Hi atom
Big thanks for your wonderful software, but I have a strange problem with latest ocl 0.8 and ATI 11.1
I was used to use hc 0.6 and 2 6990 cards and I get almost always the 8260 speed and 33 hours maximum for a SL3 code. But today I wanted to upgrade to hashcat 0.8, and as I had issues with unbalanced speed when upgrading ATI drivers form 11.6 to 11.1, then I thought that I need to completely format the PC and I did this, but I am having again the same speed issue. I saw some thread about the same issue but one of the threads was closed so I am posting here the problem. Look at the below log:
Progress.....: 383385600000/1000000000000000 (0.04%)
Speed.GPU.#1.: 2069.6M/s
Speed.GPU.#2.: 2068.2M/s
Speed.GPU.#3.: 2071.1M/s
Speed.GPU.#4.: 2069.1M/s
Speed.GPU.#*.: 8277.9M/s
HWMon.GPU.#1.: 99% GPU, 73c Temp
HWMon.GPU.#2.: 99% GPU, 76c Temp
HWMon.GPU.#3.: 99% GPU, 76c Temp
HWMon.GPU.#4.: 99% GPU, 76c Temp
[s]tatus [p]ause [r]esume [q]uit =>
I tried some recommendation read on the forum about adding this command: --restore-timer=30 and --restore-timer=60 but none of them is working. How can I get 99% GPU usage as I used to get at ocl 0.6?
Or it seems that the speed is not unbalanced, but it doesn't improve much from 8260 in ocl 0.6 to 8277 in ocl 0.8
And I have scanned from 0 to 34 % with OCL 0.6. Can I continue from 34% with ocl 0.8 and the new --pw-skip command?
thanks
Big thanks for your wonderful software, but I have a strange problem with latest ocl 0.8 and ATI 11.1
I was used to use hc 0.6 and 2 6990 cards and I get almost always the 8260 speed and 33 hours maximum for a SL3 code. But today I wanted to upgrade to hashcat 0.8, and as I had issues with unbalanced speed when upgrading ATI drivers form 11.6 to 11.1, then I thought that I need to completely format the PC and I did this, but I am having again the same speed issue. I saw some thread about the same issue but one of the threads was closed so I am posting here the problem. Look at the below log:
Progress.....: 383385600000/1000000000000000 (0.04%)
Speed.GPU.#1.: 2069.6M/s
Speed.GPU.#2.: 2068.2M/s
Speed.GPU.#3.: 2071.1M/s
Speed.GPU.#4.: 2069.1M/s
Speed.GPU.#*.: 8277.9M/s
HWMon.GPU.#1.: 99% GPU, 73c Temp
HWMon.GPU.#2.: 99% GPU, 76c Temp
HWMon.GPU.#3.: 99% GPU, 76c Temp
HWMon.GPU.#4.: 99% GPU, 76c Temp
[s]tatus [p]ause [r]esume [q]uit =>
I tried some recommendation read on the forum about adding this command: --restore-timer=30 and --restore-timer=60 but none of them is working. How can I get 99% GPU usage as I used to get at ocl 0.6?
Or it seems that the speed is not unbalanced, but it doesn't improve much from 8260 in ocl 0.6 to 8277 in ocl 0.8
And I have scanned from 0 to 34 % with OCL 0.6. Can I continue from 34% with ocl 0.8 and the new --pw-skip command?
thanks