Posts: 7
	Threads: 1
	Joined: Nov 2019
	
	
 
	
		
		
 11-23-2019, 03:48 AM 
(This post was last modified: 11-23-2019, 03:50 AM by razgrad.)
 
		11-23-2019, 03:48 AM 
(This post was last modified: 11-23-2019, 03:50 AM by razgrad.)
		
	 
	
		I have a rig with 3 x 1080 and 
when i start hashcat... few minutes later come this message :
Driver temperature threshold met on GPU #4. Expect reduced performance.
windows shut down or restart
what is the problem ?
I use a asus mainbaord bequiet 600 & 500 watt, 4 gb ram 
3 x 1080 geforce , driver sucessfull installed...
thank you
	
	
	
	
	
 
 
	
	
	
		
	Posts: 389
	Threads: 1
	Joined: Nov 2017
	
	
 
	
	
		It's exactly what it states. GPU on slot 4 is reaching a very hot temperature and is reducing its performance due to it reaching the default 90ºC Temp. 
You probably have non-reference design cards stacked ontop of each other with the backplates still on causing it to overheat. You need better cooling solutions or space the cards out more.
	
	
	
	
	
 
 
	
	
	
		
	Posts: 7
	Threads: 1
	Joined: Nov 2019
	
	
 
	
		
		
		11-23-2019, 12:49 PM 
(This post was last modified: 11-23-2019, 01:05 PM by razgrad.)
		
	 
	
		the distance per card is 15 cm and in a cool room, that should not actually happen. 
ist it possoble to reduce the attitude that it does not overheat?
	
	
	
	
	
 
 
	
	
	
		
	Posts: 2,301
	Threads: 11
	Joined: Jul 2010
	
	
 
	
	
		Something with your cooling/airflow is bad.
	
	
	
	
	
 
 
	
	
	
		
	Posts: 389
	Threads: 1
	Joined: Nov 2017
	
	
 
	
	
		Run it with a lower profile such as -w 1 or -w 2 and fix your fan curve to have them run at 100%
	
	
	
	
	
 
 
	
	
	
		
	Posts: 7
	Threads: 1
	Joined: Nov 2019
	
	
 
	
	
		ok profile is -w 3 i try -w2 with 100% fan and report tomorrow
	
	
	
	
	
 
 
	
	
	
		
	Posts: 7
	Threads: 1
	Joined: Nov 2019
	
	
 
	
		
		
		11-25-2019, 01:45 AM 
(This post was last modified: 11-25-2019, 01:46 AM by razgrad.)
		
	 
	
		so ive try again here is the log, after 30 minutes, follow error comes :
[s]tatus [p]ause [b]ypass [c]heckpoint [q]uit => 
nvmlDeviceGetTemperature(): Unknown Error
nvmlDeviceGetTemperature(): Unknown Error
clGetEventInfo(): CL_OUT_OF_RESOURCES
clGetEventInfo(): CL_OUT_OF_RESOURCES RCES
clEnqueueReadBuffer(): CL_DEVICE_NOT_FOUND
nvmlDeviceGetUtilizationRates(): Unknown Error
cvmlDeviceGetUtilizationRates(
nvmlDeviceGetUtilizationRates(): Unknown Error
nvmlDeviceGetFanSpeed(): Unknown Error
nvmlDeviceGetClockInfo(): Unknown Error
nvmlDeviceGetClockInfo(): Unknown Error
nvmlDeviceGetCurrPcieLinkWidth(): Unknown Error
nvmlDeviceGetFanSpeed(): Unknown Error
nvmlDeviceGetClockInfo(): Unknown Error
nvmlDeviceGetClockInfo(): Unknown Error
nvmlDeviceGetCurrPcieLinkWidth(): Unknown Error
Session..........: hashcat
Status...........: Error
Hash.Type........: DES (PT = $salt, key = $pass
.....
	
	
	
	
	
 
 
	
	
	
		
	Posts: 2,301
	Threads: 11
	Joined: Jul 2010
	
	
 
	
	
		That looks like a card stopped functioning during the cracking session.
	
	
	
	
	
 
 
	
	
	
		
	Posts: 7
	Threads: 1
	Joined: Nov 2019
	
	
 
	
		
		
 11-25-2019, 04:49 PM
 
		11-25-2019, 04:49 PM 
		
	 
	
		i think i try ubuntu, hope that is an windows problem or what is your opinion?
thank you....
	
	
	
	
	
 
 
	
	
	
		
	Posts: 2,301
	Threads: 11
	Joined: Jul 2010
	
	
 
	
	
		Looks rather like a hardware error of some kind.