12-09-2017, 01:31 AM
(This post was last modified: 12-09-2017, 01:34 AM by tacohashcat.)
Using Hashcat 4.0.1 (no beta, whatever is on the main page is what I used) on Windows 10, workload 3, GeForce drivers 388.59, and MSI afterburner push the GPU fan up to 100% and running against the sample hashcat WPA/WPA2 hccapx:
Session..........: hashcat
Status...........: Running
Hash.Type........: WPA/WPA2
Hash.Target......: 8381533406003807685881523 (AP:ae:f5:0f:22:80:1c STA:98:7b:dc:f9:f9:50)
Time.Started.....: Fri Dec 08 17:32:04 2017 (9 mins, 46 secs)
Time.Estimated...: Thu Jan 09 02:15:28 2020 (2 years, 31 days)
Guess.Mask.......: ?1?2?2?2?2?2?2?3 [8]
Guess.Charset....: -1 ?l?d?u, -2 ?l?d, -3 ?l?d*!$@_, -4 Undefined
Guess.Queue......: 1/8 (12.50%)
Speed.Dev.#1.....: 84117 H/s (56.45ms)
Recovered........: 0/1 (0.00%) Digests, 0/1 (0.00%) Salts
Progress.........: 45342720/5533380698112 (0.00%)
Rejected.........: 0/45342720 (0.00%)
Restore.Point....: 696320/89248075776 (0.00%)
Candidates.#1....: E2s8cerd -> Eq6wfane
HWMon.Dev.#1.....: Temp: 54c Fan:100% Util: 99% Core:1695MHz Mem:3504MHz Bus:16
[s]tatus [p]ause [r]esume [b]ypass [c]heckpoint [q]uit =>
I never saw it go above 84kH/s, but I didn't update the status too often. The card reached 99% at that capture, so I wouldn't expect it to top 85kH/s in real world applications. As you can see this was after almost 10 mins running, so it had plenty of time to get going. You could try workload w4, but I didn't want to do this since the card I am using pushes display to my monitor and it may become unresponsive.
I never saw temps go above 55C on the card. This is a small GPU with one fan and an OEM cooler, not FE. Power comes from the motherboard, no PCI-E power connectors needed. No other cards are around to block air to the GPU, and my case has good airflow.
Edit: This is also running whatever the stock clocks are. Afterburner would allow tweaking the overclocking, so you might be able to push a bit extra out of the card.
Edit2: and of course, this is on my GTX 1050.
Session..........: hashcat
Status...........: Running
Hash.Type........: WPA/WPA2
Hash.Target......: 8381533406003807685881523 (AP:ae:f5:0f:22:80:1c STA:98:7b:dc:f9:f9:50)
Time.Started.....: Fri Dec 08 17:32:04 2017 (9 mins, 46 secs)
Time.Estimated...: Thu Jan 09 02:15:28 2020 (2 years, 31 days)
Guess.Mask.......: ?1?2?2?2?2?2?2?3 [8]
Guess.Charset....: -1 ?l?d?u, -2 ?l?d, -3 ?l?d*!$@_, -4 Undefined
Guess.Queue......: 1/8 (12.50%)
Speed.Dev.#1.....: 84117 H/s (56.45ms)
Recovered........: 0/1 (0.00%) Digests, 0/1 (0.00%) Salts
Progress.........: 45342720/5533380698112 (0.00%)
Rejected.........: 0/45342720 (0.00%)
Restore.Point....: 696320/89248075776 (0.00%)
Candidates.#1....: E2s8cerd -> Eq6wfane
HWMon.Dev.#1.....: Temp: 54c Fan:100% Util: 99% Core:1695MHz Mem:3504MHz Bus:16
[s]tatus [p]ause [r]esume [b]ypass [c]heckpoint [q]uit =>
I never saw it go above 84kH/s, but I didn't update the status too often. The card reached 99% at that capture, so I wouldn't expect it to top 85kH/s in real world applications. As you can see this was after almost 10 mins running, so it had plenty of time to get going. You could try workload w4, but I didn't want to do this since the card I am using pushes display to my monitor and it may become unresponsive.
I never saw temps go above 55C on the card. This is a small GPU with one fan and an OEM cooler, not FE. Power comes from the motherboard, no PCI-E power connectors needed. No other cards are around to block air to the GPU, and my case has good airflow.
Edit: This is also running whatever the stock clocks are. Afterburner would allow tweaking the overclocking, so you might be able to push a bit extra out of the card.
Edit2: and of course, this is on my GTX 1050.