How long will hashcat finish copying while restore
#1
c:\hc>hashcat64 --restore
hashcat (v4.0.1) starting in restore mode...
OpenCL Platform #1: NVIDIA Corporation
======================================
* Device #1: GeForce GTX 1060 6GB, 1536/6144 MB allocatable, 10MCU
* Device #2: GeForce GTX 1060 6GB, 1536/6144 MB allocatable, 10MCU
OpenCL Platform #2: Advanced Micro Devices, Inc.
================================================
* Device #3: Spectre, skipped.
* Device #4: AMD A10-7700K Radeon R7, 10 Compute Cores 4C+6G, skipped.
Hashes: 3 digests; 3 unique digests, 1 unique salts
Bitmaps: 16 bits, 65536 entries, 0x0000ffff mask, 262144 bytes, 5/13 rotates
Rules: 18
Applicable optimizers:
* Zero-Byte
* Single-Salt
* Slow-Hash-SIMD-LOOP
Password length minimum: 8
Password length maximum: 63
Watchdog: Temperature abort trigger set to 90c
Watchdog: Temperature retain trigger set to 75c
Starting attack in stdin mode...
Session..........: hashcat
Status...........: Running
Hash.Type........: WPA/WPA2
Hash.Target......: final26c4.hccapx
Time.Started.....: Mon Dec 04 22:41:17 2017 (9 secs)
Time.Estimated...: Mon Dec 04 22:41:26 2017 (0 secs)
Guess.Base.......: Pipe
Guess.Mod........: Rules (symapd.rule)
Speed.Dev.#1.....:        0 H/s (0.00ms)
Speed.Dev.#2.....:        0 H/s (0.00ms)
Speed.Dev.#*.....:        0 H/s
Recovered........: 0/3 (0.00%) Digests, 0/1 (0.00%) Salts
Progress.........: 0
Rejected.........: 0
Restore.Point....: 0
Candidates.#1....: [Copying]
Candidates.#2....: [Copying]
HWMon.Dev.#1.....: Temp: 48c Fan: 33% Util:  0% Core:1506MHz Mem:3802MHz Bus:16
HWMon.Dev.#2.....: Temp: 46c Fan: 33% Util:  0% Core:1506MHz Mem:3802MHz Bus:4
Session..........: hashcat
Status...........: Running
Hash.Type........: WPA/WPA2
Hash.Target......: final26c4.hccapx
Time.Started.....: Mon Dec 04 22:41:17 2017 (9 mins, 12 secs)
Time.Estimated...: Mon Dec 04 22:50:29 2017 (0 secs)
Guess.Base.......: Pipe
Guess.Mod........: Rules (symapd.rule)
Speed.Dev.#1.....:        0 H/s (0.00ms)
Speed.Dev.#2.....:        0 H/s (0.00ms)
Speed.Dev.#*.....:        0 H/s
Recovered........: 0/3 (0.00%) Digests, 0/1 (0.00%) Salts
Progress.........: 0
Rejected.........: 0
Restore.Point....: 0
Candidates.#1....: [Copying]
Candidates.#2....: [Copying]
HWMon.Dev.#1.....: Temp: 28c Fan: 33% Util:  0% Core: 139MHz Mem: 405MHz Bus:16
HWMon.Dev.#2.....: Temp: 24c Fan: 33% Util:  0% Core: 139MHz Mem: 405MHz Bus:4


Messages In This Thread
How long will hashcat finish copying while restore - by DKblue - 12-04-2017, 04:52 PM