07-07-2016, 10:12 PM
I have been working with Hashcat for a while now running with 2x290 on an intel DP69BGB3 motherboard. I recently purchased two additional cards which i would like to add to this rig but i can't seem to get them working. Additionally, i have a 1600 watt power supply for this rig in anticipation of running the 4 cards from it - so power isn't an issue.
The first two cards are connected directly into the 16x slots on the motherboard while the second two will be connected using 1X risers. I know that the computer is recognizing that the three cards are there as you can see from the output below:
$ lspci -vnn | grep VGA -A 12
01:00.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] Hawaii XT / Grenada XT [Radeon R9 290X/390X] [1002:67b0] (prog-if 00 [VGA controller])
Subsystem: PC Partner Limited / Sapphire Technology R9 290X Tri-X OC [174b:e285]
Flags: bus master, fast devsel, latency 0, IRQ 41
Memory at a0000000 (64-bit, prefetchable)
Memory at b0000000 (64-bit, prefetchable)
I/O ports at 4000
Memory at f0d00000 (32-bit, non-prefetchable)
Expansion ROM at f0d60000 [disabled]
Capabilities: <access denied>
Kernel driver in use: fglrx_pci
01:00.1 Audio device [0403]: Advanced Micro Devices, Inc. [AMD/ATI] Hawaii HDMI Audio [1002:aac8]
Subsystem: PC Partner Limited / Sapphire Technology Device [174b:aac8]
--
02:00.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] Hawaii XT / Grenada XT [Radeon R9 290X/390X] [1002:67b0] (prog-if 00 [VGA controller])
Subsystem: PC Partner Limited / Sapphire Technology R9 290X Tri-X OC [174b:e285]
Flags: bus master, fast devsel, latency 0, IRQ 42
Memory at c0000000 (64-bit, prefetchable)
Memory at d0000000 (64-bit, prefetchable)
I/O ports at 3000
Memory at f0c00000 (32-bit, non-prefetchable)
Expansion ROM at f0c60000 [disabled]
Capabilities: <access denied>
Kernel driver in use: fglrx_pci
02:00.1 Audio device [0403]: Advanced Micro Devices, Inc. [AMD/ATI] Hawaii HDMI Audio [1002:aac8]
Subsystem: PC Partner Limited / Sapphire Technology Device [174b:aac8]
--
07:00.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] Hawaii XT / Grenada XT [Radeon R9 290X/390X] [1002:67b0] (prog-if 00 [VGA controller])
Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] Device [1002:0b00]
Flags: bus master, fast devsel, latency 0, IRQ 43
Memory at e0000000 (64-bit, prefetchable)
Memory at f0000000 (64-bit, prefetchable)
I/O ports at 2000
Memory at f0900000 (32-bit, non-prefetchable)
Expansion ROM at f0960000 [disabled]
Capabilities: <access denied>
Kernel driver in use: fglrx_pci
07:00.1 Audio device [0403]: Advanced Micro Devices, Inc. [AMD/ATI] Hawaii HDMI Audio [1002:aac8]
Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] Hawaii HDMI Audio [1002:aac8]
All three cards can be seen by the comp, but when i try to run Hashcat to benchmark the program just hangs..
Any thoughts on what the problem could be? I would really appreciate any help you could provide me with.
The first two cards are connected directly into the 16x slots on the motherboard while the second two will be connected using 1X risers. I know that the computer is recognizing that the three cards are there as you can see from the output below:
$ lspci -vnn | grep VGA -A 12
01:00.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] Hawaii XT / Grenada XT [Radeon R9 290X/390X] [1002:67b0] (prog-if 00 [VGA controller])
Subsystem: PC Partner Limited / Sapphire Technology R9 290X Tri-X OC [174b:e285]
Flags: bus master, fast devsel, latency 0, IRQ 41
Memory at a0000000 (64-bit, prefetchable)
Memory at b0000000 (64-bit, prefetchable)
I/O ports at 4000
Memory at f0d00000 (32-bit, non-prefetchable)
Expansion ROM at f0d60000 [disabled]
Capabilities: <access denied>
Kernel driver in use: fglrx_pci
01:00.1 Audio device [0403]: Advanced Micro Devices, Inc. [AMD/ATI] Hawaii HDMI Audio [1002:aac8]
Subsystem: PC Partner Limited / Sapphire Technology Device [174b:aac8]
--
02:00.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] Hawaii XT / Grenada XT [Radeon R9 290X/390X] [1002:67b0] (prog-if 00 [VGA controller])
Subsystem: PC Partner Limited / Sapphire Technology R9 290X Tri-X OC [174b:e285]
Flags: bus master, fast devsel, latency 0, IRQ 42
Memory at c0000000 (64-bit, prefetchable)
Memory at d0000000 (64-bit, prefetchable)
I/O ports at 3000
Memory at f0c00000 (32-bit, non-prefetchable)
Expansion ROM at f0c60000 [disabled]
Capabilities: <access denied>
Kernel driver in use: fglrx_pci
02:00.1 Audio device [0403]: Advanced Micro Devices, Inc. [AMD/ATI] Hawaii HDMI Audio [1002:aac8]
Subsystem: PC Partner Limited / Sapphire Technology Device [174b:aac8]
--
07:00.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] Hawaii XT / Grenada XT [Radeon R9 290X/390X] [1002:67b0] (prog-if 00 [VGA controller])
Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] Device [1002:0b00]
Flags: bus master, fast devsel, latency 0, IRQ 43
Memory at e0000000 (64-bit, prefetchable)
Memory at f0000000 (64-bit, prefetchable)
I/O ports at 2000
Memory at f0900000 (32-bit, non-prefetchable)
Expansion ROM at f0960000 [disabled]
Capabilities: <access denied>
Kernel driver in use: fglrx_pci
07:00.1 Audio device [0403]: Advanced Micro Devices, Inc. [AMD/ATI] Hawaii HDMI Audio [1002:aac8]
Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] Hawaii HDMI Audio [1002:aac8]
All three cards can be seen by the comp, but when i try to run Hashcat to benchmark the program just hangs..
Any thoughts on what the problem could be? I would really appreciate any help you could provide me with.
