hcxtools - solution for capturing wlan traffic and conversion to hashcat formats

[ZerBea]

Normally we wait up to 2 minutes to get a GPX fix. If we didn't get it, we deactivate GPS.

EDIT:
I pushed another update. Now we leave the GPS fix loop if we didn't receive a GPRMC sentence within the first 120 received sentences.

If we got no fix from the device, output looks like this (after the period of at least 2 minutes):
$ sudo hcxdumptool -i wlp3s0f0u2 --filtermode=1 --filterlist_ap=$HOME/Source/raspberry/filterlistap --filterlist_client=$HOME/Source/raspberry/filterlistap -o wpatst.pcapng --enable_status=1 --gps=/dev/ttyACM0
initialization...
waiting up to 2 minutes seconds to get GPS fix
GPS failed

start capturing (stop with ctrl+c)
NMEA 0183 RMC SENTENCE..: N/A
INTERFACE NAME..........: wlp3s0f0u2
INTERFACE HARDWARE MAC..: f81a67077d0e
DRIVER..................: ath9k_htc
DRIVER VERSION..........: 5.3.7-arch1-2-ARCH
DRIVER FIRMWARE VERSION.: 1.4
ERRORMAX................: 100 errors
FILTERLIST ACCESS POINT.: 2 entries
FILTERLIST CLIENT.......: 2 entries
FILTERMODE..............: 1
PREDEFINED ACCESS POINT.: 0 entries
MAC ACCESS POINT........: 0024fb4ff852 (incremented on every new client)
MAC CLIENT..............: b025aac72741
REPLAYCOUNT.............: 62055
ANONCE..................: e40324dcb9b9756550c299aefeb303b2e9b9e5c0813022ec3b82896d0397286e
SNONCE..................: 63d1afb26a112876a5905918510f06e7b50e969ff97695f12f54b0882106ca12


If we have a fix, output looks like this:
$ sudo hcxdumptool -i wlp3s0f0u2 --filtermode=1 --filterlist_ap=$HOME/Source/raspberry/filterlistap --filterlist_client=$HOME/Source/raspberry/filterlistap -o wpatst.pcapng --enable_status=1 --gps=/dev/ttyACM0
initialization...
waiting up to 2 minutes seconds to get GPS fix

start capturing (stop with ctrl+c)
NMEA 0183 RMC SENTENCE..: 091201.00,A,5010.15472,N,00642.51819,E,0.105,,311019,,,A*77
INTERFACE NAME..........: wlp3s0f0u2
INTERFACE HARDWARE MAC..: f81a67077d0e
DRIVER..................: ath9k_htc
DRIVER VERSION..........: 5.3.7-arch1-2-ARCH
DRIVER FIRMWARE VERSION.: 1.4
ERRORMAX................: 100 errors
FILTERLIST ACCESS POINT.: 2 entries
FILTERLIST CLIENT.......: 2 entries
FILTERMODE..............: 1
PREDEFINED ACCESS POINT.: 0 entries
MAC ACCESS POINT........: 18421dd1f644 (incremented on every new client)
MAC CLIENT..............: b025aa72aee8
REPLAYCOUNT.............: 64626
ANONCE..................: 2784a27da917a4f61d5ae39b88cadd92e7db9edf0ca08fe22a84b67863e97fc6
SNONCE..................: ab5707d533d899b19258f9ea44abbb84970ad8c776b0172c3d0e9fbe43427d67

Do we get a NMEA 0183 recommended minimum sentence (starting with: $GPRMC):
$GPRMC,091201.00,A,5010.15472,N,00642.51819,E,0.105,,311019,,,A*77
running this command:
cat /dev/ttyUSB0

hcxdumptool doesn't set the device to NMEA 0183. That must be done by user.

Examples of the most common sentences can be found here:
https://en.wikipedia.org/wiki/NMEA_0183

BTW:
hcxpcaptool isn't ready for hcxdumptool v6.0.0. There is still some work to do (on both tools).
I pushed this early alfa to allow wifite2 to test the new features:
https://github.com/kimocoder/wifite2/iss...-548249943