13 gpu issue

[qweasd21]

ok i used \$ and its loaded now

THX!

philsmd: thx for tip!

testing

[qweasd21]

And final questions...

this is v3 wallet with scrypt... so no chance amd 8 gb ram will work (because CU?) with that... right?

1080 will work because use SM and is better but not much faster?

How about ryzen cpu ? or new i9 ?

im trying -D 1 ... but segmention faults on my cpu...

-------------------------------------------------

i switch pc and now i have:

hashcat (v4.0.1-84-g7c1fb01) starting...

OpenCL Platform #1: Advanced Micro Devices, Inc.
================================================
* Device #1: Intel(R) Core(TM) i7-3840QM CPU @ 2.80GHz, 7937/31748 MB allocatable, 8MCU

OpenCL Platform #2: NVIDIA Corporation
======================================
* Device #2: Quadro K1000M, skipped.


and i want to try device 1 cpu

when i tried hash and dictoniary... its trying to start but


Hashes: 1 digests; 1 unique digests, 1 unique salts
Bitmaps: 16 bits, 65536 entries, 0x0000ffff mask, 262144 bytes, 5/13 rotates
Rules: 1

Applicable optimizers:
* Zero-Byte
* Single-Hash
* Single-Salt

Password length minimum: 0
Password length maximum: 256

Watchdog: Temperature abort trigger set to 90c

Initializing device kernels and memory...Segmentation fault


when u try quadro gpu it loads dictrionary... but exhausted... to low gpu memory... but why CPU doesnt work?

when i start default i see this:

* Device #1: Not a native Intel OpenCL runtime. Expect massive speed loss.
You can use --force to override, but do not report related errors.
* Device #2: This hardware has outdated CUDA compute capability (3.0).
For modern OpenCL performance, upgrade to hardware that supports
CUDA compute capability version 5.0 (Maxwell) or higher.
* Device #2: WARNING! Kernel exec timeout is not disabled.
This may cause "CL_OUT_OF_RESOURCES" or related errors.
To disable the timeout, see: https://hashcat.net/q/timeoutpatch

maybe this is a problem?

[philsmd]

There are a lot of warnings in your output.
Starting from the timeout patch problem to the "Not a native Intel OpenCL runtime" error.
It's not a good idea to ignore all warnings and don't try to fix them.

Intel has a dedicated OpenCL Runtime (not SDK!) page where you can download the Intel OpenCL Runtime for your CPU.

I also just noticed that this confusion about -D/-d might come from blogs like this one: https://stealthsploit.com/2018/01/04/eth...pu-vs-cpu/
There are a lot of people trying exactly that, i.e. run -D 12 or something like that even through it makes absoultely no sense if you read the --help output (-D only allows 3 different values 1, 2 or 3 and this values are not for the device selection but for the type selection). Therefore in my opinion the whole article (all the -D x recommendation etc) needs to be fixed. Maybe someone can contact the author before we get flooded with several "problems" like this one (see original post of this thread).