GTX 1080 FE Temperature & Power Requirements
#5
(06-06-2016, 06:53 PM)epixoip Wrote: Something isn't right then, but I'm not sure what. I assume you didn't remove the second half of the backplate to allow airflow into the card on the right (that's why it's removable), but that wouldn't explain the high temps for the GPU on the left. Are you positive the GPU fans are actually running at 100%? Can you hear them get louder when you set the fan speed?

Hi epixoip,

I didn't remove the second half of the backplate on both cards. I'm sure that the GPU fans are running at 100% as I can hear them getting louder when I forced them to run at 100%

Code:
PS C:\hashcat-3.00> .\hashcat64.exe -m0 -a3 --status --status-timer=5 -o C:\source\cracked_spbb_2016.txt --remove -w3 C:\source\spbbMD5.txt -1 ?u?l?d -2 ?l?d?s ?1?2?2?2?2?2?2?2
hashcat (v3.00-beta-145-g069634a) starting...

Device #1: WARNING: not native intel opencl runtime, expect massive speed loss
          You can use --force to override this but do not post error reports if you do so
Device #1: Intel(R) Core(TM) i5-4440 CPU @ 3.10GHz, skipped
Device #2: Intel(R) Core(TM) i5-4440 CPU @ 3.10GHz, skipped
Device #3: GeForce GTX 1080, 2048/8192 MB allocatable, 20MCU
Device #4: GeForce GTX 1080, 2048/8192 MB allocatable, 20MCU

Hashes: 9119 hashes; 9119 unique digests, 1 unique salts
Bitmaps: 16 bits, 65536 entries, 0x0000ffff mask, 262144 bytes, 5/13 rotates
Applicable Optimizers:
* Zero-Byte
* Precompute-Init
* Precompute-Merkle-Demgard
* Meet-In-The-Middle
* Early-Skip
* Not-Salted
* Not-Iterated
* Single-Salt
* Brute-Force
* Raw-Hash
Watchdog: Temperature abort trigger set to 90c
Watchdog: Temperature retain trigger disabled


Session.Name...: hashcat
Status.........: Running
Input.Mode.....: Mask (?1?2?2?2?2?2?2?2) [8]
Hash.Target....: File (C:\source\spbbMD5.txt)
Hash.Type......: MD5
Time.Started...: Tue Jun 07 00:56:26 2016 (4 secs)
Time.Estimated.: Tue Jun 07 05:06:47 2016 (4 hours, 10 mins)
Speed.Dev.#3...: 15533.6 MH/s (102.07ms)
Speed.Dev.#4...: 15210.9 MH/s (102.24ms)
Speed.Dev.#*...: 30744.5 MH/s
Recovered......: 0/9119 (0.00%) Digests, 0/1 (0.00%) Salts
Recovered/Time.: CUR:N/A,N/A,N/A AVG:0.00,0.00,0.00 (Min,Hour,Day)
Progress.......: 134432686080/461673901660518 (0.03%)
Rejected.......: 0/134432686080 (0.00%)
Restore.Point..: 0/1564031349 (0.00%)
HWMon.Dev.#3...: Temp: 49c Fan:100% Util: 98% Core:1788Mhz Mem:5005Mhz Lanes:4
HWMon.Dev.#4...: Temp: 44c Fan:100% Util: 98% Core:1750Mhz Mem:5005Mhz Lanes:8

...
...
...

Session.Name...: hashcat
Status.........: Running
Input.Mode.....: Mask (?1?2?2?2?2?2?2?2) [8]
Hash.Target....: File (C:\source\spbbMD5.txt)
Hash.Type......: MD5
Time.Started...: Tue Jun 07 00:56:26 2016 (5 mins, 45 secs)
Time.Estimated.: Tue Jun 07 05:16:10 2016 (4 hours, 13 mins)
Speed.Dev.#3...: 14845.8 MH/s (106.51ms)
Speed.Dev.#4...: 14780.5 MH/s (105.60ms)
Speed.Dev.#*...: 29626.2 MH/s
Recovered......: 0/9119 (0.00%) Digests, 0/1 (0.00%) Salts
Recovered/Time.: CUR:0,N/A,N/A AVG:0.00,0.00,0.00 (Min,Hour,Day)
Progress.......: 10326242375680/461673901660518 (2.24%)
Rejected.......: 0/10326242375680 (0.00%)
Restore.Point..: 28103680/1564031349 (1.80%)
HWMon.Dev.#3...: Temp: 87c Fan:100% Util: 98% Core:1709Mhz Mem:5005Mhz Lanes:4
HWMon.Dev.#4...: Temp: 72c Fan:100% Util: 98% Core:1697Mhz Mem:5005Mhz Lanes:8




Session.Name...: hashcat
Status.........: Aborted
Input.Mode.....: Mask (?1?2?2?2?2?2?2?2) [8]
Hash.Target....: File (C:\source\spbbMD5.txt)
Hash.Type......: MD5
Time.Started...: Tue Jun 07 00:56:26 2016 (5 mins, 48 secs)
Time.Estimated.: Tue Jun 07 05:16:17 2016 (4 hours, 13 mins)
Speed.Dev.#3...: 14836.9 MH/s (106.50ms)
Speed.Dev.#4...: 14775.5 MH/s (105.59ms)
Speed.Dev.#*...: 29612.4 MH/s
Recovered......: 0/9119 (0.00%) Digests, 0/1 (0.00%) Salts
Recovered/Time.: CUR:0,N/A,N/A AVG:0.00,0.00,0.00 (Min,Hour,Day)
Progress.......: 10414249359360/461673901660518 (2.26%)
Rejected.......: 0/10414249359360 (0.00%)
Restore.Point..: 28103680/1564031349 (1.80%)

Started: Tue Jun 07 00:56:26 2016
Stopped: Tue Jun 07 01:02:19 2016
PS C:\hashcat-3.00>


Messages In This Thread
RE: GTX 1080 FE Temperature & Power Requirements - by azren - 06-06-2016, 07:09 PM