Problem with OSX v10.7
#1
Hi,

I try to benchmark OSX v10.7 algo using PLUS v0.081:
Code:
oclHashcat-plus64.exe -a 3 --gpu-accel 700  --gpu-loops 1024 --custom-charset1 ?d?l?u?s -m 1722 C:\h_osx.txt  ?1?1?1?1?1?1?1?1?1
oclHashcat-plus v0.08 by atom starting...

Hashes: 2
Unique salts: 1
Unique digests: 2
Bitmaps: 8 bits, 256 entries, 0x000000ff mask, 1024 bytes
GPU-Loops: 1024
GPU-Accel: 700
Password lengths range: 1 - 15
Platform: AMD compatible platform found
Watchdog: Temperature limit disabled
Device #1: Cypress, 1024MB, 0Mhz, 20MCU
Device #1: Allocating 1052MB host-memory
Device #1: Kernel ./kernels/4098/m1720_a3.Cypress.64.kernel (1126592 bytes)

[s]tatus [p]ause [r]esume [q]uit => s
Status.......: Running
Input.Mode...: Mask (?1?1?1?1?1?1?1?1?1)
Hash.Target..: File (C:\h_osx.txt)
Hash.Type....: OSX v10.7
Time.Running.: 1 min, 53 secs
Time.Left....: 0 secs
Time.Util....: 1227.8ms/1.0ms Real/CPU, 0.1% idle
Speed........:        0 c/s Real,        0 c/s GPU
Recovered....: 0/2 Digests, 0/1 Salts
Progress.....: 0/630249409724609375 (0.00%)
Rejected.....: 0/0 (0.00%)
[s]tatus [p]ause [r]esume [q]uit =>

"Speed........: 0 c/s Real, 0 c/s GPU" : It does not run ?!
Thanks
#2
Try again with -n 8
#3
It works well with -n 8.
Why ? -n 700 is too high for this algorithm or for my card ?
#4
I do not recommend -n 700 for plus at all since its ways to high (see your host memory requirement while its running with this setting). I would not go over -n 160 and that only if you have a very fast GPU.