hcxtools - solution for capturing wlan traffic and conversion to hashcat formats
Also here is what I see in dmesg

[10381.689021] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[10381.689125] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[10381.689177] usb usb1: Product: xHCI Host Controller
[10381.689412] usb usb1: Manufacturer: Linux 3.4.113-lineageos-g2c0e9edc xhci-hcd
[10381.689509] usb usb1: SerialNumber: xhci-hcd
[10381.689662] usb usb1: parent xhci-hcd should not be sleeping
[10381.691200] xHCI xhci_add_endpoint called for root hub
[10381.691210] xHCI xhci_check_bandwidth called for root hub
[10381.691486] hub 1-0:1.0: USB hub found
[10381.691593] hub 1-0:1.0: 1 port detected
[10381.692148] xhci-hcd xhci-hcd: xHCI Host Controller
[10381.692211] xhci-hcd xhci-hcd: new USB bus registered, assigned bus number 2
[10381.692300] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[10381.692412] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[10381.692468] usb usb2: Product: xHCI Host Controller
[10381.692843] usb usb2: Manufacturer: Linux 3.4.113-lineageos-g2c0e9edc xhci-hcd
[10381.692894] usb usb2: SerialNumber: xhci-hcd
[10381.693065] usb usb2: parent xhci-hcd should not be sleeping
[10381.693883] xHCI xhci_add_endpoint called for root hub
[10381.693887] xHCI xhci_check_bandwidth called for root hub
[10381.694174] hub 2-0:1.0: USB hub found
[10381.694290] hub 2-0:1.0: 1 port detected
[10382.460783] usb 1-1: new high-speed USB device number 2 using xhci-hcd
[10382.488740] usb 1-1: New USB device found, idVendor=0cf3, idProduct=9271
[10382.488781] usb 1-1: New USB device strings: Mfr=16, Product=32, SerialNumber=48
[10382.488846] usb 1-1: Product: USB2.0 WLAN
[10382.488880] usb 1-1: Manufacturer: ATHEROS
[10382.488944] usb 1-1: SerialNumber: 12345
[10382.503565] usb 1-1: ath9k_htc: Firmware htc_9271.fw requested
[10382.787849] usb 1-1: ath9k_htc: Transferred FW: htc_9271.fw, size: 51272
[10383.033229] ath9k_htc 1-1:1.0: ath9k_htc: HTC initialized with 33 credits
[10383.292559] ath9k_htc 1-1:1.0: ath9k_htc: FW Version: 1.3
[10383.292614] ath: EEPROM regdomain: 0x809c
[10383.292617] ath: EEPROM indicates we should expect a country code
[10383.292621] ath: doing EEPROM country->regdmn map search
[10383.292624] ath: country maps to regdmn code: 0x52
[10383.292627] ath: Country alpha2 being used: CN
[10383.292630] ath: Regpair used: 0x52
[10383.297940] ieee80211 phy7: Atheros AR9271 Rev:1
[10383.298394] cfg80211: Calling CRDA for country: CN
[10383.300250] cfg80211: Current regulatory domain intersected:
[10383.300316] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[10383.300392] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[10383.300487] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (600 mBi, 2300 mBm)
[10383.300529] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (600 mBi, 2300 mBm)
[10383.300603] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (600 mBi, 3000 mBm)
[10383.300683] cfg80211: (57240000 KHz - 59400000 KHz @ 2160000 KHz), (N/A, 2800 mBm)
[10383.300787] cfg80211: (59400000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
[10383.302426] Registered led device: ath9k_htc-phy7
[10384.300496] init: Starting service 'su_daemon'...
[10384.318380] init: Service 'su_daemon' (pid 26083) exited with status 0
[10384.318436] init: Service 'su_daemon' (pid 26083) killing any children in process group
[10384.318578] init: Untracked pid 26085 exited with status 1
[10385.515171] msm_thermalConfusedtore_cc_enabled Core control disabled
[10385.520364] msm_thermalConfusedtore_cc_enabled Core control enabled
[10385.521442] msm_thermalConfusedtore_cc_enabled Core control disabled
[10385.533830] msm_thermalConfusedtore_cc_enabled Core control enabled

When I run makemonnb I see:
[10441.201188] [11:26:02.014539] [0000012396713AA2] [MC_Th] wlan: [E :HDP] hdd_tx_rx_pkt_cnt_stat_timer_handler: Disable split scan
[10443.748652] init: Starting service 'su_daemon'...
[10443.779344] init: Untracked pid 26221 exited with status 1
[10443.779590] init: Service 'su_daemon' (pid 26219) exited with status 0
[10443.779759] init: Service 'su_daemon' (pid 26219) killing any children in process group
[10444.143353] [11:26:04.956707] [0000012399CF3132] [wpa_s] wlan: [E :HDD] wlan_hdd_get_frame_logs: Frame Logging not init!
[10448.785875] init: Starting service 'su_daemon'...
[10448.854015] init: Service 'su_daemon' (pid 26224) exited with status 0
[10448.855960] init: Service 'su_daemon' (pid 26224) killing any children in process group
[10448.859087] init: Untracked pid 26226 exited with status 1

sudo iw dev wlan1 info gives me:
Interface wlan1
ifindex 30
type monitor
wiphy 7
Reply


Messages In This Thread
wlandump-ng vs hcxdumptool - by hulley - 02-10-2018, 10:26 PM
RE: hcxtools - solution for capturing wlan traffic and conversion to hashcat formats - by taxil - 04-19-2018, 08:29 PM