04-08-2014, 07:29 AM
Thank you for the answer. I'm trying this:
cudaHashcat64.exe --status -t 64 -a 3 -m 3000 lm.txt -1 ?u?d?s æøåÆØÅ ?l?l?l?l?l?l?l
lm.txt contains the 2 LM hash values. They should be properly extracted.
This is my output - it finished very fast:
cudaHashcat v1.01 starting...
Hashes: 2 total, 1 unique salts, 2 unique digests
Bitmaps: 8 bits, 256 entries, 0x000000ff mask, 1024 bytes
Applicable Optimizers:
* Zero-Byte
* Precompute-Final-Permutation
* Not-Iterated
* Single-Salt
* Brute-Force
* Scalar-Mode
Watchdog: Temperature abort trigger set to 90c
Watchdog: Temperature retain trigger set to 80c
Device #1: GeForce GTX 570, 1280MB, 1464Mhz, 15MCU
Device #2: GeForce GTX 570, 1280MB, 1464Mhz, 15MCU
Device #1: Kernel ./kernels/4318/m3000_a3.sm_20.64.ptx
Device #1: Kernel ./kernels/4318/markov_le_v1.64.ptx
Device #1: Kernel ./kernels/4318/bzero.64.ptx
Device #2: Kernel ./kernels/4318/m3000_a3.sm_20.64.ptx
Device #2: Kernel ./kernels/4318/markov_le_v1.64.ptx
Device #2: Kernel ./kernels/4318/bzero.64.ptx
Session.Name...: cudaHashcat
Status.........: Exhausted
Input.Mode.....: Mask (µ°ÕãÃ┼) [6]
Hash.Target....: File (lm.txt)
Hash.Type......: LM
Time.Started...: Tue Apr 08 07:21:34 2014 (1 sec)
Time.Estimated.: 0 secs
Speed.GPU.#1...: 0 H/s
Speed.GPU.#2...: 0 H/s
Speed.GPU.#*...: 0 H/s
Recovered......: 0/2 (0.00%) Digests, 0/1 (0.00%) Salts
Progress.......: 1/1 (100.00%)
Rejected.......: 0/1 (0.00%)
HWMon.GPU.#1...: 1% Util, 41c Temp, 1800rpm Fan
HWMon.GPU.#2...: 0% Util, 37c Temp, 1830rpm Fan
Started: Tue Apr 08 07:21:34 2014
Stopped: Tue Apr 08 07:21:35 2014
What worries me is the "mask" output, which looks pretty awkward.
I should have [space] in the custom charset: "?u?d?s æøåÆØÅ"
Trying without the [space] the mask output seems allright, but it still finishes too fast I believe:
Hashes: 2 total, 1 unique salts, 2 unique digests
Bitmaps: 8 bits, 256 entries, 0x000000ff mask, 1024 bytes
Applicable Optimizers:
* Zero-Byte
* Precompute-Final-Permutation
* Not-Iterated
* Single-Salt
* Brute-Force
* Scalar-Mode
Watchdog: Temperature abort trigger set to 90c
Watchdog: Temperature retain trigger set to 80c
Device #1: GeForce GTX 570, 1280MB, 1464Mhz, 15MCU
Device #2: GeForce GTX 570, 1280MB, 1464Mhz, 15MCU
Device #1: Kernel ./kernels/4318/m3000_a3.sm_20.64.ptx
Device #1: Kernel ./kernels/4318/markov_le_v1.64.ptx
Device #1: Kernel ./kernels/4318/bzero.64.ptx
Device #2: Kernel ./kernels/4318/m3000_a3.sm_20.64.ptx
Device #2: Kernel ./kernels/4318/markov_le_v1.64.ptx
Device #2: Kernel ./kernels/4318/bzero.64.ptx
Session.Name...: cudaHashcat
Status.........: Running
Input.Mode.....: Mask (?l?l?l?l?l?l?l) [7]
Hash.Target....: File (lm.txt)
Hash.Type......: LM
Time.Started...: Tue Apr 08 07:27:22 2014 (10 secs)
Time.Estimated.: Tue Apr 08 07:27:34 2014 (2 secs)
Speed.GPU.#1...: 328.4 MH/s
Speed.GPU.#2...: 327.4 MH/s
Speed.GPU.#*...: 655.8 MH/s
Recovered......: 0/2 (0.00%) Digests, 0/1 (0.00%) Salts
Progress.......: 6530826240/8031810176 (81.31%)
Rejected.......: 0/6530826240 (0.00%)
HWMon.GPU.#1...: 96% Util, 50c Temp, 1860rpm Fan
HWMon.GPU.#2...: 96% Util, 45c Temp, 1860rpm Fan
Session.Name...: cudaHashcat
Status.........: Exhausted
Input.Mode.....: Mask (?l?l?l?l?l?l?l) [7]
Hash.Target....: File (lm.txt)
Hash.Type......: LM
Time.Started...: Tue Apr 08 07:27:22 2014 (13 secs)
Time.Estimated.: 0 secs
Speed.GPU.#1...: 1067.9 kH/s
Speed.GPU.#2...: 153.9 MH/s
Speed.GPU.#*...: 155.0 MH/s
Recovered......: 0/2 (0.00%) Digests, 0/1 (0.00%) Salts
Progress.......: 8031810176/8031810176 (100.00%)
Rejected.......: 0/8031810176 (0.00%)
HWMon.GPU.#1...: 89% Util, 49c Temp, 1860rpm Fan
HWMon.GPU.#2...: 77% Util, 45c Temp, 1860rpm Fan
Started: Tue Apr 08 07:27:22 2014
Stopped: Tue Apr 08 07:27:36 2014
What am I doing wrong? Thanx!
cudaHashcat64.exe --status -t 64 -a 3 -m 3000 lm.txt -1 ?u?d?s æøåÆØÅ ?l?l?l?l?l?l?l
lm.txt contains the 2 LM hash values. They should be properly extracted.
This is my output - it finished very fast:
cudaHashcat v1.01 starting...
Hashes: 2 total, 1 unique salts, 2 unique digests
Bitmaps: 8 bits, 256 entries, 0x000000ff mask, 1024 bytes
Applicable Optimizers:
* Zero-Byte
* Precompute-Final-Permutation
* Not-Iterated
* Single-Salt
* Brute-Force
* Scalar-Mode
Watchdog: Temperature abort trigger set to 90c
Watchdog: Temperature retain trigger set to 80c
Device #1: GeForce GTX 570, 1280MB, 1464Mhz, 15MCU
Device #2: GeForce GTX 570, 1280MB, 1464Mhz, 15MCU
Device #1: Kernel ./kernels/4318/m3000_a3.sm_20.64.ptx
Device #1: Kernel ./kernels/4318/markov_le_v1.64.ptx
Device #1: Kernel ./kernels/4318/bzero.64.ptx
Device #2: Kernel ./kernels/4318/m3000_a3.sm_20.64.ptx
Device #2: Kernel ./kernels/4318/markov_le_v1.64.ptx
Device #2: Kernel ./kernels/4318/bzero.64.ptx
Session.Name...: cudaHashcat
Status.........: Exhausted
Input.Mode.....: Mask (µ°ÕãÃ┼) [6]
Hash.Target....: File (lm.txt)
Hash.Type......: LM
Time.Started...: Tue Apr 08 07:21:34 2014 (1 sec)
Time.Estimated.: 0 secs
Speed.GPU.#1...: 0 H/s
Speed.GPU.#2...: 0 H/s
Speed.GPU.#*...: 0 H/s
Recovered......: 0/2 (0.00%) Digests, 0/1 (0.00%) Salts
Progress.......: 1/1 (100.00%)
Rejected.......: 0/1 (0.00%)
HWMon.GPU.#1...: 1% Util, 41c Temp, 1800rpm Fan
HWMon.GPU.#2...: 0% Util, 37c Temp, 1830rpm Fan
Started: Tue Apr 08 07:21:34 2014
Stopped: Tue Apr 08 07:21:35 2014
What worries me is the "mask" output, which looks pretty awkward.
I should have [space] in the custom charset: "?u?d?s æøåÆØÅ"
Trying without the [space] the mask output seems allright, but it still finishes too fast I believe:
Hashes: 2 total, 1 unique salts, 2 unique digests
Bitmaps: 8 bits, 256 entries, 0x000000ff mask, 1024 bytes
Applicable Optimizers:
* Zero-Byte
* Precompute-Final-Permutation
* Not-Iterated
* Single-Salt
* Brute-Force
* Scalar-Mode
Watchdog: Temperature abort trigger set to 90c
Watchdog: Temperature retain trigger set to 80c
Device #1: GeForce GTX 570, 1280MB, 1464Mhz, 15MCU
Device #2: GeForce GTX 570, 1280MB, 1464Mhz, 15MCU
Device #1: Kernel ./kernels/4318/m3000_a3.sm_20.64.ptx
Device #1: Kernel ./kernels/4318/markov_le_v1.64.ptx
Device #1: Kernel ./kernels/4318/bzero.64.ptx
Device #2: Kernel ./kernels/4318/m3000_a3.sm_20.64.ptx
Device #2: Kernel ./kernels/4318/markov_le_v1.64.ptx
Device #2: Kernel ./kernels/4318/bzero.64.ptx
Session.Name...: cudaHashcat
Status.........: Running
Input.Mode.....: Mask (?l?l?l?l?l?l?l) [7]
Hash.Target....: File (lm.txt)
Hash.Type......: LM
Time.Started...: Tue Apr 08 07:27:22 2014 (10 secs)
Time.Estimated.: Tue Apr 08 07:27:34 2014 (2 secs)
Speed.GPU.#1...: 328.4 MH/s
Speed.GPU.#2...: 327.4 MH/s
Speed.GPU.#*...: 655.8 MH/s
Recovered......: 0/2 (0.00%) Digests, 0/1 (0.00%) Salts
Progress.......: 6530826240/8031810176 (81.31%)
Rejected.......: 0/6530826240 (0.00%)
HWMon.GPU.#1...: 96% Util, 50c Temp, 1860rpm Fan
HWMon.GPU.#2...: 96% Util, 45c Temp, 1860rpm Fan
Session.Name...: cudaHashcat
Status.........: Exhausted
Input.Mode.....: Mask (?l?l?l?l?l?l?l) [7]
Hash.Target....: File (lm.txt)
Hash.Type......: LM
Time.Started...: Tue Apr 08 07:27:22 2014 (13 secs)
Time.Estimated.: 0 secs
Speed.GPU.#1...: 1067.9 kH/s
Speed.GPU.#2...: 153.9 MH/s
Speed.GPU.#*...: 155.0 MH/s
Recovered......: 0/2 (0.00%) Digests, 0/1 (0.00%) Salts
Progress.......: 8031810176/8031810176 (100.00%)
Rejected.......: 0/8031810176 (0.00%)
HWMon.GPU.#1...: 89% Util, 49c Temp, 1860rpm Fan
HWMon.GPU.#2...: 77% Util, 45c Temp, 1860rpm Fan
Started: Tue Apr 08 07:27:22 2014
Stopped: Tue Apr 08 07:27:36 2014
What am I doing wrong? Thanx!