I was using a remoted shell from my mobile, not so easy to cut & paste.
BTW I used another machine with a proper console and a Quadro GPU on it, used the same hash and here is the complete session, again password was not found:
---------------------
C:\h>hashcat64.exe -m 9600 -a 3 test.hsh passpas?l
hashcat (v5.1.0) starting...
* Device #2: WARNING! Kernel exec timeout is not disabled.
This may cause "CL_OUT_OF_RESOURCES" or related errors.
To disable the timeout, see: https://hashcat.net/q/timeoutpatch
OpenCL Platform #1: Intel(R) Corporation
========================================
* Device #1: Intel(R) Core(TM) i5-4590 CPU @ 3.30GHz, skipped.
OpenCL Platform #2: NVIDIA Corporation
======================================
* Device #2: Quadro K2200, 1024/4096 MB allocatable, 5MCU
Hashes: 1 digests; 1 unique digests, 1 unique salts
Bitmaps: 16 bits, 65536 entries, 0x0000ffff mask, 262144 bytes, 5/13 rotates
Applicable optimizers:
* Zero-Byte
* Single-Hash
* Single-Salt
* Brute-Force
* Slow-Hash-SIMD-LOOP
Minimum password length supported by kernel: 0
Maximum password length supported by kernel: 256
Watchdog: Temperature abort trigger set to 90c
The wordlist or mask that you are using is too small.
This means that hashcat cannot use the full parallel power of your device(s).
Unless you supply more work, your cracking speed will drop.
For tips on supplying more work, see: https://hashcat.net/faq/morework
Approaching final keyspace - workload adjusted.
Cracking performance lower than expected?
* Append -w 3 to the commandline.
This can cause your screen to lag.
* Update your OpenCL runtime / driver the right way:
https://hashcat.net/faq/wrongdriver
* Create more work items to make use of your parallelization power:
https://hashcat.net/faq/morework
Session..........: hashcat
Status...........: Exhausted
Hash.Type........: MS Office 2013
Hash.Target......: $office$*2013*100000*256*16*8b35c1c9d47628bcd8e6fd3...ea52f4
Time.Started.....: Fri Dec 14 18:13:59 2018 (8 secs)
Time.Estimated...: Fri Dec 14 18:14:07 2018 (0 secs)
Guess.Mask.......: passpas?l [9]
Guess.Queue......: 1/1 (100.00%)
Speed.#2.........: 3 H/s (0.17ms) @ Accel:32 Loops:8 Thr:1024 Vec:1
Recovered........: 0/1 (0.00%) Digests, 0/1 (0.00%) Salts
Progress.........: 26/26 (100.00%)
Rejected.........: 0/26 (0.00%)
Restore.Point....: 26/26 (100.00%)
Restore.Sub.#2...: Salt:0 Amplifier:0-1 Iteration:99992-100000
Candidates.#2....: passpass -> passpasq
Hardware.Mon.#2..: Temp: 60c Fan: 47% Util: 1% Core:1124MHz Mem:2505MHz Bus:16
Started: Fri Dec 14 18:13:03 2018
Stopped: Fri Dec 14 18:14:09 2018
---------------------
Info is:
C:\h>hashcat64.exe -I
hashcat (v5.1.0) starting...
OpenCL Info:
Platform ID #1
Vendor : Intel(R) Corporation
Name : Intel(R) OpenCL
Version : OpenCL 1.2
Device ID #1
Type : CPU
Vendor ID : 8
Vendor : Intel(R) Corporation
Name : Intel(R) Core(TM) i5-4590 CPU @ 3.30GHz
Version : OpenCL 1.2 (Build 99)
Processor(s) : 4
Clock : 3300
Memory : 3010/12040 MB allocatable
OpenCL Version : OpenCL C 1.2
Driver Version : 4.2.0.99
Platform ID #2
Vendor : NVIDIA Corporation
Name : NVIDIA CUDA
Version : OpenCL 1.2 CUDA 9.1.84
Device ID #2
Type : GPU
Vendor ID : 32
Vendor : NVIDIA Corporation
Name : Quadro K2200
Version : OpenCL 1.2 CUDA
Processor(s) : 5
Clock : 1124
Memory : 1024/4096 MB allocatable
OpenCL Version : OpenCL C 1.2
Driver Version : 391.74
BTW I used another machine with a proper console and a Quadro GPU on it, used the same hash and here is the complete session, again password was not found:
---------------------
C:\h>hashcat64.exe -m 9600 -a 3 test.hsh passpas?l
hashcat (v5.1.0) starting...
* Device #2: WARNING! Kernel exec timeout is not disabled.
This may cause "CL_OUT_OF_RESOURCES" or related errors.
To disable the timeout, see: https://hashcat.net/q/timeoutpatch
OpenCL Platform #1: Intel(R) Corporation
========================================
* Device #1: Intel(R) Core(TM) i5-4590 CPU @ 3.30GHz, skipped.
OpenCL Platform #2: NVIDIA Corporation
======================================
* Device #2: Quadro K2200, 1024/4096 MB allocatable, 5MCU
Hashes: 1 digests; 1 unique digests, 1 unique salts
Bitmaps: 16 bits, 65536 entries, 0x0000ffff mask, 262144 bytes, 5/13 rotates
Applicable optimizers:
* Zero-Byte
* Single-Hash
* Single-Salt
* Brute-Force
* Slow-Hash-SIMD-LOOP
Minimum password length supported by kernel: 0
Maximum password length supported by kernel: 256
Watchdog: Temperature abort trigger set to 90c
The wordlist or mask that you are using is too small.
This means that hashcat cannot use the full parallel power of your device(s).
Unless you supply more work, your cracking speed will drop.
For tips on supplying more work, see: https://hashcat.net/faq/morework
Approaching final keyspace - workload adjusted.
Cracking performance lower than expected?
* Append -w 3 to the commandline.
This can cause your screen to lag.
* Update your OpenCL runtime / driver the right way:
https://hashcat.net/faq/wrongdriver
* Create more work items to make use of your parallelization power:
https://hashcat.net/faq/morework
Session..........: hashcat
Status...........: Exhausted
Hash.Type........: MS Office 2013
Hash.Target......: $office$*2013*100000*256*16*8b35c1c9d47628bcd8e6fd3...ea52f4
Time.Started.....: Fri Dec 14 18:13:59 2018 (8 secs)
Time.Estimated...: Fri Dec 14 18:14:07 2018 (0 secs)
Guess.Mask.......: passpas?l [9]
Guess.Queue......: 1/1 (100.00%)
Speed.#2.........: 3 H/s (0.17ms) @ Accel:32 Loops:8 Thr:1024 Vec:1
Recovered........: 0/1 (0.00%) Digests, 0/1 (0.00%) Salts
Progress.........: 26/26 (100.00%)
Rejected.........: 0/26 (0.00%)
Restore.Point....: 26/26 (100.00%)
Restore.Sub.#2...: Salt:0 Amplifier:0-1 Iteration:99992-100000
Candidates.#2....: passpass -> passpasq
Hardware.Mon.#2..: Temp: 60c Fan: 47% Util: 1% Core:1124MHz Mem:2505MHz Bus:16
Started: Fri Dec 14 18:13:03 2018
Stopped: Fri Dec 14 18:14:09 2018
---------------------
Info is:
C:\h>hashcat64.exe -I
hashcat (v5.1.0) starting...
OpenCL Info:
Platform ID #1
Vendor : Intel(R) Corporation
Name : Intel(R) OpenCL
Version : OpenCL 1.2
Device ID #1
Type : CPU
Vendor ID : 8
Vendor : Intel(R) Corporation
Name : Intel(R) Core(TM) i5-4590 CPU @ 3.30GHz
Version : OpenCL 1.2 (Build 99)
Processor(s) : 4
Clock : 3300
Memory : 3010/12040 MB allocatable
OpenCL Version : OpenCL C 1.2
Driver Version : 4.2.0.99
Platform ID #2
Vendor : NVIDIA Corporation
Name : NVIDIA CUDA
Version : OpenCL 1.2 CUDA 9.1.84
Device ID #2
Type : GPU
Vendor ID : 32
Vendor : NVIDIA Corporation
Name : Quadro K2200
Version : OpenCL 1.2 CUDA
Processor(s) : 5
Clock : 1124
Memory : 1024/4096 MB allocatable
OpenCL Version : OpenCL C 1.2
Driver Version : 391.74