cudaHashcat-plus64.bin at amazon ec2 cg1.4xlarge instance

[whiskas]

I think I have found the solution by myself.
It seems there was a permission problem.
I installed back the original installed versions
nvidia-313.18-2012.09.0.amzn1.x86_64 and
cudatoolkit-4.2.9-1.2.amzn1.x86_64.
Then I simply typed a "sudo" before the cudaHashcat command.
Sometimes life can be so easy... :-)

sudo ./cudaHashcat-plus64.bin -a 3 -m 2500 ./WPA.hccap
cudaHashcat-plus v0.13 by atom starting...

Hashes: 1 total, 1 unique salts, 1 unique digests
Bitmaps: 8 bits, 256 entries, 0x000000ff mask, 1024 bytes
Workload: 16 loops, 8 accel
Watchdog: Temperature abort trigger set to 90c
Watchdog: Temperature retain trigger set to 80c
Device #1: Tesla M2050, 2687MB, 1147Mhz, 14MCU
Device #2: Tesla M2050, 2687MB, 1147Mhz, 14MCU
Device #1: Kernel ./kernels/4318/m2500.sm_20.ptx
Device #2: Kernel ./kernels/4318/m2500.sm_20.ptx

[s]tatus [p]ause [r]esume [b]ypass [q]uit => s
Session.Name...: cudaHashcat-plus
Status.........: Running
Input.Mode.....: Mask (?1?2?2?2?2?2?2?3)
Hash.Target....: XXXXXXXXXXX (xx:xx:xx:xx:xx:xx <-> xx:xx:xx:xx:xx:xx)
Hash.Type......: WPA/WPA2
Time.Started...: Tue Feb 19 19:30:49 2013 (17 secs)
Time.Estimated.: Mon Apr 24 15:56:53 2017 (4 years, 63 days)
Speed.GPU.#1...: 22355/s
Speed.GPU.#2...: 22444/s
Speed.GPU.#*...: 44799/s
Recovered......: 0/1 (0.00%) Digests, 0/1 (0.00%) Salts
Progress.......: 745472/5533380698112 (0.00%)
Rejected.......: 0/745472 (0.00%)
HWMon.GPU.#1...: 99% Util, -1c Temp, -1% Fan
HWMon.GPU.#2...: 99% Util, -1c Temp, -1% Fan


Here the benchmark test. But at the end there is an error.

sudo ./hashcat-benchmark.sh

Entire test will take approximately 3 minutes.
Your desktop may freeze during the benchmark.

Hash.Type......: MD5
Speed.GPU.#1...: 1203.2M/s

Hash.Type......: Joomla
Speed.GPU.#1...: 1004.6M/s

Hash.Type......: SHA1
Speed.GPU.#1...: 455.9M/s

Hash.Type......: MSSQL(2000)
Speed.GPU.#1...: 414.3M/s

Hash.Type......: phpass, MD5(Wordpress), MD5(phpBB3)
Speed.GPU.#1...: 487.6k/s

max --gpu-loops is 1000 in this --hash-typeMD5, Cisco-IOS MD5...

Hash.Type......: NTLM..
Speed.GPU.#1...: 1587.3M/s

Hash.Type......: DCC, mscashCredentials, mscash...
Speed.GPU.#1...: 709.6M/s

Hash.Type......: SHA256
Speed.GPU.#1...: 207.3M/s

Hash.Type......: descrypt, DES(Unix), Traditional DES
Speed.GPU.#1...: 22033.3k/s

Hash.Type......: SHA512
Speed.GPU.#1...: 66581.7k/s

Hash.Type......: sha512crypt, SHA512(Unix)
Speed.GPU.#1...: 7432/s

test.hccap: No such file or directory

Hash.Type......: LM
Speed.GPU.#1...: 258.4M/s

Hash.Type......: Oracle 7-10gES(Oracle)...
Speed.GPU.#1...: 83083.3k/s

ERROR: cuMemcpyDtoH() 700wfish(OpenBSD)...


which: no pastebinit in (/sbin:/bin:/usr/sbin:/usr/bin)

Benchmark complete.


The script only seems to use 1 GPU. But there are 2. Maybe a bug?