Posts: 30
Threads: 8
Joined: May 2016
Hi guys,
I've installed the second 1070 today via pciex16 (full) riser.
The cards are not connected via SLI. However the system doesnt recognize the second card.
Any idea - since you guys handle multiple gpus regularily? Some Mobo setting necessary? (The board is a P5B-deluxe)
Code: ==============NVSMI LOG==============
Timestamp : Wed Sep 14 08:55:15 2016
Driver Version : 370.28
Attached GPUs : 1
Posts: 87
Threads: 4
Joined: Dec 2015
Posts: 30
Threads: 8
Joined: May 2016
Yes, indeed. First thing I checked...
Sorry did not send this info
I think its a 32bit kernel issue
[ 8.864017] vmap allocation for size 16781312 failed: use vmalloc=<size> to increase size.
ftp://download.nvidia.com/XFree86/Linux-...ssues.html
Might try changing the kernel to 64 bits now
Code: 00:00.0 Host bridge: Intel Corporation 82P965/G965 Memory Controller Hub (rev 02)
00:01.0 PCI bridge: Intel Corporation 82P965/G965 PCI Express Root Port (rev 02)
00:1a.0 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 (rev 02)
00:1a.1 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 02)
00:1a.7 USB controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 02)
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 02)
00:1c.4 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 5 (rev 02)
00:1c.5 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 6 (rev 02)
00:1d.0 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 02)
00:1d.1 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 02)
00:1d.2 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 (rev 02)
00:1d.7 USB controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev f2)
00:1f.0 ISA bridge: Intel Corporation 82801HB/HR (ICH8/R) LPC Interface Controller (rev 02)
00:1f.2 IDE interface: Intel Corporation 82801H (ICH8 Family) 4 port SATA Controller [IDE mode] (rev 02)
00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 02)
00:1f.5 IDE interface: Intel Corporation 82801HR/HO/HH (ICH8R/DO/DH) 2 port SATA Controller [IDE mode] (rev 02)
01:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
01:00.1 Audio device: NVIDIA Corporation Device 10f0 (rev a1)
02:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8056 PCI-E Gigabit Ethernet Controller (rev 12)
03:00.0 SATA controller: JMicron Technology Corp. JMB363 SATA/IDE Controller (rev 02)
03:00.1 IDE interface: JMicron Technology Corp. JMB363 SATA/IDE Controller (rev 02)
04:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
04:00.1 Audio device: NVIDIA Corporation Device 10f0 (rev a1)
05:03.0 FireWire (IEEE 1394): Texas Instruments TSB43AB22A IEEE-1394a-2000 Controller (PHY/Link) [iOHCI-Lynx]
05:04.0 Ethernet controller: Marvell Technology Group Ltd. 88E8001 Gigabit Ethernet Controller (rev 14)
Code: client1 linux # dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 4.4.6-gentoo (root@client1) (gcc version 4.9.3 (Gentoo 4.9.3 p1.5, pie-0.6.4) ) #1 SMP Fri Sep 2 07:56:06 Local time zone must be set--see zic m
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers'
[ 0.000000] x86/fpu: Enabled xstate features 0x3, context size is 576 bytes, using 'standard' format.
[ 0.000000] x86/fpu: Using 'lazy' FPU context switches.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000aff8ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000aff90000-0x00000000aff9dfff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000aff9e000-0x00000000affdffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000affe0000-0x00000000afffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved
[ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
[ 0.000000] SMBIOS 2.4 present.
[ 0.000000] DMI: System manufacturer System Product Name/P5B-Deluxe, BIOS 1238 09/30/2008
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0xaff90 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-DFFFF uncachable
[ 0.000000] E0000-EFFFF write-through
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 080000000 mask FE0000000 write-back
[ 0.000000] 2 base 0A0000000 mask FF0000000 write-back
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] initial memory mapped: [mem 0x00000000-0x01ffffff]
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] BRK [0x01a56000, 0x01a56fff] PGTABLE
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000FAE70 000014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT 0x00000000AFF90000 000038 (v01 MSTEST TESTONLY 09000830 MSFT 00000097)
[ 0.000000] ACPI: FACP 0x00000000AFF90200 000084 (v02 MSTEST OEMFACP 09000830 MSFT 00000097)
[ 0.000000] ACPI: DSDT 0x00000000AFF905C0 00918E (v01 A0483 A0483035 00000035 INTL 20060113)
[ 0.000000] ACPI: FACS 0x00000000AFF9E000 000040
[ 0.000000] ACPI: APIC 0x00000000AFF90390 00006C (v01 MSTEST OEMAPIC 09000830 MSFT 00000097)
[ 0.000000] ACPI: MCFG 0x00000000AFF90400 00003C (v01 MSTEST OEMMCFG 09000830 MSFT 00000097)
[ 0.000000] ACPI: OEMB 0x00000000AFF9E040 00007B (v01 MSTEST AMI_OEM 09000830 MSFT 00000097)
[ 0.000000] ACPI: HPET 0x00000000AFF99750 000038 (v01 MSTEST OEMHPET 09000830 MSFT 00000097)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 1927MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] BRK [0x01a57000, 0x01a57fff] PGTABLE
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] Normal [mem 0x0000000001000000-0x00000000377fdfff]
[ 0.000000] HighMem [mem 0x00000000377fe000-0x00000000aff8ffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000aff8ffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x00000000aff8ffff]
[ 0.000000] On node 0 totalpages: 720686
[ 0.000000] DMA zone: 36 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] Normal zone: 1962 pages used for memmap
[ 0.000000] Normal zone: 223230 pages, LIFO batch:31
[ 0.000000] HighMem zone: 493458 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] e820: [mem 0xb0000000-0xfedfffff] available for PCI devices
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 18 pages/cpu @f5eea000 s44364 r0 d29364 u73728
[ 0.000000] pcpu-alloc: s44364 r0 d29364 u73728 alloc=18*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 718688
[ 0.000000] Kernel command line: auto BOOT_IMAGE=Gentoo ro root=806 net.ifnames=0 panic=10 rootfstype=ext4
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (000377fe:000aff90)
[ 0.000000] Initializing Movable for node 0 (00000000:00000000)
[ 0.000000] Memory: 2845604K/2882744K available (5890K kernel code, 664K rwdata, 2380K rodata, 696K init, 880K bss, 37140K reserved, 0K cma-reserved, 1973832K highmem)
[ 0.000000] virtual kernel memory layout:
fixmap : 0xfff17000 - 0xfffff000 ( 928 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
.init : 0xc18bd000 - 0xc196b000 ( 696 kB)
.data : 0xc15c0e62 - 0xc18bb180 (3048 kB)
.text : 0xc1000000 - 0xc15c0e62 (5891 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 32.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=4
[ 0.000000] NR_IRQS:2304 nr_irqs:456 16
[ 0.000000] CPU 0 irqstacks, hard=f582c000 soft=f582e000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2666.542 MHz processor
[ 0.010009] Calibrating delay loop (skipped), value calculated using timer frequency.. 5333.08 BogoMIPS (lpj=26665420)
[ 0.010253] pid_max: default: 32768 minimum: 301
[ 0.010384] ACPI: Core revision 20150930
[ 0.026030] ACPI: 1 ACPI AML tables successfully acquired and loaded
[ 0.026239] Security Framework initialized
[ 0.026362] SELinux: Initializing.
[ 0.026500] SELinux: Starting in permissive mode
[ 0.026513] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.026636] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.027024] Initializing cgroup subsys io
[ 0.027150] Initializing cgroup subsys memory
[ 0.027279] Initializing cgroup subsys devices
[ 0.027402] Initializing cgroup subsys freezer
[ 0.027527] Initializing cgroup subsys net_cls
[ 0.027650] Initializing cgroup subsys perf_event
[ 0.027791] CPU: Physical Processor ID: 0
[ 0.027913] CPU: Processor Core ID: 0
[ 0.028038] mce: CPU supports 6 MCE banks
[ 0.028165] process: using mwait in idle threads
[ 0.028294] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
[ 0.028416] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
[ 0.028744] Freeing SMP alternatives memory: 24K (c196b000 - c1971000)
[ 0.030013] ftrace: allocating 24041 entries in 47 pages
[ 0.040093] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.040573] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.150000] smpboot: CPU0: Intel(R) Core(TM)2 Quad CPU Q9400 @ 2.66GHz (family: 0x6, model: 0x17, stepping: 0xa)
[ 0.150000] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
[ 0.150000] ... version: 2
[ 0.150000] ... bit width: 40
[ 0.150000] ... generic registers: 2
[ 0.150000] ... value mask: 000000ffffffffff
[ 0.150000] ... max period: 000000007fffffff
[ 0.150000] ... fixed-purpose events: 3
[ 0.150000] ... event mask: 0000000700000003
[ 0.150000] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.150000] CPU 1 irqstacks, hard=f5a02000 soft=f5a04000
[ 0.150000] x86: Booting SMP configuration:
[ 0.150000] .... node #0, CPUs: #1
[ 0.020000] Initializing CPU#1
[ 0.150000] CPU 2 irqstacks, hard=f5a40000 soft=f5a42000
[ 0.150000] #2
[ 0.020000] Initializing CPU#2
[ 0.150000] CPU 3 irqstacks, hard=f5a7a000 soft=f5a7c000
[ 0.150000] #3
[ 0.020000] Initializing CPU#3
[ 0.150016] x86: Booted up 1 node, 4 CPUs
[ 0.150389] smpboot: Total of 4 processors activated (21332.33 BogoMIPS)
[ 0.153514] devtmpfs: initialized
[ 0.153514] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.153514] NET: Registered protocol family 16
[ 0.153514] EISA bus registered
[ 0.180004] cpuidle: using governor ladder
[ 0.200004] cpuidle: using governor menu
[ 0.200233] ACPI: bus type PCI registered
[ 0.200403] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.200614] PCI: not using MMCONFIG
[ 0.201092] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=5
[ 0.201215] PCI: Using configuration type 1 for base access
[ 0.230091] ACPI: Added _OSI(Module Device)
[ 0.230216] ACPI: Added _OSI(Processor Device)
[ 0.230338] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.230460] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.232532] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.238187] ACPI: Dynamic OEM Table Load:
[ 0.238376] ACPI: SSDT 0x00000000F5AD2000 0001C6 (v01 AMI CPU1PM 00000001 INTL 20060113)
[ 0.239085] ACPI: Dynamic OEM Table Load:
[ 0.239273] ACPI: SSDT 0x00000000F5B14E00 00013A (v01 AMI CPU2PM 00000001 INTL 20060113)
[ 0.240428] ACPI: Dynamic OEM Table Load:
[ 0.240616] ACPI: SSDT 0x00000000F5B14C00 00013A (v01 AMI CPU3PM 00000001 INTL 20060113)
[ 0.241315] ACPI: Dynamic OEM Table Load:
[ 0.241502] ACPI: SSDT 0x00000000F5B14A00 00013A (v01 AMI CPU4PM 00000001 INTL 20060113)
[ 0.242189] ACPI: Interpreter enabled
[ 0.244415] ACPI: (supports S0 S5)
[ 0.244536] ACPI: Using IOAPIC for interrupt routing
[ 0.244686] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.245371] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.245583] PCI: Using MMCONFIG for extended config space
[ 0.245711] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.252211] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.252338] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.252552] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.252813] PCI host bridge to bus 0000:00
[ 0.252937] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.253061] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.253185] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.253396] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window]
[ 0.253606] pci_bus 0000:00: root bus resource [mem 0xb0000000-0xffffffff window]
[ 0.253816] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.253946] pci 0000:00:00.0: [8086:29a0] type 00 class 0x060000
[ 0.254047] pci 0000:00:01.0: [8086:29a1] type 01 class 0x060400
[ 0.254082] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.254177] pci 0000:00:1a.0: [8086:2834] type 00 class 0x0c0300
[ 0.254213] pci 0000:00:1a.0: reg 0x20: [io 0x9880-0x989f]
[ 0.254306] pci 0000:00:1a.1: [8086:2835] type 00 class 0x0c0300
[ 0.254342] pci 0000:00:1a.1: reg 0x20: [io 0x9c00-0x9c1f]
[ 0.254440] pci 0000:00:1a.7: [8086:283a] type 00 class 0x0c0320
[ 0.254462] pci 0000:00:1a.7: reg 0x10: [mem 0xf7fffc00-0xf7ffffff]
[ 0.254524] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.254606] pci 0000:00:1b.0: [8086:284b] type 00 class 0x040300
[ 0.254629] pci 0000:00:1b.0: reg 0x10: [mem 0xf7ff8000-0xf7ffbfff 64bit]
[ 0.254682] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.254760] pci 0000:00:1c.0: [8086:283f] type 01 class 0x060400
[ 0.254820] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.254906] pci 0000:00:1c.4: [8086:2847] type 01 class 0x060400
[ 0.254966] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.255049] pci 0000:00:1c.5: [8086:2849] type 01 class 0x060400
[ 0.255109] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.255190] pci 0000:00:1d.0: [8086:2830] type 00 class 0x0c0300
[ 0.255225] pci 0000:00:1d.0: reg 0x20: [io 0x9400-0x941f]
[ 0.255318] pci 0000:00:1d.1: [8086:2831] type 00 class 0x0c0300
[ 0.255353] pci 0000:00:1d.1: reg 0x20: [io 0x9480-0x949f]
[ 0.255443] pci 0000:00:1d.2: [8086:2832] type 00 class 0x0c0300
[ 0.255479] pci 0000:00:1d.2: reg 0x20: [io 0x9800-0x981f]
[ 0.255578] pci 0000:00:1d.7: [8086:2836] type 00 class 0x0c0320
[ 0.255601] pci 0000:00:1d.7: reg 0x10: [mem 0xf7fff800-0xf7fffbff]
[ 0.255662] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.255740] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[ 0.255856] pci 0000:00:1f.0: [8086:2810] type 00 class 0x060100
[ 0.255933] pci 0000:00:1f.0: can't claim BAR 13 [io 0x0800-0x087f]: address conflict with ACPI CPU throttle [io 0x0810-0x0815]
[ 0.256149] pci 0000:00:1f.0: quirk: [io 0x0480-0x04bf] claimed by ICH6 GPIO
[ 0.256275] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003)
[ 0.256576] pci 0000:00:1f.2: [8086:2820] type 00 class 0x01018f
[ 0.256592] pci 0000:00:1f.2: reg 0x10: [io 0x8400-0x8407]
[ 0.256599] pci 0000:00:1f.2: reg 0x14: [io 0x8080-0x8083]
[ 0.256605] pci 0000:00:1f.2: reg 0x18: [io 0x8000-0x8007]
[ 0.256612] pci 0000:00:1f.2: reg 0x1c: [io 0x7c00-0x7c03]
[ 0.256619] pci 0000:00:1f.2: reg 0x20: [io 0x7880-0x788f]
[ 0.256626] pci 0000:00:1f.2: reg 0x24: [io 0x7800-0x780f]
[ 0.256647] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.256722] pci 0000:00:1f.3: [8086:283e] type 00 class 0x0c0500
[ 0.256734] pci 0000:00:1f.3: reg 0x10: [mem 0x00000000-0x000000ff]
[ 0.256757] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f]
[ 0.256843] pci 0000:00:1f.5: [8086:2825] type 00 class 0x010185
[ 0.256859] pci 0000:00:1f.5: reg 0x10: [io 0x9080-0x9087]
[ 0.256866] pci 0000:00:1f.5: reg 0x14: [io 0x9000-0x9003]
[ 0.256872] pci 0000:00:1f.5: reg 0x18: [io 0x8c00-0x8c07]
[ 0.256879] pci 0000:00:1f.5: reg 0x1c: [io 0x8880-0x8883]
[ 0.256886] pci 0000:00:1f.5: reg 0x20: [io 0x8800-0x880f]
[ 0.256893] pci 0000:00:1f.5: reg 0x24: [io 0x8480-0x848f]
[ 0.256914] pci 0000:00:1f.5: PME# supported from D3hot
[ 0.257027] pci 0000:01:00.0: [10de:1b81] type 00 class 0x030000
[ 0.257048] pci 0000:01:00.0: reg 0x10: [mem 0xf8000000-0xf8ffffff]
[ 0.257059] pci 0000:01:00.0: reg 0x14: [mem 0xb0000000-0xbfffffff 64bit pref]
[ 0.257070] pci 0000:01:00.0: reg 0x1c: [mem 0xcc000000-0xcdffffff 64bit pref]
[ 0.257078] pci 0000:01:00.0: reg 0x24: [io 0xac00-0xac7f]
[ 0.257085] pci 0000:01:00.0: reg 0x30: [mem 0xf9d00000-0xf9d7ffff pref]
[ 0.257179] pci 0000:01:00.1: [10de:10f0] type 00 class 0x040300
[ 0.257200] pci 0000:01:00.1: reg 0x10: [mem 0xf9dfc000-0xf9dfffff]
[ 0.257321] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.257445] pci 0000:00:01.0: bridge window [io 0xa000-0xafff]
[ 0.257448] pci 0000:00:01.0: bridge window [mem 0xf8000000-0xf9dfffff]
[ 0.257451] pci 0000:00:01.0: bridge window [mem 0xb0000000-0xcdffffff 64bit pref]
[ 0.257506] pci 0000:04:00.0: [10de:1b81] type 00 class 0x030000
[ 0.257533] pci 0000:04:00.0: reg 0x10: [mem 0xfa000000-0xfaffffff]
[ 0.257545] pci 0000:04:00.0: reg 0x14: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.257557] pci 0000:04:00.0: reg 0x1c: [mem 0xce000000-0xcfffffff 64bit pref]
[ 0.257565] pci 0000:04:00.0: reg 0x24: [io 0xdc00-0xdc7f]
[ 0.257573] pci 0000:04:00.0: reg 0x30: [mem 0xfbe00000-0xfbe7ffff pref]
[ 0.257690] pci 0000:04:00.1: [10de:10f0] type 00 class 0x040300
[ 0.257719] pci 0000:04:00.1: reg 0x10: [mem 0xfbefc000-0xfbefffff]
[ 0.270021] pci 0000:00:1c.0: PCI bridge to [bus 04]
[ 0.270149] pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff]
[ 0.270153] pci 0000:00:1c.0: bridge window [mem 0xfa000000-0xfbefffff]
[ 0.270159] pci 0000:00:1c.0: bridge window [mem 0xce000000-0xdfffffff 64bit pref]
[ 0.270231] pci 0000:03:00.0: [197b:2363] type 00 class 0x010185
[ 0.270328] pci 0000:03:00.0: reg 0x24: [mem 0xf9ffe000-0xf9ffffff]
[ 0.270340] pci 0000:03:00.0: reg 0x30: [mem 0xf9fe0000-0xf9feffff pref]
[ 0.270381] pci 0000:03:00.0: PME# supported from D3hot
[ 0.270447] pci 0000:03:00.1: [197b:2363] type 00 class 0x010185
[ 0.270475] pci 0000:03:00.1: reg 0x10: [io 0xcc00-0xcc07]
[ 0.270485] pci 0000:03:00.1: reg 0x14: [io 0xc880-0xc883]
[ 0.270494] pci 0000:03:00.1: reg 0x18: [io 0xc800-0xc807]
[ 0.270504] pci 0000:03:00.1: reg 0x1c: [io 0xc480-0xc483]
[ 0.270513] pci 0000:03:00.1: reg 0x20: [io 0xc400-0xc40f]
[ 0.270616] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.270835] pci 0000:00:1c.4: PCI bridge to [bus 03]
[ 0.270960] pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff]
[ 0.270963] pci 0000:00:1c.4: bridge window [mem 0xf9f00000-0xf9ffffff]
[ 0.271023] pci 0000:02:00.0: [11ab:4364] type 00 class 0x020000
[ 0.271074] pci 0000:02:00.0: reg 0x10: [mem 0xf9efc000-0xf9efffff 64bit]
[ 0.271085] pci 0000:02:00.0: reg 0x18: [io 0xb800-0xb8ff]
[ 0.271124] pci 0000:02:00.0: reg 0x30: [mem 0xf9ec0000-0xf9edffff pref]
[ 0.271168] pci 0000:02:00.0: supports D1 D2
[ 0.271170] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.290017] pci 0000:00:1c.5: PCI bridge to [bus 02]
[ 0.290145] pci 0000:00:1c.5: bridge window [io 0xb000-0xbfff]
[ 0.290149] pci 0000:00:1c.5: bridge window [mem 0xf9e00000-0xf9efffff]
[ 0.290206] pci 0000:05:03.0: [104c:8023] type 00 class 0x0c0010
[ 0.290227] pci 0000:05:03.0: reg 0x10: [mem 0xfbfff800-0xfbffffff]
[ 0.290236] pci 0000:05:03.0: reg 0x14: [mem 0xfbff8000-0xfbffbfff]
[ 0.290294] pci 0000:05:03.0: supports D1 D2
[ 0.290296] pci 0000:05:03.0: PME# supported from D0 D1 D2 D3hot
[ 0.290344] pci 0000:05:04.0: [11ab:4320] type 00 class 0x020000
[ 0.290368] pci 0000:05:04.0: reg 0x10: [mem 0xfbff4000-0xfbff7fff]
[ 0.290377] pci 0000:05:04.0: reg 0x14: [io 0xe800-0xe8ff]
[ 0.290414] pci 0000:05:04.0: reg 0x30: [mem 0xfbfc0000-0xfbfdffff pref]
[ 0.290438] pci 0000:05:04.0: supports D1 D2
[ 0.290439] pci 0000:05:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.290507] pci 0000:00:1e.0: PCI bridge to [bus 05] (subtractive decode)
[ 0.290633] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
[ 0.290636] pci 0000:00:1e.0: bridge window [mem 0xfbf00000-0xfbffffff]
[ 0.290642] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
[ 0.290644] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 0.290646] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[ 0.290649] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff window] (subtractive decode)
[ 0.290651] pci 0000:00:1e.0: bridge window [mem 0xb0000000-0xffffffff window] (subtractive decode)
[ 0.290670] pci_bus 0000:00: on NUMA node 0
[ 0.291276] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.291835] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.292391] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.292948] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 *15)
[ 0.293504] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.294212] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 *14 15)
[ 0.294768] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.295325] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[ 0.295872] ACPI: Enabled 2 GPEs in block 00 to 1F
[ 0.296106] vgaarb: setting as boot device: PCI:0000:01:00.0
[ 0.296106] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.296106] vgaarb: device added: PCI:0000:04:00.0,decodes=io+mem,owns=none,locks=none
[ 0.296106] vgaarb: loaded
[ 0.296106] vgaarb: bridge control possible 0000:04:00.0
[ 0.296106] vgaarb: bridge control possible 0000:01:00.0
[ 0.296106] SCSI subsystem initialized
[ 0.296106] libata version 3.00 loaded.
[ 0.296106] ACPI: bus type USB registered
[ 0.296106] usbcore: registered new interface driver usbfs
[ 0.296106] usbcore: registered new interface driver hub
[ 0.296106] usbcore: registered new device driver usb
[ 0.296106] PCI: Using ACPI for IRQ routing
[ 0.296106] PCI: pci_cache_line_size set to 64 bytes
[ 0.296106] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.296106] e820: reserve RAM buffer [mem 0xaff90000-0xafffffff]
[ 0.296106] NetLabel: Initializing
[ 0.296106] NetLabel: domain hash size = 128
[ 0.296106] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.296106] NetLabel: unlabeled traffic allowed by default
[ 0.296106] clocksource: Switched to clocksource refined-jiffies
[ 0.310101] pnp: PnP ACPI init
[ 0.310347] system 00:00: [mem 0xfed14000-0xfed19fff] has been reserved
[ 0.310473] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.310556] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.310786] pnp 00:02: [dma 0 disabled]
[ 0.310843] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.311011] system 00:03: [io 0x0290-0x0297] has been reserved
[ 0.311136] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.311299] system 00:04: [io 0x04d0-0x04d1] has been reserved
[ 0.311423] system 00:04: [io 0x0800-0x087f] could not be reserved
[ 0.311547] system 00:04: [io 0x0480-0x04bf] has been reserved
[ 0.311671] system 00:04: [mem 0xffafe000-0xffb0cbff] could not be reserved
[ 0.311796] system 00:04: [mem 0xffb00000-0xffbfffff] has been reserved
[ 0.311919] system 00:04: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.312043] system 00:04: [mem 0xfed20000-0xfed8ffff] has been reserved
[ 0.312167] system 00:04: [mem 0xfff00000-0xfffffffe] has been reserved
[ 0.312291] system 00:04: [mem 0xfebfe000-0xfebfec00] has been reserved
[ 0.312415] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.312530] system 00:05: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.312655] system 00:05: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.312780] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.312880] system 00:06: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.313005] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.313193] system 00:07: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.313318] system 00:07: [mem 0x000c0000-0x000cffff] could not be reserved
[ 0.313442] system 00:07: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.313565] system 00:07: [mem 0x00100000-0xafffffff] could not be reserved
[ 0.313689] system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.313819] pnp: PnP ACPI: found 8 devices
[ 0.351141] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.351378] clocksource: Switched to clocksource acpi_pm
[ 0.351530] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 add_align 100000
[ 0.351537] pci 0000:00:1c.5: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000
[ 0.351547] pci 0000:00:1f.0: BAR 13: [io size 0x0080] has bogus alignment
[ 0.351672] pci 0000:00:1c.4: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[ 0.351675] pci 0000:00:1c.4: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[ 0.351678] pci 0000:00:1c.5: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[ 0.351680] pci 0000:00:1c.5: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[ 0.351687] pci 0000:00:1c.4: BAR 15: assigned [mem 0xf0000000-0xf01fffff 64bit pref]
[ 0.351900] pci 0000:00:1c.5: BAR 15: assigned [mem 0xf0200000-0xf03fffff 64bit pref]
[ 0.352111] pci 0000:00:1f.3: BAR 0: assigned [mem 0xf0400000-0xf04000ff]
[ 0.352237] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.352361] pci 0000:00:01.0: bridge window [io 0xa000-0xafff]
[ 0.352485] pci 0000:00:01.0: bridge window [mem 0xf8000000-0xf9dfffff]
[ 0.352610] pci 0000:00:01.0: bridge window [mem 0xb0000000-0xcdffffff 64bit pref]
[ 0.352823] pci 0000:00:1c.0: PCI bridge to [bus 04]
[ 0.352950] pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff]
[ 0.353075] pci 0000:00:1c.0: bridge window [mem 0xfa000000-0xfbefffff]
[ 0.353200] pci 0000:00:1c.0: bridge window [mem 0xce000000-0xdfffffff 64bit pref]
[ 0.353413] pci 0000:00:1c.4: PCI bridge to [bus 03]
[ 0.353536] pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff]
[ 0.353661] pci 0000:00:1c.4: bridge window [mem 0xf9f00000-0xf9ffffff]
[ 0.353785] pci 0000:00:1c.4: bridge window [mem 0xf0000000-0xf01fffff 64bit pref]
[ 0.353999] pci 0000:00:1c.5: PCI bridge to [bus 02]
[ 0.354123] pci 0000:00:1c.5: bridge window [io 0xb000-0xbfff]
[ 0.354248] pci 0000:00:1c.5: bridge window [mem 0xf9e00000-0xf9efffff]
[ 0.354373] pci 0000:00:1c.5: bridge window [mem 0xf0200000-0xf03fffff 64bit pref]
[ 0.354588] pci 0000:00:1e.0: PCI bridge to [bus 05]
[ 0.354711] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
[ 0.354836] pci 0000:00:1e.0: bridge window [mem 0xfbf00000-0xfbffffff]
[ 0.354965] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.354967] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.354969] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.354971] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window]
[ 0.354973] pci_bus 0000:00: resource 8 [mem 0xb0000000-0xffffffff window]
[ 0.354975] pci_bus 0000:01: resource 0 [io 0xa000-0xafff]
[ 0.354977] pci_bus 0000:01: resource 1 [mem 0xf8000000-0xf9dfffff]
[ 0.354979] pci_bus 0000:01: resource 2 [mem 0xb0000000-0xcdffffff 64bit pref]
[ 0.354982] pci_bus 0000:04: resource 0 [io 0xd000-0xdfff]
[ 0.354984] pci_bus 0000:04: resource 1 [mem 0xfa000000-0xfbefffff]
[ 0.354986] pci_bus 0000:04: resource 2 [mem 0xce000000-0xdfffffff 64bit pref]
[ 0.354988] pci_bus 0000:03: resource 0 [io 0xc000-0xcfff]
[ 0.354990] pci_bus 0000:03: resource 1 [mem 0xf9f00000-0xf9ffffff]
[ 0.354992] pci_bus 0000:03: resource 2 [mem 0xf0000000-0xf01fffff 64bit pref]
[ 0.354994] pci_bus 0000:02: resource 0 [io 0xb000-0xbfff]
[ 0.354996] pci_bus 0000:02: resource 1 [mem 0xf9e00000-0xf9efffff]
[ 0.354998] pci_bus 0000:02: resource 2 [mem 0xf0200000-0xf03fffff 64bit pref]
[ 0.355000] pci_bus 0000:05: resource 0 [io 0xe000-0xefff]
[ 0.355002] pci_bus 0000:05: resource 1 [mem 0xfbf00000-0xfbffffff]
[ 0.355004] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7 window]
[ 0.355006] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff window]
[ 0.355008] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.355010] pci_bus 0000:05: resource 7 [mem 0x000d0000-0x000dffff window]
[ 0.355012] pci_bus 0000:05: resource 8 [mem 0xb0000000-0xffffffff window]
[ 0.355105] NET: Registered protocol family 2
[ 0.355485] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.355649] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.355821] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.355985] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.356123] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.356360] NET: Registered protocol family 1
[ 0.356653] pci 0000:01:00.0: Video device with shadowed ROM
[ 0.356679] pci 0000:03:00.0: async suspend disabled to avoid multi-function power-on ordering issue
[ 0.356893] pci 0000:03:00.1: async suspend disabled to avoid multi-function power-on ordering issue
[ 0.357112] PCI: CLS 32 bytes, default 64
[ 0.357540] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.357745] audit: initializing netlink subsys (disabled)
[ 0.357881] audit: type=2000 audit(1473843918.350:1): initialized
[ 0.358179] Initialise system trusted keyring
[ 0.358338] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.358338] VFS: Disk quotas dquot_6.6.0
[ 0.358338] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.358338] SELinux: Registering netfilter hooks
[ 0.359051] Key type asymmetric registered
[ 0.359175] Asymmetric key parser 'x509' registered
[ 0.359314] bounce: pool size: 64 pages
[ 0.359467] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[ 0.359762] io scheduler noop registered
[ 0.359885] io scheduler deadline registered
[ 0.360047] io scheduler cfq registered (default)
[ 0.361109] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.381721] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.382411] Linux agpgart interface v0.103
[ 0.382664] intel_idle: does not run on family 6 model 23
[ 0.382674] ipmi message handler version 39.2
[ 0.382809] IPMI System Interface driver.
[ 0.382956] ipmi_si: Unable to find any System Interface(s)
[ 0.383574] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.383787] ACPI: Power Button [PWRB]
[ 0.383952] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.384164] ACPI: Power Button [PWRF]
[ 0.384562] GHES: HEST is not enabled!
[ 0.388304] brd: module loaded
[ 0.390462] loop: module loaded
[ 0.390699] ahci 0000:03:00.0: version 3.0
[ 0.410053] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[ 0.410281] ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part
[ 0.410778] scsi host0: ahci
[ 0.411067] scsi host1: ahci
[ 0.411256] ata1: SATA max UDMA/133 abar m8192@0xf9ffe000 port 0xf9ffe100 irq 16
[ 0.411469] ata2: SATA max UDMA/133 abar m8192@0xf9ffe000 port 0xf9ffe180 irq 16
[ 0.411812] ata_piix 0000:00:1f.2: version 2.13
[ 0.411823] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 0.413497] scsi host2: ata_piix
[ 0.413750] scsi host3: ata_piix
[ 0.413925] ata3: SATA max UDMA/133 cmd 0x8400 ctl 0x8080 bmdma 0x7880 irq 19
[ 0.414051] ata4: SATA max UDMA/133 cmd 0x8000 ctl 0x7c00 bmdma 0x7888 irq 19
[ 0.414258] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 0.415386] scsi host4: ata_piix
[ 0.415694] scsi host5: ata_piix
[ 0.415868] ata5: SATA max UDMA/133 cmd 0x9080 ctl 0x9000 bmdma 0x8800 irq 19
[ 0.415992] ata6: SATA max UDMA/133 cmd 0x8c00 ctl 0x8880 bmdma 0x8808 irq 19
[ 0.416229] pata_jmicron 0000:03:00.1: enabling device (0000 -> 0001)
[ 0.417148] scsi host6: pata_jmicron
[ 0.417449] scsi host7: pata_jmicron
[ 0.419722] ata7: PATA max UDMA/100 cmd 0xcc00 ctl 0xc880 bmdma 0xc400 irq 17
[ 0.419845] ata8: PATA max UDMA/100 cmd 0xc800 ctl 0xc480 bmdma 0xc408 irq 17
[ 0.420205] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.420338] ehci-pci: EHCI PCI platform driver
[ 0.420567] ehci-pci 0000:00:1a.7: EHCI Host Controller
[ 0.420734] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 0.420954] ehci-pci 0000:00:1a.7: debug port 1
[ 0.424980] ehci-pci 0000:00:1a.7: cache line size of 32 is not supported
[ 0.424990] ehci-pci 0000:00:1a.7: irq 18, io mem 0xf7fffc00
[ 0.440021] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 0.440201] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.440325] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.440536] usb usb1: Product: EHCI Host Controller
[ 0.440658] usb usb1: Manufacturer: Linux 4.4.6-gentoo ehci_hcd
[ 0.440782] usb usb1: SerialNumber: 0000:00:1a.7
[ 0.441023] hub 1-0:1.0: USB hub found
[ 0.441151] hub 1-0:1.0: 4 ports detected
[ 0.441503] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 0.441672] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 0.441890] ehci-pci 0000:00:1d.7: debug port 1
[ 0.445915] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
[ 0.445926] ehci-pci 0000:00:1d.7: irq 23, io mem 0xf7fff800
[ 0.460032] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.460212] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.460337] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.460547] usb usb2: Product: EHCI Host Controller
[ 0.460669] usb usb2: Manufacturer: Linux 4.4.6-gentoo ehci_hcd
[ 0.460792] usb usb2: SerialNumber: 0000:00:1d.7
[ 0.461018] hub 2-0:1.0: USB hub found
[ 0.461146] hub 2-0:1.0: 6 ports detected
[ 0.461419] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.461546] ohci-pci: OHCI PCI platform driver
[ 0.461682] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.461882] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 0.462048] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 0.462263] uhci_hcd 0000:00:1a.0: detected 2 ports
[ 0.462401] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00009880
[ 0.462568] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.462693] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.462904] usb usb3: Product: UHCI Host Controller
[ 0.463026] usb usb3: Manufacturer: Linux 4.4.6-gentoo uhci_hcd
[ 0.463149] usb usb3: SerialNumber: 0000:00:1a.0
[ 0.463372] hub 3-0:1.0: USB hub found
[ 0.463498] hub 3-0:1.0: 2 ports detected
[ 0.463779] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 0.463947] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 0.464162] uhci_hcd 0000:00:1a.1: detected 2 ports
[ 0.464299] uhci_hcd 0000:00:1a.1: irq 17, io base 0x00009c00
[ 0.464463] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.464587] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.464796] usb usb4: Product: UHCI Host Controller
[ 0.464918] usb usb4: Manufacturer: Linux 4.4.6-gentoo uhci_hcd
[ 0.465041] usb usb4: SerialNumber: 0000:00:1a.1
[ 0.465264] hub 4-0:1.0: USB hub found
[ 0.465391] hub 4-0:1.0: 2 ports detected
[ 0.465670] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.465838] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[ 0.466053] uhci_hcd 0000:00:1d.0: detected 2 ports
[ 0.466190] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00009400
[ 0.466353] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.466477] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.466688] usb usb5: Product: UHCI Host Controller
[ 0.466811] usb usb5: Manufacturer: Linux 4.4.6-gentoo uhci_hcd
[ 0.466934] usb usb5: SerialNumber: 0000:00:1d.0
[ 0.467154] hub 5-0:1.0: USB hub found
[ 0.467281] hub 5-0:1.0: 2 ports detected
[ 0.467557] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.467723] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[ 0.467937] uhci_hcd 0000:00:1d.1: detected 2 ports
[ 0.468074] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00009480
[ 0.468239] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.468363] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.468573] usb usb6: Product: UHCI Host Controller
[ 0.468695] usb usb6: Manufacturer: Linux 4.4.6-gentoo uhci_hcd
[ 0.468817] usb usb6: SerialNumber: 0000:00:1d.1
[ 0.469040] hub 6-0:1.0: USB hub found
[ 0.469167] hub 6-0:1.0: 2 ports detected
[ 0.469445] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.469610] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[ 0.469826] uhci_hcd 0000:00:1d.2: detected 2 ports
[ 0.469963] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00009800
[ 0.470157] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.470281] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.470492] usb usb7: Product: UHCI Host Controller
[ 0.470615] usb usb7: Manufacturer: Linux 4.4.6-gentoo uhci_hcd
[ 0.470738] usb usb7: SerialNumber: 0000:00:1d.2
[ 0.470959] hub 7-0:1.0: USB hub found
[ 0.471086] hub 7-0:1.0: 2 ports detected
[ 0.471346] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 0.474297] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.474423] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.474649] mousedev: PS/2 mouse device common for all mice
[ 0.474972] rtc_cmos 00:01: RTC can wake from S4
[ 0.475216] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 0.475357] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram
[ 0.475507] platform eisa.0: Probing EISA bus 0
[ 0.475631] platform eisa.0: EISA: Cannot allocate resource for mainboard
[ 0.475786] hidraw: raw HID events driver (C) Jiri Kosina
[ 0.476033] usbcore: registered new interface driver usbhid
[ 0.476156] usbhid: USB HID core driver
[ 0.476312] drop_monitor: Initializing network drop monitor service
[ 0.476533] Initializing XFRM netlink socket
[ 0.476761] NET: Registered protocol family 10
[ 0.477171] NET: Registered protocol family 17
[ 0.477533] Using IPI No-Shortcut mode
[ 0.477815] registered taskstats version 1
[ 0.477949] Loading compiled-in X.509 certificates
[ 0.481421] Loaded X.509 cert 'Build time autogenerated kernel key: c7f32cf5e3974ba1fdd89ee5a02dbab43d526562'
[ 0.481652] ima: No TPM chip found, activating TPM-bypass!
[ 0.482276] rtc_cmos 00:01: setting system clock to 2016-09-14 09:05:19 UTC (1473843919)
[ 0.760064] ata2: SATA link down (SStatus 0 SControl 300)
[ 0.760238] ata1: SATA link down (SStatus 0 SControl 300)
[ 0.770884] ata6: SATA link down (SStatus 0 SControl 300)
[ 0.920057] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 0.940258] ata5.00: ATA-9: WDC WD30EFRX-68EUZN0, 82.00A82, max UDMA/133
[ 0.940385] ata5.00: 5860533168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 0.960253] ata5.00: configured for UDMA/133
[ 1.270073] ata4.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.270207] ata4.01: SATA link down (SStatus 0 SControl 300)
[ 1.270439] ata3.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.270572] ata3.01: SATA link down (SStatus 0 SControl 300)
[ 1.271048] ata4.00: ATA-9: WDC WD30EFRX-68EUZN0, 82.00A82, max UDMA/133
[ 1.271176] ata4.00: 5860533168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.290390] ata4.00: configured for UDMA/133
[ 1.290524] ata3.00: ATA-8: WDC WD5000AAKS-00V1A0, 05.01D05, max UDMA/133
[ 1.290654] ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.330276] ata3.00: configured for UDMA/133
[ 1.330610] scsi 2:0:0:0: Direct-Access ATA WDC WD5000AAKS-0 1D05 PQ: 0 ANSI: 5
[ 1.331097] sd 2:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[ 1.331436] sd 2:0:0:0: [sda] Write Protect is off
[ 1.331475] scsi 3:0:0:0: Direct-Access ATA WDC WD30EFRX-68E 0A82 PQ: 0 ANSI: 5
[ 1.331683] sd 3:0:0:0: [sdb] 5860533168 512-byte logical blocks: (3.00 TB/2.73 TiB)
[ 1.331685] sd 3:0:0:0: [sdb] 4096-byte physical blocks
[ 1.331806] sd 3:0:0:0: [sdb] Write Protect is off
[ 1.331809] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.331852] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.331900] scsi 4:0:0:0: Direct-Access ATA WDC WD30EFRX-68E 0A82 PQ: 0 ANSI: 5
[ 1.332186] sd 4:0:0:0: [sdc] 5860533168 512-byte logical blocks: (3.00 TB/2.73 TiB)
[ 1.332188] sd 4:0:0:0: [sdc] 4096-byte physical blocks
[ 1.332257] sd 4:0:0:0: [sdc] Write Protect is off
[ 1.332260] sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 1.332289] sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.333554] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.333604] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.340030] tsc: Refined TSC clocksource calibration: 2666.666 MHz
[ 1.340162] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x26703cd6786, max_idle_ns: 440795256025 ns
[ 1.378483] sdc: sdc1
[ 1.378952] sd 4:0:0:0: [sdc] Attached SCSI disk
[ 1.384766] sdb: sdb1
[ 1.385185] sd 3:0:0:0: [sdb] Attached SCSI disk
[ 1.391731] sda: sda1 sda2 < sda5 sda6 >
[ 1.392301] sd 2:0:0:0: [sda] Attached SCSI disk
[ 1.501493] md: Waiting for all devices to be available before autodetect
[ 1.501619] md: If you don't use raid, use raid=noautodetect
[ 1.502015] md: Autodetecting RAID arrays.
[ 1.502140] md: Scanned 0 and added 0 devices.
[ 1.502263] md: autorun ...
[ 1.502385] md: ... autorun DONE.
[ 1.525873] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[ 1.528222] VFS: Mounted root (ext4 filesystem) readonly on device 8:6.
[ 1.564597] devtmpfs: mounted
[ 1.565008] Freeing unused kernel memory: 696K (c18bd000 - c196b000)
[ 1.565203] Write protecting the kernel text: 5892k
[ 1.565367] Write protecting the kernel read-only data: 2384k
[ 2.340092] clocksource: Switched to clocksource tsc
[ 4.268283] udevd[377]: starting version 3.1.5
[ 4.438776] random: udevd urandom read with 81 bits of entropy available
[ 5.515441] skge: 1.14 addr 0xfbff4000 irq 19 chip Yukon-Lite rev 9
[ 5.515668] skge 0000:05:04.0 eth0: addr 00:18:f3:fe:1d:71
[ 5.525828] sky2: driver version 1.30
[ 5.525926] sky2 0000:02:00.0: Yukon-2 EC Ultra chip revision 2
[ 5.526271] sky2 0000:02:00.0 eth1: addr 00:18:f3:fe:2d:0b
[ 5.595520] i801_smbus 0000:00:1f.3: enabling device (0001 -> 0003)
[ 5.595528] ACPI Warning: SystemIO range 0x0000000000000400-0x000000000000041F conflicts with OpRegion 0x0000000000000400-0x000000000000040F (\SMRG) (20150930/utaddress-254)
[ 5.595534] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 5.781820] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 5.830066] firewire_ohci 0000:05:03.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2
[ 5.842781] random: nonblocking pool is initialized
[ 5.845540] md: bind<sdc1>
[ 5.846885] md: bind<sdb1>
[ 5.880346] md: raid1 personality registered for level 1
[ 5.880649] md/raid1:md127: not clean -- starting background reconstruction
[ 5.880653] md/raid1:md127: active with 2 out of 2 mirrors
[ 5.880778] created bitmap (22 pages) for device md127
[ 5.884619] md127: bitmap initialized from disk: read 2 pages, set 40374 of 44711 bits
[ 5.911794] md127: detected capacity change from 0 to 3000457232384
[ 6.032901] iTCO_vendor_support: vendor-support=0
[ 6.187887] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 6.187924] iTCO_wdt: Found a ICH8 or ICH8R TCO device (Version=2, TCOBASE=0x0860)
[ 6.188064] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 6.330150] firewire_core 0000:05:03.0: created device fw0: GUID 0011d8000109dabf, S400
[ 6.561007] Error: Driver 'pcspkr' is already registered, aborting...
[ 6.661176] snd_hda_intel 0000:01:00.1: Disabling MSI
[ 6.661283] snd_hda_intel 0000:04:00.1: Disabling MSI
[ 6.710326] [drm] Initialized drm 1.1.0 20060810
[ 6.999905] nvidia: module license 'NVIDIA' taints kernel.
[ 6.999906] nvidia: module license 'NVIDIA' taints kernel.
[ 6.999910] Disabling lock debugging due to kernel taint
[ 7.035848] nvidia: module verification failed: signature and/or required key missing - tainting kernel
[ 7.043522] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 7.043740] nvidia 0000:04:00.0: enabling device (0000 -> 0003)
[ 7.043756] vgaarb: device changed decodes: PCI:0000:04:00.0,olddecodes=io+mem,decodes=none:owns=none
[ 7.043959] nvidia-nvlink: Nvlink Core is being initialized, major device number 247
[ 7.043979] NVRM: loading NVIDIA UNIX x86 Kernel Module 370.28 Thu Sep 1 18:48:42 PDT 2016
[ 7.179801] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 370.28 Thu Sep 1 19:01:23 PDT 2016
[ 7.196530] [drm] [nvidia-drm] [GPU ID 0x00000100] Loading driver
[ 7.196626] [drm] [nvidia-drm] [GPU ID 0x00000400] Loading driver
[ 7.220205] snd_hda_codec_analog hdaudioC0D0: autoconfig for AD1988B: line_outs=4 (0x12/0x16/0x24/0x25/0x0) type:line
[ 7.220210] snd_hda_codec_analog hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 7.220212] snd_hda_codec_analog hdaudioC0D0: hp_outs=1 (0x11/0x0/0x0/0x0/0x0)
[ 7.220214] snd_hda_codec_analog hdaudioC0D0: mono: mono_out=0x0
[ 7.220216] snd_hda_codec_analog hdaudioC0D0: dig-out=0x1b/0x0
[ 7.220218] snd_hda_codec_analog hdaudioC0D0: inputs:
[ 7.220220] snd_hda_codec_analog hdaudioC0D0: Front Mic=0x14
[ 7.220222] snd_hda_codec_analog hdaudioC0D0: Rear Mic=0x17
[ 7.220224] snd_hda_codec_analog hdaudioC0D0: Line=0x15
[ 7.220226] snd_hda_codec_analog hdaudioC0D0: Line=0x1a
[ 7.220228] snd_hda_codec_analog hdaudioC0D0: CD=0x18
[ 7.234550] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[ 7.235484] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 7.235569] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 7.235657] input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 7.235739] input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 7.235826] input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 7.235918] input: HDA Intel Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 8.500042] floppy0: no floppy controllers found
[ 8.864017] vmap allocation for size 16781312 failed: use vmalloc=<size> to increase size.
[ 8.867601] NVRM: RmInitAdapter failed! (0x25:0xffff:1050)
[ 8.867632] NVRM: rm_init_adapter failed for device bearing minor number 1
[ 8.950933] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input17
[ 8.951283] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1c.0/0000:04:00.1/sound/card2/input13
[ 8.951349] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input18
[ 8.951448] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input19
[ 8.951543] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input20
[ 8.951699] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1c.0/0000:04:00.1/sound/card2/input14
[ 8.951803] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1c.0/0000:04:00.1/sound/card2/input15
[ 8.951927] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1c.0/0000:04:00.1/sound/card2/input16
[ 11.643522] EXT4-fs (sda6): re-mounted. Opts: (null)
[ 12.586177] Adding 8388604k swap on /dev/sda5. Priority:-1 extents:1 across:8388604k
[ 16.885380] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 16.885453] skge 0000:05:04.0 eth0: enabling interface
[ 16.888630] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 16.901446] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 16.904480] sky2 0000:02:00.0 eth1: enabling interface
[ 16.904555] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 19.292679] skge 0000:05:04.0 eth0: Link is up at 1000 Mbps, full duplex, flow control none
[ 19.292699] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 19.781146] vmap allocation for size 16781312 failed: use vmalloc=<size> to increase size.
[ 19.784857] NVRM: RmInitAdapter failed! (0x25:0xffff:1050)
[ 19.784884] NVRM: rm_init_adapter failed for device bearing minor number 1
[ 19.790828] NVRM: Persistence mode is deprecated and will be removed in a future release. Please use nvidia-persistenced instead.
Posts: 5,185
Threads: 230
Joined: Apr 2010
Posts: 30
Threads: 8
Joined: May 2016
That tool is not existing on the machine ;-)
-> However the vmalloc kernel setting to 256M solved the issue.
I guess I have to go 64 bits from now (and buy a bigger power supply)
|
