Looking for the best setup for 500kh/s or 1000kh/s on WPA/WPA2
#10
(07-30-2015, 02:57 PM)soxrok2212 Wrote:
(07-30-2015, 03:09 AM)Flomac Wrote: 5x GTX 970 and a 1kw PSU is not a very clever idea for many reasons. The PSU will always operates at its limit. That's bad for a) life endurance, b) noise, c) power costs and d) stability. A PSU works effectiv in the range auf roughly 25-75% use. Under and above that it loses a few percentages power effiecency. If you let your system run a lot like 24/7 even 1% difference shows off later on your power bill. It depends on the PSU, a gold or better is taken for granted.

Stability is even more important. If a PSU runs at its limits nasty effects can occur and for the worst it might shut down some of your GPUs forever by an internal shortcut.

Buy a 1500W instead.

But what if I'm only running 3?


3x 150W with 100W other think all isĀ  550-600W then 1KW PSU is ok for that without problem.


Messages In This Thread
RE: Looking for the best setup for 500kh/s or 1000kh/s on WPA/WPA2 - by wgmmmx - 07-30-2015, 05:22 PM