Warnings in hashcat v3 not present in cudaHashcat v2.01 - should I care?
#13
Here you go

Code:
cat /etc/X11/xorg.conf
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig:  version 367.35  (buildmeister@swio-display-x64-rhel04-01)  Mon Jul 11 23:51:45 PDT 2016


Section "ServerLayout"
   Identifier     "Layout0"
   Screen      0  "Screen0" 0 0
   Screen      1  "Screen1" RightOf "Screen0"
   Screen      2  "Screen2" RightOf "Screen1"
   InputDevice    "Keyboard0" "CoreKeyboard"
   InputDevice    "Mouse0" "CorePointer"
EndSection

Section "Files"
EndSection

Section "InputDevice"

   # generated from default
   Identifier     "Mouse0"
   Driver         "mouse"
   Option         "Interactive" "False"
   Option         "Protocol" "auto"
   Option         "Device" "/dev/psaux"
   Option         "Emulate3Buttons" "no"
   Option         "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"

   # generated from default
   Identifier     "Keyboard0"
   Driver         "kbd"
   Option         "Interactive" "False"
EndSection

Section "Monitor"
   Identifier     "Monitor0"
   VendorName     "Unknown"
   ModelName      "Unknown"
   HorizSync       28.0 - 33.0
   VertRefresh     43.0 - 72.0
   Option         "DPMS"
EndSection

Section "Monitor"
   Identifier     "Monitor1"
   VendorName     "Unknown"
   ModelName      "Unknown"
   HorizSync       28.0 - 33.0
   VertRefresh     43.0 - 72.0
   Option         "DPMS"
EndSection

Section "Monitor"
   Identifier     "Monitor2"
   VendorName     "Unknown"
   ModelName      "Unknown"
   HorizSync       28.0 - 33.0
   VertRefresh     43.0 - 72.0
   Option         "DPMS"
EndSection

Section "Device"
   Identifier     "Device0"
   Driver         "nvidia"
   VendorName     "NVIDIA Corporation"
   BoardName      "GeForce GTX 980 Ti"
   BusID          "PCI:3:0:0"
EndSection

Section "Device"
   Identifier     "Device1"
   Driver         "nvidia"
   VendorName     "NVIDIA Corporation"
   BoardName      "GeForce GTX 980 Ti"
   BusID          "PCI:129:0:0"
EndSection

Section "Device"
   Identifier     "Device2"
   Driver         "nvidia"
   VendorName     "NVIDIA Corporation"
   BoardName      "GeForce GTX 980 Ti"
   BusID          "PCI:130:0:0"
EndSection

Section "Screen"
   Identifier     "Screen0"
   Device         "Device0"
   Monitor        "Monitor0"
   DefaultDepth    24
   Option         "AllowEmptyInitialConfiguration" "True"
   Option         "RegistryDwords" "PerfLevelSrc==0x2222"
   Option         "Interactive" "False"
   Option         "Coolbits" "12"
   SubSection     "Display"
       Depth       24
   EndSubSection
EndSection

Section "Screen"
   Identifier     "Screen1"
   Device         "Device1"
   Monitor        "Monitor1"
   DefaultDepth    24
   Option         "AllowEmptyInitialConfiguration" "True"
   Option         "RegistryDwords" "PerfLevelSrc==0x2222"
   Option         "Interactive" "False"
   Option         "Coolbits" "12"
   SubSection     "Display"
       Depth       24
   EndSubSection
EndSection

Section "Screen"
   Identifier     "Screen2"
   Device         "Device2"
   Monitor        "Monitor2"
   DefaultDepth    24
   Option         "AllowEmptyInitialConfiguration" "True"
   Option         "RegistryDwords" "PerfLevelSrc==0x2222"
   Option         "Interactive" "False"
   Option         "Coolbits" "12"
   SubSection     "Display"
       Depth       24
   EndSubSection
EndSection

The RegistryDwords and other settings under the various screens stem from the commands posted here https://hashcat.net/forum/thread-3717-po...l#pid23470 .

Let me know if you want/need more information.


Messages In This Thread
RE: Warnings in hashcat v3 not present in cudaHashcat v2.01 - should I care? - by voideater - 07-27-2016, 11:42 AM