Low Speed for MD5(Unix)
#1
Hello everyone,
on the comparison table provided by oclHashCat-Plus
is shown that with 2x6990 you can get 9.9 M/s
however I have different combinations - 2x6990, 1x6990+2x5970, 3x7970 and I'm unable to get more than 4.5 M/s
Is there a problem with the new version because when the comparison table was made it was other version without bruteforce mechanism. I tried with all the values for -n and loops.
OclHashCat found all the GPUs just get slow speed and GPUs are all up to about 30%.
Can someone check this and write the results with different cards ?
Thanks in advance
#2
plus does not support 7970, wonder how you could have test it. also plus does not support mixed gpu types. do 2x6990 only or 2x5970. that might be your problem.
#3
(02-02-2012, 05:58 PM)atom Wrote: plus does not support 7970, wonder how you could have test it. also plus does not support mixed gpu types. do 2x6990 only or 2x5970. that might be your problem.

I will try it for sure.
however with 3x7970 if I run oclhashcat in windows with 32 bit binary it works... but very slow
if I run 64 bit it is not working.
Windows is 64 bits and as far as I read about it - it is not yet supported ( the 7 series )
I will try only one type at a time
thanks
#4
Mixed GPU support added to latest version, thread closed.