I'm confused.
I've reinstalled the o/s, with one card installed. Added each card one by one, doing an "aticonfig --adapter=all --initial -f" each time, all four detected, both in aticonfig and in clinfo. The cards were also physically swapped to check they are all working.
Then, I install od6config- works fine, I do an "od6config --get temp", all four cards are there. I edit my .bashrc to have "od6config --adapters 0,1,2,3 --autofix --set core=1100,mem=1375", reboot, and I get the damned message from od6config telling me there are only three cards again.
I check lspci, four detected. I check "aticonfig --adapter=all --odgt", four cards. I check "clinfo | grep GPU", three cards. If I run oclhashcat, three cards.
Redid another "aticonfig --adapter=all --initial -f", same.
What the hell?!?
I've reinstalled the o/s, with one card installed. Added each card one by one, doing an "aticonfig --adapter=all --initial -f" each time, all four detected, both in aticonfig and in clinfo. The cards were also physically swapped to check they are all working.
Then, I install od6config- works fine, I do an "od6config --get temp", all four cards are there. I edit my .bashrc to have "od6config --adapters 0,1,2,3 --autofix --set core=1100,mem=1375", reboot, and I get the damned message from od6config telling me there are only three cards again.
I check lspci, four detected. I check "aticonfig --adapter=all --odgt", four cards. I check "clinfo | grep GPU", three cards. If I run oclhashcat, three cards.
Redid another "aticonfig --adapter=all --initial -f", same.
What the hell?!?