ERROR: clCreateContext(): CL_UNKNOWN_ERROR

[Predator]

I installed the following and after that it worked again.

nvidia-libopencl1
libnvidia-ptxjitcompiler
libnvidia-encode1

Probably only the libnvidia-encode1 that's needed but now it works again.

Thanks

[kiara]

Predator, I've found a solution! I suppose you are running Debian or Ubuntu based system...
1. If you don't have it already - install synaptic

Code:

sudo apt-get update && sudo apt-get install synaptic

2. Open Synaptic and do a search for packages with version "367.44-1" , than install all of them without the package "libgl1-nvidia-glx"
3. At last I have installed  :

Code:

diffstat (1.61-1)
libegl1-nvidia (367.44-1)
libgles1-nvidia (367.44-1)
libgles2-nvidia (367.44-1)
libnvidia-egl-wayland (367.44-1)
libnvidia-encode1 (367.44-1)
libnvidia-fbc1 (367.44-1)
libnvidia-ifr1 (367.44-1)
libnvidia-ptxjitcompiler (367.44-1)
module-assistant (0.11.9)
nvidia-kernel-source (367.44-1)
nvidia-libopencl1 (367.44-1)
nvidia-smi (367.44-1)
quilt (0.63-5)

and removed:

Code:

nvidia-smi:i386
ocl-icd-libopencl1

The result:

Code:

hashcat -m 2500 -b
hashcat (v3.10) starting in benchmark-mode...

OpenCL Platform #1: NVIDIA Corporation
======================================
- Device #1: GeForce GTX 750 Ti, 499/1999 MB allocatable, 5MCU

OpenCL Platform #2: Mesa, skipped! No OpenCL compatible devices found

Hashtype: WPA/WPA2

Speed.Dev.#1.:    71542 H/s (89.15ms)

Started: Wed Sep 21 03:09:41 2016
Stopped: Wed Sep 21 03:09:51 2016

thanks for the update

[hackerentreprise]

HELLO! 

my operating system which I am trying to run the hashcat is Windowns 10 ANNIVERSARY UPDATE.

Apparently, I am with all the minimum requirements to run this program, however, when running (adiministrador), configure all the parameter settings as hash type WPA / WPA2, and wordlist. however when you click SEEK END DESTROY. I open a pront window with the following initial parameters:


hashcat (v3.10) starting...
OpenCL Platform #1: Intel(R) Corporation
========================================
- Device #1: Intel(R) Core(TM)2 Duo CPU E4500 @ 2.20GHz, 509/2039 MB allocatable, 2MCU
Hashes: 1 hashes; 1 unique digests, 1 unique salts
Bitmaps: 16 bits, 65536 entries, 0x0000ffff mask, 262144 bytes, 5/13 rotates
Rules: 1
Applicable Optimizers:
* Zero-Byte
* Single-Hash
* Single-Salt
* Slow-Hash-SIMD
Watchdog: Temperature abort trigger disabled
Watchdog: Temperature retain trigger disabled
Initializing device kernels and memory...

ERROR: clCreateContext(): CL_UNKNOWN_ERROR

C:\Users\almei\Desktop\hashcat>



simply is this error at the end: ERROR: clCreateContext(): CL_UNKNOWN_ERROR
which could be, for I am with SDK installed on my PC and OpenCL installed too!
I follow all the minimum requirement parameters, however I am with this problem! can help me please 

details on Attachment files

[kiara]

HELLO! 

my operating system which I am trying to run the hashcat is Windowns 10 ANNIVERSARY UPDATE.

Apparently, I am with all the minimum requirements to run this program, however, when running (adiministrador), configure all the parameter settings as hash type WPA / WPA2, and wordlist. however when you click SEEK END DESTROY. I open a pront window with the following initial parameters:


hashcat (v3.10) starting...
OpenCL Platform #1: Intel(R) Corporation
========================================
- Device #1: Intel(R) Core(TM)2 Duo CPU E4500 @ 2.20GHz, 509/2039 MB allocatable, 2MCU
Hashes: 1 hashes; 1 unique digests, 1 unique salts
Bitmaps: 16 bits, 65536 entries, 0x0000ffff mask, 262144 bytes, 5/13 rotates
Rules: 1
Applicable Optimizers:
* Zero-Byte
* Single-Hash
* Single-Salt
* Slow-Hash-SIMD
Watchdog: Temperature abort trigger disabled
Watchdog: Temperature retain trigger disabled
Initializing device kernels and memory...

ERROR: clCreateContext(): CL_UNKNOWN_ERROR

C:\Users\almei\Desktop\hashcat>



simply is this error at the end: ERROR: clCreateContext(): CL_UNKNOWN_ERROR
which could be, for I am with SDK installed on my PC and OpenCL installed too!
I follow all the minimum requirement parameters, however I am with this problem! can help me please 

details on Attachment files

try to uninstall ur opencl and ur gpu driver then reinstall

[hackerentreprise]

HELLO! 
currently, my video card is onboard(video card 256mb), as uninstall driver and installed restarted ... and nothing ...


still the same error.

my motherboard is somewhat old, and my processor is a Core (TM) 2 Duo CPU E4500 @ 2.20GHz

hashcat (v3.10) starting...
OpenCL Platform #1: Intel(R) Corporation
========================================
- Device #1: Intel(R) Core(TM)2 Duo CPU E4500 @ 2.20GHz, 509/2039 MB allocatable, 2MCU
Hashes: 1 hashes; 1 unique digests, 1 unique salts
Bitmaps: 16 bits, 65536 entries, 0x0000ffff mask, 262144 bytes, 5/13 rotates
Rules: 1
Applicable Optimizers:
* Zero-Byte
* Single-Hash
* Single-Salt
* Slow-Hash-SIMD
Watchdog: Temperature abort trigger disabled
Watchdog: Temperature retain trigger disabled
Initializing device kernels and memory...

ERROR: clCreateContext(): CL_UNKNOWN_ERROR

C:\Users\almei\Desktop\hashcat>

[SyetemErrro]

HELLO! 
currently, my video card is onboard(video card 256mb), as uninstall driver and installed restarted ... and nothing ...


still the same error.

my motherboard is somewhat old, and my processor is a Core (TM) 2 Duo CPU E4500 @ 2.20GHz

hashcat (v3.10) starting...
OpenCL Platform #1: Intel(R) Corporation
========================================
- Device #1: Intel(R) Core(TM)2 Duo CPU E4500 @ 2.20GHz, 509/2039 MB allocatable, 2MCU
Hashes: 1 hashes; 1 unique digests, 1 unique salts
Bitmaps: 16 bits, 65536 entries, 0x0000ffff mask, 262144 bytes, 5/13 rotates
Rules: 1
Applicable Optimizers:
* Zero-Byte
* Single-Hash
* Single-Salt
* Slow-Hash-SIMD
Watchdog: Temperature abort trigger disabled
Watchdog: Temperature retain trigger disabled
Initializing device kernels and memory...

ERROR: clCreateContext(): CL_UNKNOWN_ERROR

C:\Users\almei\Desktop\hashcat>





some told me that if I use the bin (exe) 2.01, 64-bit this problem would end, so I ask:




where I find the download gui binary (exe) 2:01 FOR WINDOWS? when access the official site hascat only available 3.10 or 3.0 ... have any FTP address? or link?

thank you

[atom]

To get old Core2 running, you need to use an old version of Intels OpenCL runtime, but I can't remember which version it was. Newer versions are broken (not hashcats fault).