) Workload: 512 loops, 256 accel Speed.GPU.#1.: 770.9 MH/s Hashtype: HMAC-SHA1 (key = $salt) Workload: 512 loops, 256 accel Speed.GPU.#1.: 1518.2 MH/s Hashtype: HMAC-SHA256 (key = $pass) Workload: 256 loops, 128 accel Speed.GPU.#1.: 338.2 MH/s Hashtype: HMAC-SHA256 (key = $salt) Workload: 256 loops, 128 accel Speed.GPU.#1.: 566.9 MH/s Hashtype: HMAC-SHA512 (key = $pass) Workload: 128 loops, 128 accel Speed.GPU.#1.: 39235.4 kH/s Hashtype: HMAC-SHA512 (key = $salt) Workload: 128 loops, 128 accel Speed.GPU.#1.: 78715.9 kH/s Hashtype: IPMI2 RAKP HMAC-SHA1 Workload: 512 loops, 256 accel Speed.GPU.#1.: 763.1 MH/s Hashtype: Half MD5 Workload: 1024 loops, 256 accel Speed.GPU.#1.: 6334.4 MH/s Hashtype: Double MD5 Workload: 1024 loops, 256 accel Speed.GPU.#1.: 2685.4 MH/s Hashtype: GRUB 2 Workload: 1024 loops, 2 accel Speed.GPU.#1.: 3723 H/s Hashtype: phpass, MD5(Wordpress), MD5(phpBB3), MD5(Joomla) Workload: 1024 loops, 32 accel Speed.GPU.#1.: 2770.7 kH/s Hashtype: SIP digest authentication (MD5) Workload: 1024 loops, 32 accel Speed.GPU.#1.: 1386.9 MH/s Hashtype: SipHash Workload: 1024 loops, 256 accel Speed.GPU.#1.: 16999.7 MH/s Hashtype: Joomla < 2.5.18 Workload: 1024 loops, 256 accel Speed.GPU.#1.: 10918.0 MH/s Hashtype: osCommerce, xt:Commerce Workload: 1024 loops, 256 accel Speed.GPU.#1.: 6103.9 MH/s Hashtype: PrestaShop Workload: 1024 loops, 256 accel Speed.GPU.#1.: 3532.4 MH/s Hashtype: IPB2+, MyBB1.2+ Workload: 512 loops, 256 accel Speed.GPU.#1.: 1994.1 MH/s Hashtype: vBulletin < v3.8.5 Workload: 1024 loops, 256 accel Speed.GPU.#1.: 2680.7 MH/s Hashtype: PHPS Workload: 1024 loops, 256 accel Speed.GPU.#1.: 2694.8 MH/s Hashtype: vBulletin > v3.8.5 Workload: 512 loops, 256 accel Speed.GPU.#1.: 1926.9 MH/s Hashtype: SMF > v1.1 Workload: 1024 loops, 256 accel Speed.GPU.#1.: 2867.6 MH/s Started: Sat Jun 06 17:27:50 2015 Stopped: Sat Jun 06 17:58:55 2015



I'm not sure if the speeds are fast for the card, but it does me.
I am new to all this so it could all be working as it should, got to check these these out last thing i need is it blowing up.
PS why no spoiler tags.

Thanks very much.
My full build @instagram

RE: Sapphire r9 290x 4gb - smokey - 06-08-2015

I use the same gpu, Ive got 5 of them.
I get the same speeds as you on wpa2 with the basic command, but if add -n 32 to the command it goes from 179 kh/s to 189 - 190kh/s.

Also I have read someone managed to get over 200 kh/s by adding the --gpu-loops command but it didn't work for me.

RE: Sapphire r9 290x 4gb - epixoip - 06-08-2015

The reported memory is fine. Not all of the memory is available for compute tasks.

RE: Sapphire r9 290x 4gb - z3roc00l - 06-08-2015

(06-08-2015, 04:03 PM)smokey Wrote: I use the same gpu, Ive got 5 of them.
I get the same speeds as you on wpa2 with the basic command, but if add -n 32 to the command it goes from 179 kh/s to 189 - 190kh/s.

Also I have read someone managed to get over 200 kh/s by adding the --gpu-loops command but it didn't work for me.

5 wow, i would love that many. You got any pics?
Its sitting at about 165 now which i'm happy with.


(06-08-2015, 08:02 PM)epixoip Wrote: The reported memory is fine. Not all of the memory is available for compute tasks.

ok thanks for that good to know, i just need to keep an eye the 80oc temp might need some more cooling i think.

RE: Sapphire r9 290x 4gb - epixoip - 06-08-2015

Are you manually setting your fan to 90-100%?

RE: Sapphire r9 290x 4gb - z3roc00l - 06-08-2015

(06-08-2015, 08:50 PM)epixoip Wrote: Are you manually setting your fan to 90-100%?

Nope i let it control it's self, if it goes above 80oC fan kicks in and brings it down.
wasn't sure if it's best idea to have fan blasting constantly at 90-100%

RE: Sapphire r9 290x 4gb - epixoip - 06-08-2015

It's a really bad idea to let the BIOS manage the fan speed automatically, because it's programmed for gaming workloads, not compute workloads. You really must set the fan speed manually. Yes, it's okay to have the fan run at full speed.

RE: Sapphire r9 290x 4gb - Si2006 - 06-08-2015

Add --gpu-temp-retain=20, that will keep the fans at 100% throughout an attack.

RE: Sapphire r9 290x 4gb - Rolf - 06-09-2015

With lower temperatures slow down the natural deterioration of hardware, so setting the fans to maximum is a good idea.