10-04-2016, 08:09 PM
So, uninstalled the drivers for all graphics adapters and installed fresh copies from nVidia..
Funny thing is I'm using dual 850w 42+Amp PSUs here so loads of power handy.. Now with the fresh drivers, I'm not getting a single bean out of anything where as the older drivers worked fine at least for running a single GTX570 card when using them alone, using both GTX570 cards would instantly turn off the machine.. Running the GTX660oc model would always give me the same error..
But now, I get this regardless of card and regardless of which was I run them.
C:\Users\didge\Downloads\hashcat-3.10>hashcat64.exe -a 3 -m 100 --session=all -o "C:\Users\didge\Desktop\HashcatGUI_050b1\tmpF454_
found100.txt" --outfile-format=3 -w 2 --gpu-temp-abort=80 -1 ?l?d "C:\Users\didge\AppData\Local\Temp\tmpF454.tmp" ?1?1?1?1?1?1?1?1
hashcat (v3.10) starting...
OpenCL Platform #1: NVIDIA Corporation
======================================
- Device #1: GeForce GTX 570, 320/1280 MB allocatable, 15MCU
- Device #2: GeForce GTX 570, 320/1280 MB allocatable, 15MCU
- Device #3: GeForce GTX 660, 512/2048 MB allocatable, 5MCU
Hashes: 1 hashes; 1 unique digests, 1 unique salts
Bitmaps: 16 bits, 65536 entries, 0x0000ffff mask, 262144 bytes, 5/13 rotates
Applicable Optimizers:
* Zero-Byte
* Precompute-Init
* Precompute-Merkle-Demgard
* Early-Skip
* Not-Salted
* Not-Iterated
* Single-Hash
* Single-Salt
* Brute-Force
* Raw-Hash
Watchdog: Temperature abort trigger set to 80c
Watchdog: Temperature retain trigger set to 75c
Initializing device kernels and memory...
ERROR: clBuildProgram(): CL_INVALID_BINARY
C:\Users\didge\Downloads\hashcat-3.10>hashcat64.exe -a 3 -m 100 --session=1 -o "C:\Users\didge\Desktop\HashcatGUI_050b1\tmp85E5_fo
und100.txt" --outfile-format=3 -w 2 --gpu-temp-abort=80 -d 1 -1 ?l?d "C:\Users\didge\AppData\Local\Temp\tmp85E5.tmp" ?1?1?1?1?1?1?1
?1
hashcat (v3.10) starting...
OpenCL Platform #1: NVIDIA Corporation
======================================
- Device #1: GeForce GTX 570, 320/1280 MB allocatable, 15MCU
- Device #2: GeForce GTX 570, skipped
- Device #3: GeForce GTX 660, skipped
Hashes: 1 hashes; 1 unique digests, 1 unique salts
Bitmaps: 16 bits, 65536 entries, 0x0000ffff mask, 262144 bytes, 5/13 rotates
Applicable Optimizers:
* Zero-Byte
* Precompute-Init
* Precompute-Merkle-Demgard
* Early-Skip
* Not-Salted
* Not-Iterated
* Single-Hash
* Single-Salt
* Brute-Force
* Raw-Hash
Watchdog: Temperature abort trigger set to 80c
Watchdog: Temperature retain trigger set to 75c
Initializing device kernels and memory...
ERROR: clBuildProgram(): CL_INVALID_BINARY
C:\Users\didge\Downloads\hashcat-3.10>hashcat64.exe -a 3 -m 100 --session=2 -o "C:\Users\didge\Desktop\HashcatGUI_050b1\tmp85E5_fo
und100.txt" --outfile-format=3 -w 2 --gpu-temp-abort=80 -d 2 -1 ?l?d "C:\Users\didge\AppData\Local\Temp\tmp85E5.tmp" ?1?1?1?1?1?1?1
?1
hashcat (v3.10) starting...
OpenCL Platform #1: NVIDIA Corporation
======================================
- Device #1: GeForce GTX 570, skipped
- Device #2: GeForce GTX 570, 320/1280 MB allocatable, 15MCU
- Device #3: GeForce GTX 660, skipped
Hashes: 1 hashes; 1 unique digests, 1 unique salts
Bitmaps: 16 bits, 65536 entries, 0x0000ffff mask, 262144 bytes, 5/13 rotates
Applicable Optimizers:
* Zero-Byte
* Precompute-Init
* Precompute-Merkle-Demgard
* Early-Skip
* Not-Salted
* Not-Iterated
* Single-Hash
* Single-Salt
* Brute-Force
* Raw-Hash
Watchdog: Temperature abort trigger set to 80c
Watchdog: Temperature retain trigger set to 75c
Initializing device kernels and memory...
ERROR: clBuildProgram(): CL_INVALID_BINARY
C:\Users\didge\Downloads\hashcat-3.10>hashcat64.exe -a 3 -m 100 --session=3 -o "C:\Users\didge\Desktop\HashcatGUI_050b1\tmp85E5_fo
und100.txt" --outfile-format=3 -w 2 --gpu-temp-abort=80 -d 3 -1 ?l?d "C:\Users\didge\AppData\Local\Temp\tmp85E5.tmp" ?1?1?1?1?1?1?1
?1
hashcat (v3.10) starting...
OpenCL Platform #1: NVIDIA Corporation
======================================
- Device #1: GeForce GTX 570, skipped
- Device #2: GeForce GTX 570, skipped
- Device #3: GeForce GTX 660, 512/2048 MB allocatable, 5MCU
Hashes: 1 hashes; 1 unique digests, 1 unique salts
Bitmaps: 16 bits, 65536 entries, 0x0000ffff mask, 262144 bytes, 5/13 rotates
Applicable Optimizers:
* Zero-Byte
* Precompute-Init
* Precompute-Merkle-Demgard
* Early-Skip
* Not-Salted
* Not-Iterated
* Single-Hash
* Single-Salt
* Brute-Force
* Raw-Hash
Watchdog: Temperature abort trigger set to 80c
Watchdog: Temperature retain trigger set to 75c
Initializing device kernels and memory...
ERROR: clBuildProgram(): CL_INVALID_BINARY
C:\Users\didge\Downloads\hashcat-3.10>
Funny thing is I'm using dual 850w 42+Amp PSUs here so loads of power handy.. Now with the fresh drivers, I'm not getting a single bean out of anything where as the older drivers worked fine at least for running a single GTX570 card when using them alone, using both GTX570 cards would instantly turn off the machine.. Running the GTX660oc model would always give me the same error..
But now, I get this regardless of card and regardless of which was I run them.
C:\Users\didge\Downloads\hashcat-3.10>hashcat64.exe -a 3 -m 100 --session=all -o "C:\Users\didge\Desktop\HashcatGUI_050b1\tmpF454_
found100.txt" --outfile-format=3 -w 2 --gpu-temp-abort=80 -1 ?l?d "C:\Users\didge\AppData\Local\Temp\tmpF454.tmp" ?1?1?1?1?1?1?1?1
hashcat (v3.10) starting...
OpenCL Platform #1: NVIDIA Corporation
======================================
- Device #1: GeForce GTX 570, 320/1280 MB allocatable, 15MCU
- Device #2: GeForce GTX 570, 320/1280 MB allocatable, 15MCU
- Device #3: GeForce GTX 660, 512/2048 MB allocatable, 5MCU
Hashes: 1 hashes; 1 unique digests, 1 unique salts
Bitmaps: 16 bits, 65536 entries, 0x0000ffff mask, 262144 bytes, 5/13 rotates
Applicable Optimizers:
* Zero-Byte
* Precompute-Init
* Precompute-Merkle-Demgard
* Early-Skip
* Not-Salted
* Not-Iterated
* Single-Hash
* Single-Salt
* Brute-Force
* Raw-Hash
Watchdog: Temperature abort trigger set to 80c
Watchdog: Temperature retain trigger set to 75c
Initializing device kernels and memory...
ERROR: clBuildProgram(): CL_INVALID_BINARY
C:\Users\didge\Downloads\hashcat-3.10>hashcat64.exe -a 3 -m 100 --session=1 -o "C:\Users\didge\Desktop\HashcatGUI_050b1\tmp85E5_fo
und100.txt" --outfile-format=3 -w 2 --gpu-temp-abort=80 -d 1 -1 ?l?d "C:\Users\didge\AppData\Local\Temp\tmp85E5.tmp" ?1?1?1?1?1?1?1
?1
hashcat (v3.10) starting...
OpenCL Platform #1: NVIDIA Corporation
======================================
- Device #1: GeForce GTX 570, 320/1280 MB allocatable, 15MCU
- Device #2: GeForce GTX 570, skipped
- Device #3: GeForce GTX 660, skipped
Hashes: 1 hashes; 1 unique digests, 1 unique salts
Bitmaps: 16 bits, 65536 entries, 0x0000ffff mask, 262144 bytes, 5/13 rotates
Applicable Optimizers:
* Zero-Byte
* Precompute-Init
* Precompute-Merkle-Demgard
* Early-Skip
* Not-Salted
* Not-Iterated
* Single-Hash
* Single-Salt
* Brute-Force
* Raw-Hash
Watchdog: Temperature abort trigger set to 80c
Watchdog: Temperature retain trigger set to 75c
Initializing device kernels and memory...
ERROR: clBuildProgram(): CL_INVALID_BINARY
C:\Users\didge\Downloads\hashcat-3.10>hashcat64.exe -a 3 -m 100 --session=2 -o "C:\Users\didge\Desktop\HashcatGUI_050b1\tmp85E5_fo
und100.txt" --outfile-format=3 -w 2 --gpu-temp-abort=80 -d 2 -1 ?l?d "C:\Users\didge\AppData\Local\Temp\tmp85E5.tmp" ?1?1?1?1?1?1?1
?1
hashcat (v3.10) starting...
OpenCL Platform #1: NVIDIA Corporation
======================================
- Device #1: GeForce GTX 570, skipped
- Device #2: GeForce GTX 570, 320/1280 MB allocatable, 15MCU
- Device #3: GeForce GTX 660, skipped
Hashes: 1 hashes; 1 unique digests, 1 unique salts
Bitmaps: 16 bits, 65536 entries, 0x0000ffff mask, 262144 bytes, 5/13 rotates
Applicable Optimizers:
* Zero-Byte
* Precompute-Init
* Precompute-Merkle-Demgard
* Early-Skip
* Not-Salted
* Not-Iterated
* Single-Hash
* Single-Salt
* Brute-Force
* Raw-Hash
Watchdog: Temperature abort trigger set to 80c
Watchdog: Temperature retain trigger set to 75c
Initializing device kernels and memory...
ERROR: clBuildProgram(): CL_INVALID_BINARY
C:\Users\didge\Downloads\hashcat-3.10>hashcat64.exe -a 3 -m 100 --session=3 -o "C:\Users\didge\Desktop\HashcatGUI_050b1\tmp85E5_fo
und100.txt" --outfile-format=3 -w 2 --gpu-temp-abort=80 -d 3 -1 ?l?d "C:\Users\didge\AppData\Local\Temp\tmp85E5.tmp" ?1?1?1?1?1?1?1
?1
hashcat (v3.10) starting...
OpenCL Platform #1: NVIDIA Corporation
======================================
- Device #1: GeForce GTX 570, skipped
- Device #2: GeForce GTX 570, skipped
- Device #3: GeForce GTX 660, 512/2048 MB allocatable, 5MCU
Hashes: 1 hashes; 1 unique digests, 1 unique salts
Bitmaps: 16 bits, 65536 entries, 0x0000ffff mask, 262144 bytes, 5/13 rotates
Applicable Optimizers:
* Zero-Byte
* Precompute-Init
* Precompute-Merkle-Demgard
* Early-Skip
* Not-Salted
* Not-Iterated
* Single-Hash
* Single-Salt
* Brute-Force
* Raw-Hash
Watchdog: Temperature abort trigger set to 80c
Watchdog: Temperature retain trigger set to 75c
Initializing device kernels and memory...
ERROR: clBuildProgram(): CL_INVALID_BINARY
C:\Users\didge\Downloads\hashcat-3.10>