NvAPI GPU_NOT_POWERED Errors

[MandrillHorseCat]

I have reinstalled hashcat, the drivers, and had the graphics card/motherboard replaced, and the issues persists.

For clarity, this is my terminal output when I attempt to crack the example hashes:

Code:

> .\hashcat.exe -m0 .\example0.hash
hashcat (v6.2.6) starting

Successfully initialized the NVIDIA main driver CUDA runtime library.

Failed to initialize NVIDIA RTC library.

* Device #1: CUDA SDK Toolkit not installed or incorrectly installed.
            CUDA SDK Toolkit required for proper device support and utilization.
            Falling back to OpenCL runtime.

* Device #1: WARNING! Kernel exec timeout is not disabled.
            This may cause "CL_OUT_OF_RESOURCES" or related errors.
            To disable the timeout, see: https://hashcat.net/q/timeoutpatch
nvmlDeviceGetFanSpeed(): Not Supported

OpenCL API (OpenCL 3.0 CUDA 12.0.151) - Platform #1 [NVIDIA Corporation]
========================================================================
* Device #1: NVIDIA RTX 2000 Ada Generation Laptop GPU, 7424/8187 MB (2046 MB allocatable), 24MCU

OpenCL API (OpenCL 3.0 ) - Platform #2 [Intel(R) Corporation]
=============================================================
* Device #2: Intel(R) Iris(R) Xe Graphics, 6432/12981 MB (2047 MB allocatable), 96MCU

Minimum password length supported by kernel: 0
Maximum password length supported by kernel: 256

Hashes: 6494 digests; 6494 unique digests, 1 unique salts
Bitmaps: 16 bits, 65536 entries, 0x0000ffff mask, 262144 bytes, 5/13 rotates
Rules: 1

Optimizers applied:
* Zero-Byte
* Early-Skip
* Not-Salted
* Not-Iterated
* Single-Salt
* Raw-Hash

ATTENTION! Pure (unoptimized) backend kernels selected.
Pure kernels can crack longer passwords, but drastically reduce performance.
If you want to switch to optimized kernels, append -O to your commandline.
See the above message to find out about the exact limits.

Watchdog: Temperature abort trigger set to 90c

Host memory required for this attack: 1756 MB

Starting attack in stdin mode

Driver temperature threshold met on GPU #1. Expect reduced performance.
Driver temperature threshold met on GPU #1. Expect reduced performance.
Driver temperature threshold met on GPU #1. Expect reduced performance.

Session..........: hashcat
Status...........: Running
Hash.Mode........: 0 (MD5)
Hash.Target......: .\example0.hash
Time.Started.....: Fri Jan 05 09:35:11 2024 (10 secs)
Time.Estimated...: Fri Jan 05 09:35:21 2024 (0 secs)
Kernel.Feature...: Pure Kernel
Guess.Base.......: Pipe
Speed.#1.........:        0 H/s (0.00ms) @ Accel:1024 Loops:1 Thr:64 Vec:1
Speed.#2.........:        0 H/s (0.00ms) @ Accel:128 Loops:1 Thr:64 Vec:1
Speed.#*.........:        0 H/s
Recovered........: 0/6494 (0.00%) Digests (total), 0/6494 (0.00%) Digests (new)
Remaining........: 6494 (100.00%) Digests
Recovered/Time...: CUR:N/A,N/A,N/A AVG:N/A,N/A,N/A (Min,Hour,Day)
Progress.........: 0
Rejected.........: 0
Restore.Point....: 0
Restore.Sub.#1...: Salt:0 Amplifier:0-0 Iteration:0-1
Restore.Sub.#2...: Salt:0 Amplifier:0-0 Iteration:0-1
Candidate.Engine.: Device Generator
Candidates.#1....: [Copying]
Candidates.#2....: [Copying]
Hardware.Mon.#1..: Temp: 55c Util:  0% Core: 210MHz Mem: 405MHz Bus:8
Hardware.Mon.#2..: N/A

NvAPI_GPU_GetPerfPoliciesInfo(): NVAPI_GPU_NOT_POWERED

NvAPI_GPU_GetPerfPoliciesStatus(): NVAPI_GPU_NOT_POWERED

nvmlDeviceGetUtilizationRates(): Unknown Error

NvAPI_GPU_GetPerfPoliciesInfo(): NVAPI_GPU_NOT_POWERED

NvAPI_GPU_GetPerfPoliciesStatus(): NVAPI_GPU_NOT_POWERED

NvAPI_GPU_GetPerfPoliciesInfo(): NVAPI_GPU_NOT_POWERED

NvAPI_GPU_GetPerfPoliciesStatus(): NVAPI_GPU_NOT_POWERED

NvAPI_GPU_GetPerfPoliciesInfo(): NVAPI_GPU_NOT_POWERED

NvAPI_GPU_GetPerfPoliciesStatus(): NVAPI_GPU_NOT_POWERED

NvAPI_GPU_GetPerfPoliciesInfo(): NVAPI_GPU_NOT_POWERED

NvAPI_GPU_GetPerfPoliciesStatus(): NVAPI_GPU_NOT_POWERED

NvAPI_GPU_GetPerfPoliciesInfo(): NVAPI_GPU_NOT_POWERED

NvAPI_GPU_GetPerfPoliciesStatus(): NVAPI_GPU_NOT_POWERED

NvAPI_GPU_GetPerfPoliciesInfo(): NVAPI_GPU_NOT_POWERED

NvAPI_GPU_GetPerfPoliciesStatus(): NVAPI_GPU_NOT_POWERED

NvAPI_GPU_GetPerfPoliciesInfo(): NVAPI_GPU_NOT_POWERED

NvAPI_GPU_GetPerfPoliciesStatus(): NVAPI_GPU_NOT_POWERED

NvAPI_GPU_GetPerfPoliciesInfo(): NVAPI_GPU_NOT_POWERED

NvAPI_GPU_GetPerfPoliciesStatus(): NVAPI_GPU_NOT_POWERED

NvAPI_GPU_GetPerfPoliciesInfo(): NVAPI_GPU_NOT_POWERED

NvAPI_GPU_GetPerfPoliciesStatus(): NVAPI_GPU_NOT_POWERED

Session..........: hashcat
Status...........: Running
Hash.Mode........: 0 (MD5)
Hash.Target......: .\example0.hash
Time.Started.....: Fri Jan 05 09:35:11 2024 (20 secs)
Time.Estimated...: Fri Jan 05 09:35:31 2024 (0 secs)
Kernel.Feature...: Pure Kernel
Guess.Base.......: Pipe
Speed.#1.........:        0 H/s (0.00ms) @ Accel:1024 Loops:1 Thr:64 Vec:1
Speed.#2.........:        0 H/s (0.00ms) @ Accel:128 Loops:1 Thr:64 Vec:1
Speed.#*.........:        0 H/s
Recovered........: 0/6494 (0.00%) Digests (total), 0/6494 (0.00%) Digests (new)
Remaining........: 6494 (100.00%) Digests
Recovered/Time...: CUR:N/A,N/A,N/A AVG:N/A,N/A,N/A (Min,Hour,Day)
Progress.........: 0
Rejected.........: 0
Restore.Point....: 0
Restore.Sub.#1...: Salt:0 Amplifier:0-0 Iteration:0-1
Restore.Sub.#2...: Salt:0 Amplifier:0-0 Iteration:0-1
Candidate.Engine.: Device Generator
Candidates.#1....: [Copying]
Candidates.#2....: [Copying]
Hardware.Mon.#1..: Temp: 55c Core: 210MHz Mem: 405MHz Bus:8
Hardware.Mon.#2..: N/A

Driver temperature threshold met on GPU #1. Expect reduced performance.
ATTENTION! Read timeout in stdin mode. Password candidates input is too slow:
* Are you sure you are using the correct attack mode (--attack-mode or -a)?
* Are you sure you want to use input from standard input (stdin)?
* If using stdin, are you sure it is working correctly, and is fast enough?