Very slow speed - GTX 1060 6GB

[ThaBot]

Hey, I have a nvidia gtx 1060 6gb card, and my laptop's ram is 16 GB

I'm trying to crack bcrypt passwords, mode (3200).
This is the command I used to start the hashcat session: 

Code:

hashcat.exe -m 3200 -a 0 C:\Users\egyma\Downloads\Haram\hashcat-6.2.3\hash.txt C:\Users\egyma\Downloads\smallwordlists\smallwordlists --force

However, it is taking forever. The speed is very low. Screenshot of speed: 

And this is my hashcat's benchmark: 

C:\Users\egyma\Downloads\Haram\hashcat-6.2.3>hashcat.exe -b
hashcat (v6.2.3) starting in benchmark mode

Benchmarking uses hand-optimized kernel code by default.
You can use it in your cracking session by setting the -O option.
Note: Using optimized kernel code limits the maximum supported password length.
To disable the optimized kernel code in benchmark mode, use the -w option.

Successfully initialized NVIDIA CUDA library.

Failed to initialize NVIDIA RTC library.

* Device #1: CUDA SDK Toolkit not installed or incorrectly installed.
            CUDA SDK Toolkit required for proper device support and utilization.
            Falling back to OpenCL runtime.

* Device #1: WARNING! Kernel exec timeout is not disabled.
            This may cause "CL_OUT_OF_RESOURCES" or related errors.
            To disable the timeout, see: https://hashcat.net/q/timeoutpatch
* Device #2: Unstable OpenCL driver detected!

This OpenCL driver may fail kernel compilation or produce false negatives.
You can use --force to override, but do not report related errors.

nvmlDeviceGetFanSpeed(): Not Supported

OpenCL API (OpenCL 1.2 CUDA 11.2.109) - Platform #1 [NVIDIA Corporation]
========================================================================
* Device #1: GeForce GTX 1060, 4864/6144 MB (1536 MB allocatable), 10MCU

OpenCL API (OpenCL 2.1 ) - Platform #2 [Intel(R) Corporation]
=============================================================
* Device #2: Intel(R) UHD Graphics 630, skipped
* Device #3: Intel(R) Core(TM) i7-8750H CPU @ 2.20GHz, skipped

Benchmark relevant options:
===========================
* --optimized-kernel-enable

Hashmode: 0 - MD5

Speed.#1.........: 10913.1 MH/s (59.78ms) @ Accel:64 Loops:1024 Thr:1024 Vec:8

Hashmode: 100 - SHA1

Speed.#1.........:  3769.4 MH/s (87.26ms) @ Accel:64 Loops:512 Thr:1024 Vec:1

Hashmode: 1400 - SHA2-256

Speed.#1.........:  1344.4 MH/s (60.72ms) @ Accel:16 Loops:512 Thr:1024 Vec:1

Hashmode: 1700 - SHA2-512

Speed.#1.........:  403.5 MH/s (50.26ms) @ Accel:8 Loops:256 Thr:1024 Vec:1

Hashmode: 22000 - WPA-PBKDF2-PMKID+EAPOL (Iterations: 4095)

Speed.#1.........:  185.9 kH/s (53.89ms) @ Accel:16 Loops:256 Thr:1024 Vec:1

Hashmode: 1000 - NTLM

Speed.#1.........: 18821.8 MH/s (33.94ms) @ Accel:64 Loops:1024 Thr:1024 Vec:8

Hashmode: 3000 - LM

Speed.#1.........:  9467.3 MH/s (67.68ms) @ Accel:1024 Loops:1024 Thr:64 Vec:1

Hashmode: 5500 - NetNTLMv1 / NetNTLMv1+ESS

Speed.#1.........:  9834.9 MH/s (66.52ms) @ Accel:64 Loops:1024 Thr:1024 Vec:2

Hashmode: 5600 - NetNTLMv2

Speed.#1.........:  739.7 MH/s (54.96ms) @ Accel:4 Loops:1024 Thr:1024 Vec:1

Hashmode: 1500 - descrypt, DES (Unix), Traditional DES

Speed.#1.........:  364.4 MH/s (54.25ms) @ Accel:32 Loops:1024 Thr:64 Vec:1

Hashmode: 500 - md5crypt, MD5 (Unix), Cisco-IOS $1$ (MD5) (Iterations: 1000)

Speed.#1.........:  4398.8 kH/s (70.23ms) @ Accel:64 Loops:500 Thr:1024 Vec:1

Hashmode: 3200 - bcrypt $2*$, Blowfish (Unix) (Iterations: 32)

Speed.#1.........:    9098 H/s (21.27ms) @ Accel:4 Loops:16 Thr:11 Vec:1

Hashmode: 1800 - sha512crypt $6$, SHA512 (Unix) (Iterations: 5000)

Speed.#1.........:    66397 H/s (59.49ms) @ Accel:4 Loops:512 Thr:1024 Vec:1

Hashmode: 7500 - Kerberos 5, etype 23, AS-REQ Pre-Auth

Speed.#1.........:  158.2 MH/s (64.65ms) @ Accel:256 Loops:128 Thr:32 Vec:1

Hashmode: 13100 - Kerberos 5, etype 23, TGS-REP

Speed.#1.........:  154.8 MH/s (66.11ms) @ Accel:32 Loops:1024 Thr:32 Vec:1

Hashmode: 15300 - DPAPI masterkey file v1 (Iterations: 23999)

Speed.#1.........:    31660 H/s (54.00ms) @ Accel:8 Loops:512 Thr:1024 Vec:1

Hashmode: 15900 - DPAPI masterkey file v2 (Iterations: 12899)

Speed.#1.........:    14703 H/s (52.53ms) @ Accel:2 Loops:512 Thr:1024 Vec:1

Hashmode: 7100 - macOS v10.8+ (PBKDF2-SHA512) (Iterations: 1023)

Speed.#1.........:  179.2 kH/s (35.84ms) @ Accel:2 Loops:511 Thr:1024 Vec:1

Hashmode: 11600 - 7-Zip (Iterations: 16384)

Speed.#1.........:  162.3 kH/s (59.75ms) @ Accel:4 Loops:4096 Thr:1024 Vec:1

Hashmode: 12500 - RAR3-hp (Iterations: 262144)

Speed.#1.........:    23688 H/s (106.71ms) @ Accel:32 Loops:16384 Thr:128 Vec:1

Hashmode: 13000 - RAR5 (Iterations: 32799)

Speed.#1.........:    16406 H/s (77.03ms) @ Accel:8 Loops:512 Thr:1024 Vec:1

Hashmode: 6211 - TrueCrypt RIPEMD160 + XTS 512 bit (Iterations: 1999)

Speed.#1.........:  123.9 kH/s (77.15ms) @ Accel:8 Loops:256 Thr:1024 Vec:1

Hashmode: 13400 - KeePass 1 (AES/Twofish) and KeePass 2 (AES) (Iterations: 24569)

Speed.#1.........:    15876 H/s (214.08ms) @ Accel:8 Loops:1024 Thr:1024 Vec:1

Hashmode: 6800 - LastPass + LastPass sniffed (Iterations: 499)

Speed.#1.........:  1011.9 kH/s (75.63ms) @ Accel:8 Loops:499 Thr:1024 Vec:1

Hashmode: 11300 - Bitcoin/Litecoin wallet.dat (Iterations: 200459)

Speed.#1.........:    1995 H/s (51.51ms) @ Accel:4 Loops:512 Thr:1024 Vec:1

I don't know why it is that slow? Can someone help me? Is it only using the Intel Integrated card for example? I don't know.. Also, I had another question, can I shutdown my laptop for a bit then continue my hash cracking without starting from the beginning? How can I do that?

My nvidia driver version is is 461.09