Kernel not found--No such file or directory
#1
Setting up vclHashcat-plus v0.09, but this isn't about vcl. The master machine cannot build a driver for my GTS450 which is in the slave machine, but the slave can--if ran in standalone mode. This is from the master...

Code:
./vclHashcat-plus64.bin --gpu-temp-disable -m 2500 -d 01 /home/pinkpanther/Desktop/capture.hccap /home/pinkpanther/Desktop/darkc0de.lst
oclHashcat-plus v0.09 by atom starting...

Hashes: 1 total, 1 unique salts, 1 unique digests
Bitmaps: 8 bits, 256 entries, 0x000000ff mask, 1024 bytes
Rules: 1
Workload: 16 loops, 8 accel
Watchdog: Temperature abort trigger disabled
Watchdog: Temperature retain trigger disabled
Device #1: GeForce GTS 450, 1023MB, 1566Mhz, 4MCU
Device #2: skipped by user
Device #1: Kernel ./kernels/4098/m2500.GeForce GTS 450__.kernel not found in cache! Building may take a while...
ERROR: ./kernels/4098/m2500.VLIW0.llvmir: No such file or directory

However, when using the same v0.09 software, the slave machine (used as a standalone machine) will run cudaHashcat-plus64 perfectly. If both machines have the same kernels, it should work right? Niether machine has the file m2500.VLIW0.llvmir. Please give any ideas Smile.

Code:
./cudaHashcat-plus64.bin -m 2500 -d 01 /root/Desktop/capture.hccap /pentest/passwords/wordlists/darkc0de.lst
cudaHashcat-plus v0.09 by atom starting...

Hashes: 1 total, 1 unique salts, 1 unique digests
Bitmaps: 8 bits, 256 entries, 0x000000ff mask, 1024 bytes
Rules: 1
Workload: 16 loops, 8 accel
Watchdog: Temperature abort trigger set to 90c
Watchdog: Temperature retain trigger set to 80c
Device #1: GeForce GTS 450, 1023MB, 1566Mhz, 4MCU
Device #2: skipped by user
Device #1: Kernel ./kernels/4318/m2500.sm_21.ptx


Messages In This Thread
Kernel not found--No such file or directory - by PnkPanther - 10-24-2012, 08:54 PM