Gpu Limit
#3
Thanks for the responce

Yea I've been looking into it more, and your right, amd is a not a good option,
the Cooling option was fans between the cards

I was hoping to use the rx570 becuase of price of cards , the person selling this mining rig has 30 gpu rx570. I could have spare cards

alternative option is 19 nvidia 1080 + board + cpu + ram + psu + cables + mods = the wrong side of $20,000. this is only a cheap project I was getting the mining rig for $3,500 to get my feet wet in password cracking , I went to see the mining rig in his house , he just wants to get rid, all cards are working

I dont really want to spend $20,000+ to be able to try crack some passwords , and as password cracking is more an enthusiast thing, you'll never crack all passwords no matter how big your rig, setting aside the whole rule set etc and varous techniques to increase sucess rates there is a lot of password you just wont crack

I have comtemplated spending $20,000+ on a rig, but while I just dont have $20,000 like its $10 stuck down the side of my couch, in otherwords to spend $20,000+ to be able to crack 20-25%% of passwords, just doesnt seem like a worth while use of money,  and that cracking percent is a generous percentage
Reply


Messages In This Thread
Gpu Limit - by cereal_killer - 01-16-2020, 02:35 AM
RE: Gpu Limit - by undeath - 01-16-2020, 11:36 AM
RE: Gpu Limit - by cereal_killer - 01-16-2020, 03:11 PM
RE: Gpu Limit - by cereal_killer - 01-16-2020, 06:33 PM
RE: Gpu Limit - by undeath - 01-16-2020, 10:44 PM
RE: Gpu Limit - by cereal_killer - 01-17-2020, 12:23 AM
RE: Gpu Limit - by undeath - 01-17-2020, 01:25 AM
RE: Gpu Limit - by pragmatic - 01-17-2020, 01:59 AM
RE: Gpu Limit - by cereal_killer - 01-17-2020, 07:03 PM
RE: Gpu Limit - by NoReply - 01-17-2020, 11:18 PM
RE: Gpu Limit - by cereal_killer - 01-18-2020, 12:28 AM
RE: Gpu Limit - by pragmatic - 01-18-2020, 01:32 AM
RE: Gpu Limit - by cereal_killer - 01-18-2020, 03:13 AM
RE: Gpu Limit - by philsmd - 01-18-2020, 01:20 PM
RE: Gpu Limit - by cereal_killer - 01-18-2020, 06:28 PM