GTX 1070 + GTX 980 = ???
#1
GTX 1070 was running hashcat fine in an old desktop. Added a GTX 980, and hashcat couldn't see either device.

Code:
$ hashcat --benchmark                                                                                                                                                                            [26/26] hashcat (v6.2.6) starting in benchmark mode Benchmarking uses hand-optimized kernel code by default. You can use it in your cracking session by setting the -O option. Note: Using optimized kernel code limits the maximum supported password length. To disable the optimized kernel code in benchmark mode, use the -w option. clGetPlatformIDs(): CL_PLATFORM_NOT_FOUND_KHR ATTENTION! No OpenCL, HIP or CUDA compatible platform found. You are probably missing the OpenCL, CUDA or HIP runtime installation. * AMD GPUs on Linux require this driver:   "AMDGPU" (21.50 or later) and "ROCm" (5.0 or later) * Intel CPUs require this runtime:   "OpenCL Runtime for Intel Core and Intel Xeon Processors" (16.1.1 or later) * NVIDIA GPUs require this runtime and/or driver (both):   "NVIDIA Driver" (440.64 or later)   "CUDA Toolkit" (9.0 or later)

Current state: Host was downgraded to Debian 11 with a fresh install. Successfully installed CUDA toolkit + NVIDIA driver.

Code:
$ sudo nvidia-smi Thu Aug 24 17:06:59 2023 +---------------------------------------------------------------------------------------+ | NVIDIA-SMI 535.86.10              Driver Version: 535.86.10    CUDA Version: 12.2    | |-----------------------------------------+----------------------+----------------------+ | GPU  Name                Persistence-M | Bus-Id        Disp.A | Volatile Uncorr. ECC | | Fan  Temp  Perf          Pwr:Usage/Cap |        Memory-Usage | GPU-Util  Compute M. | |                                        |                      |              MIG M. | |=========================================+======================+======================| |  0  NVIDIA GeForce GTX 1070        Off | 00000000:01:00.0 Off |                  N/A | |  0%  48C    P0              35W / 151W |      0MiB /  8192MiB |      0%      Default | |                                        |                      |                  N/A | +-----------------------------------------+----------------------+----------------------+ +---------------------------------------------------------------------------------------+ | Processes:                                                                            | |  GPU  GI  CI        PID  Type  Process name                            GPU Memory | |        ID  ID                                                            Usage      | |=======================================================================================| |  No running processes found                                                          | +---------------------------------------------------------------------------------------+

This sees the 1070 but not the 980; however both devices register with the OS.

Code:
$ lspci | grep -F NVIDIA 01:00.0 VGA compatible controller: NVIDIA Corporation GP104 [GeForce GTX 1070] (rev a1) 01:00.1 Audio device: NVIDIA Corporation GP104 High Definition Audio Controller (rev a1) 03:00.0 VGA compatible controller: NVIDIA Corporation GM204 [GeForce GTX 980] (rev a1) 03:00.1 Audio device: NVIDIA Corporation GM204 High Definition Audio Controller (rev a1)

Perhaps this is more of an NVIDIA issue than a hashcat issue; though I'm curious about:

1. Why hashcat stopped seeing the GTX 1070?
2. Why CUDA + NVIDIA don't see the GTX 980?
Reply


Messages In This Thread
GTX 1070 + GTX 980 = ??? - by bikes - 08-25-2023, 12:11 AM
RE: GTX 1070 + GTX 980 = ??? - by slyexe - 08-25-2023, 03:38 PM
RE: GTX 1070 + GTX 980 = ??? - by bikes - 08-25-2023, 11:59 PM