NEED HELP!!!!
#1
Hi i need help with hashcat.
When i test hashcat64.exe -m 2500 -b i got this
Benchmarking uses hand-optimized kernel code by default.
You can use it in your cracking session by setting the -O option.
Note: Using optimized kernel code limits the maximum supported password length.
To disable the optimized kernel code in benchmark mode, use the -w option.

OpenCL Platform #1: Advanced Micro Devices, Inc.
================================================
* Device #1: Tahiti, 2393/3072 MB allocatable, 32MCU
* Device #2: Tahiti, 2393/3072 MB allocatable, 32MCU
* Device #3: AMD FX(tm)-4100 Quad-Core Processor, skipped.

Benchmark relevant options:
===========================
* --optimized-kernel-enable

Hashmode: 2500 - WPA/WPA2

Speed.Dev.#1.....:   144.3 kH/s (56.10ms)
Speed.Dev.#2.....:   144.3 kH/s (56.10ms)
Speed.Dev.#*.....:   288.6 kH/s

Started: Fri Dec 29 21:31:55 2017
Stopped: Fri Dec 29 21:32:10 2017

but when i use hashcat like this
hashcat64.exe -m 2500 -w 3 -o test.txt G:\untitled-folder\test.hccapx -a 6 F:\wpa111\Rockyou.txt ?d
i'm getting this resultat

hashcat (v4.0.1) starting...

OpenCL Platform #1: Advanced Micro Devices, Inc.
================================================
* Device #1: Tahiti, 2393/3072 MB allocatable, 32MCU
* Device #2: Tahiti, 2393/3072 MB allocatable, 32MCU
* Device #3: AMD FX(tm)-4100 Quad-Core Processor, skipped.

Hashes: 17 digests; 9 unique digests, 1 unique salts
Bitmaps: 16 bits, 65536 entries, 0x0000ffff mask, 262144 bytes, 5/13 rotates
Rules: 1

Applicable optimizers:
* Zero-Byte
* Single-Salt
* Slow-Hash-SIMD-LOOP

Password length minimum: 8
Password length maximum: 63

Watchdog: Temperature abort trigger set to 90c
Watchdog: Temperature retain trigger set to 75c

Dictionary cache hit:
* Filename..: F:\wpa111\Rockyou.txt
* Passwords.: 26147658
* Bytes.....: 254078155
* Keyspace..: 26147658

[s]tatus [p]ause [r]esume [b]ypass [c]heckpoint [q]uit =>

Session..........: hashcat
Status...........: Running
Hash.Type........: WPA/WPA2
Hash.Target......: G:\untitled-folder\marta.hccapx
Time.Started.....: Fri Dec 29 21:29:43 2017 (2 secs)
Time.Estimated...: Fri Dec 29 21:31:16 2017 (1 min, 31 secs)
Guess.Base.......: File (F:\wpa111\Rockyou.txt)
Guess.Queue......: 1/1 (100.00%)
Speed.Dev.#1.....:   142.7 kH/s (56.10ms)
Speed.Dev.#2.....:   142.4 kH/s (56.10ms)
Speed.Dev.#*.....:   284.2 kH/s
Recovered........: 0/9 (0.00%) Digests, 0/1 (0.00%) Salts
Progress.........: 76090/26147658 (0.29%)
Rejected.........: 76090/76090 (100.00%)
Restore.Point....: 0/26147658 (0.00%)
Candidates.#1....: 0508330334 -> 0861045679
Candidates.#2....: 00000000 -> 0855163438
HWMon.Dev.#1.....: Temp: 70c Fan: 33% Util: 79% Core:1000MHz Mem:1500MHz Bus:16
HWMon.Dev.#2.....: Temp: 65c Fan: 33% Util: 82% Core:1000MHz Mem:1500MHz Bus:16

Cracking performance lower than expected?

* Update your OpenCL runtime / driver the right way:
  https://hashcat.net/faq/wrongdriver

* Create more work items to make use of your parallelization power:
  https://hashcat.net/faq/morework

[s]tatus [p]ause [r]esume [b]ypass [c]heckpoint [q]uit =>

Session..........: hashcat
Status...........: Running
Hash.Type........: WPA/WPA2
Hash.Target......: G:\untitled-folder\marta.hccapx
Time.Started.....: Fri Dec 29 21:29:43 2017 (15 secs)
Time.Estimated...: Fri Dec 29 21:32:30 2017 (2 mins, 32 secs)
Guess.Base.......: File (F:\wpa111\Rockyou.txt)
Guess.Queue......: 1/1 (100.00%)
Speed.Dev.#1.....:    75592 H/s (57.09ms)
Speed.Dev.#2.....:    76531 H/s (56.08ms)
Speed.Dev.#*.....:   152.4 kH/s
Recovered........: 0/9 (0.00%) Digests, 0/1 (0.00%) Salts
Progress.........: 2908990/26147658 (11.13%)
Rejected.........: 1336126/2908990 (45.93%)
Restore.Point....: 2099764/26147658 (8.03%)
Candidates.#1....: alisesid -> bibi2307
Candidates.#2....: alejita88 -> alisexyback96
HWMon.Dev.#1.....: Temp: 74c Fan: 67% Util: 90% Core:1000MHz Mem:1500MHz Bus:16
HWMon.Dev.#2.....: Temp: 70c Fan: 44% Util: 94% Core:1000MHz Mem:1500MHz Bus:16

[s]tatus [p]ause [r]esume [b]ypass [c]heckpoint [q]uit =>

Session..........: hashcat
Status...........: Quit
Hash.Type........: WPA/WPA2
Hash.Target......: G:\untitled-folder\marta.hccapx
Time.Started.....: Fri Dec 29 21:29:43 2017 (17 secs)
Time.Estimated...: Fri Dec 29 21:32:15 2017 (2 mins, 15 secs)
Guess.Base.......: File (F:\wpa111\Rockyou.txt)
Guess.Queue......: 1/1 (100.00%)
Speed.Dev.#1.....:    80791 H/s (57.08ms)
Speed.Dev.#2.....:    81479 H/s (56.08ms)
Speed.Dev.#*.....:   162.3 kH/s
Recovered........: 0/9 (0.00%) Digests, 0/1 (0.00%) Salts
Progress.........: 4182480/26147658 (16.00%)
Rejected.........: 1561040/4182480 (37.32%)
Restore.Point....: 3020870/26147658 (11.55%)
Candidates.#1....: belisama -> cutekial12
Candidates.#2....: bibi2005 -> belisano
HWMon.Dev.#1.....: Temp: 70c Fan: 33% Util: 89% Core:1000MHz Mem:1500MHz Bus:16
HWMon.Dev.#2.....: Temp: 66c Fan: 33% Util: 89% Core:1000MHz Mem:1500MHz Bus:16

Started: Fri Dec 29 21:29:35 2017
Stopped: Fri Dec 29 21:30:02 2017

I mean my speed i going down from Speed.Dev.#*.....:   288.6 kH/s to Speed.Dev.#*.....:   162.3 kH/s
My OS is windows 10 64bit my video is AMD radeon 7990
drivers version Crimson ReLive Edition 17.11.4 Optional
Thank you Smile
Reply
#2
Your hccapx has 9 handshakes in it. Use only 1 at a time by manually cleaning the cap and selecting the best handshake in Wireshark. And for future reference, if you make your title less skiddish, you'll probably get more attention.
Reply
#3
soxrok2212 Thank you Smile))))))))
Reply
#4
Also with the newest version of Hashcat (4.0.0+)for best performance use -w 4 now not 3.
Reply
#5
thank you slyexe Smile
Reply
#6
slyexe
today i test hashcat-4.0.1+78 with -w 4 and i get only 133.4kH/s and my PC start work very slow
then i test it with -w 3 and i get 214.1kH/s and my PC is work ok.
i don't know why i get this big difference.
Reply
#7
Might be throttling due to high temperatures and/or to reduce power consumption. 7990 is a shitty card.
Reply
#8
Did you set the fan speed up? 33% is very optimistic for a 7990. They should run >70% all the time to keep the temps down. Plus the upper card (device 1) has some temp issues, you can detect that at the higher GPU temps while the fans also spins much higher. Maybe you can put both cards further apart or ramp up the airflow in your case. Or you can put an old card in between to shield one GPU from another. As long as the downer one has enough room to breathe of course Wink

Or the CPU is at some kind of limit with I/O- and/or Interrupt-handling.
Reply
#9
(01-04-2018, 04:47 PM)Flomac Wrote: Did you set the fan speed up? 33% is very optimistic for a 7990. They should run >70% all the time to keep the temps down. Plus the upper card (device 1) has some temp issues, you can detect that at the higher GPU temps while the fans also spins much higher. Maybe you can put both cards further apart or ramp up the airflow in your case. Or you can put an old card in between to shield one GPU from another. As long as the downer one has enough room to breathe of course Wink

Or the CPU is at some kind of limit with I/O- and/or Interrupt-handling.

The 7990 is a dual GPU card... both chips on same PCB so the cooling is even worse in this case.
Reply