nVidia 1660 familly hashrates
#1
Gonna buy a GPU for hashcat, and as I dont hash large dicts, I was considering a 1070 used or a 1660 new.
Have anyone tried the 1660 already? wondering if the hashrates woul be better than a 1060 and closer to a 1070.

thanks
Reply
#2
Both 1660 are much stronger than the 1060. Depending on the hash mode the 1660Ti compares about equally to the normal 1070. The 1070 Ti though is again much stronger.
Reply
#3
Finally bought a 1660 Super, I think performance is close to the 1070.. and here are the benchmarks:
BTW how could I solve de warning and use the CPU too?

powermi@hasher:~$ hashcat -b -O -w 4

hashcat (v5.1.0-1181-gc34fcabb) starting in benchmark mode...

* Device #3: CUDA SDK Toolkit installation NOT detected.
CUDA SDK Toolkit installation required for proper device support and utilization
Falling back to OpenCL Runtime

OpenCL API (OpenCL 2.1 LINUX) - Platform #1 [Intel(R) Corporation]
==================================================================
* Device #1: AMD FX(tm)-6300 Six-Core Processor, skipped

OpenCL API (OpenCL 1.2 pocl 1.1 None+Asserts, LLVM 6.0.0, SPIR, SLEEF, DISTRO, POCL_DEBUG) - Platform #2 [The pocl project]
===========================================================================================================================
* Device #2: pthread-AMD FX(tm)-6300 Six-Core Processor, skipped

OpenCL API (OpenCL 1.2 CUDA 10.2.131) - Platform #3 [NVIDIA Corporation]
========================================================================
* Device #3: GeForce GTX 1660 SUPER, 1485/5942 MB allocatable, 22MCU

Benchmark relevant options:
===========================
* --optimized-kernel-enable
* --workload-profile=4

Hashmode: 0 - MD5

Speed.#3.........: 18199.8 MH/s (162.16ms) @ Accel:128 Loops:1024 Thr:1024 Vec:1

Hashmode: 100 - SHA1

Speed.#3.........: 6548.8 MH/s (450.77ms) @ Accel:128 Loops:1024 Thr:1024 Vec:1

Hashmode: 1400 - SHA2-256

Speed.#3.........: 2718.2 MH/s (271.48ms) @ Accel:32 Loops:1024 Thr:1024 Vec:1

Hashmode: 1700 - SHA2-512

Speed.#3.........: 888.2 MH/s (415.43ms) @ Accel:16 Loops:1024 Thr:1024 Vec:1

Hashmode: 2500 - WPA-EAPOL-PBKDF2 (Iterations: 4095)

Speed.#3.........: 307.2 kH/s (292.70ms) @ Accel:32 Loops:512 Thr:1024 Vec:1

Hashmode: 1000 - NTLM

Speed.#3.........: 32479.1 MH/s (90.83ms) @ Accel:128 Loops:1024 Thr:1024 Vec:1

Hashmode: 3000 - LM

Speed.#3.........: 17425.1 MH/s (84.60ms) @ Accel:1024 Loops:1024 Thr:64 Vec:1

Hashmode: 5500 - NetNTLMv1 / NetNTLMv1+ESS

Speed.#3.........: 18600.1 MH/s (158.66ms) @ Accel:128 Loops:1024 Thr:1024 Vec:1

Hashmode: 5600 - NetNTLMv2

Speed.#3.........: 1386.3 MH/s (266.15ms) @ Accel:32 Loops:512 Thr:1024 Vec:1

Hashmode: 1500 - descrypt, DES (Unix), Traditional DES

Speed.#3.........: 683.9 MH/s (269.69ms) @ Accel:8 Loops:1024 Thr:1024 Vec:1

Hashmode: 500 - md5crypt, MD5 (Unix), Cisco-IOS $1$ (MD5) (Iterations: 1000)

Speed.#3.........: 8771.0 kH/s (319.46ms) @ Accel:128 Loops:1000 Thr:1024 Vec:1

Hashmode: 3200 - bcrypt $2*$, Blowfish (Unix) (Iterations: 32)

Speed.#3.........: 12716 H/s (148.60ms) @ Accel:8 Loops:32 Thr:11 Vec:1

Hashmode: 1800 - sha512crypt $6$, SHA512 (Unix) (Iterations: 5000)

Speed.#3.........: 136.0 kH/s (263.04ms) @ Accel:16 Loops:512 Thr:1024 Vec:1

Hashmode: 7500 - Kerberos 5, etype 23, AS-REQ Pre-Auth

Speed.#3.........: 231.9 MH/s (397.82ms) @ Accel:512 Loops:128 Thr:64 Vec:1

Hashmode: 13100 - Kerberos 5, etype 23, TGS-REP

Speed.#3.........: 231.3 MH/s (398.81ms) @ Accel:512 Loops:128 Thr:64 Vec:1

Hashmode: 15300 - DPAPI masterkey file v1 (Iterations: 23999)

Speed.#3.........: 52522 H/s (292.54ms) @ Accel:16 Loops:1024 Thr:1024 Vec:1

Hashmode: 15900 - DPAPI masterkey file v2 (Iterations: 12899)

Speed.#3.........: 31630 H/s (451.28ms) @ Accel:16 Loops:512 Thr:1024 Vec:1

Hashmode: 7100 - macOS v10.8+ (PBKDF2-SHA512) (Iterations: 1023)

Speed.#3.........: 370.3 kH/s (473.09ms) @ Accel:128 Loops:63 Thr:1024 Vec:1

Hashmode: 11600 - 7-Zip (Iterations: 16384)

Speed.#3.........: 268.3 kH/s (334.68ms) @ Accel:128 Loops:512 Thr:1024 Vec:1

Hashmode: 12500 - RAR3-hp (Iterations: 262144)

Speed.#3.........: 35257 H/s (319.40ms) @ Accel:8 Loops:16384 Thr:1024 Vec:1

Hashmode: 13000 - RAR5 (Iterations: 32799)

Speed.#3.........: 31515 H/s (356.85ms) @ Accel:16 Loops:1024 Thr:1024 Vec:1

Hashmode: 6211 - TrueCrypt RIPEMD160 + XTS 512 bit (Iterations: 1999)

Speed.#3.........: 240.3 kH/s (347.99ms) @ Accel:16 Loops:512 Thr:1024 Vec:1

Hashmode: 13400 - KeePass 1 (AES/Twofish) and KeePass 2 (AES) (Iterations: 24569)

Speed.#3.........: 19921 H/s (753.79ms) @ Accel:16 Loops:1024 Thr:1024 Vec:1

Hashmode: 6800 - LastPass + LastPass sniffed (Iterations: 499)

Speed.#3.........: 2027.1 kH/s (278.06ms) @ Accel:128 Loops:124 Thr:1024 Vec:1

Hashmode: 11300 - Bitcoin/Litecoin wallet.dat (Iterations: 200459)

Speed.#3.........: 3924 H/s (466.68ms) @ Accel:128 Loops:128 Thr:1024 Vec:1
Reply
#4
To use your CPU simply enable it with -d 1 (or -d 1,3 for cpu+gpu)
Reply
#5
(02-11-2020, 06:38 PM)undeath Wrote: To use your CPU simply enable it with -d 1 (or -d 1,3 for cpu+gpu)

Thanks. and what abaut the CUDA SDK?
BTW I dont know why 2 CPUs are showed. Only have one.
Reply
#6
you need to use -D 1,2 (capital D for --opencl-device-types) to enable both CPU and GPU (-d x is something else, it just selects already whitelisted/enabled devices).

you have pocl installed and therefore the CPU is listed twice... you should uninstall pocl, because it's not working very well with OpenCL.

the CUDA SDK needs to be installed from nvidia.com (https://developer.nvidia.com/cuda-downloads). Only latest/beta version (at the time of this writing) support the CUDA backend. If you install CUDA correctly, also your GPUs will be listed twice (you can select between the "aliases", i.e. between OpenCL vs CUDA devices).
Reply
#7
Config: Ubuntu 20.4 / i7 7700k stock/ ASUS z270 Prime / Palit 1660 (non-Ti) 6Gb / 450.80.02 Driver / Cuda 11.0

Code:
$ hashcat -b
hashcat (v5.1.0) starting in benchmark mode...

Benchmarking uses hand-optimized kernel code by default.
You can use it in your cracking session by setting the -O option.
Note: Using optimized kernel code limits the maximum supported password length.
To disable the optimized kernel code in benchmark mode, use the -w option.

* Device #1: WARNING! Kernel exec timeout is not disabled.
            This may cause "CL_OUT_OF_RESOURCES" or related errors.
            To disable the timeout, see: https://hashcat.net/q/timeoutpatch
OpenCL Platform #1: NVIDIA Corporation
======================================
* Device #1: GeForce GTX 1660, 1484/5936 MB allocatable, 22MCU

Benchmark relevant options:
===========================
* --optimized-kernel-enable

Hashmode: 0 - MD5
Speed.#1.........: 17673.1 MH/s (83.03ms) @ Accel:512 Loops:512 Thr:256 Vec:1

Hashmode: 100 - SHA1
Speed.#1.........:  6212.3 MH/s (59.02ms) @ Accel:512 Loops:128 Thr:256 Vec:1

Hashmode: 1400 - SHA2-256
Speed.#1.........:  2398.4 MH/s (76.54ms) @ Accel:256 Loops:128 Thr:256 Vec:1

Hashmode: 1700 - SHA2-512
Speed.#1.........:  850.2 MH/s (54.14ms) @ Accel:128 Loops:64 Thr:256 Vec:1

Hashmode: 2500 - WPA-EAPOL-PBKDF2 (Iterations: 4096)
Speed.#1.........:  293.9 kH/s (76.21ms) @ Accel:256 Loops:64 Thr:256 Vec:1

Hashmode: 1000 - NTLM
Speed.#1.........: 31573.0 MH/s (92.96ms) @ Accel:512 Loops:1024 Thr:256 Vec:1

Hashmode: 3000 - LM
Speed.#1.........: 16188.1 MH/s (45.43ms) @ Accel:128 Loops:1024 Thr:256 Vec:1

Hashmode: 5500 - NetNTLMv1 / NetNTLMv1+ESS
Speed.#1.........: 17365.0 MH/s (84.45ms) @ Accel:512 Loops:512 Thr:256 Vec:1

Hashmode: 5600 - NetNTLMv2
Speed.#1.........:  1333.1 MH/s (68.97ms) @ Accel:256 Loops:64 Thr:256 Vec:1

Hashmode: 1500 - descrypt, DES (Unix), Traditional DES
Speed.#1.........:  599.2 MH/s (76.61ms) @ Accel:8 Loops:1024 Thr:256 Vec:1

Hashmode: 500 - md5crypt, MD5 (Unix), Cisco-IOS $1$ (MD5) (Iterations: 1000)
Speed.#1.........:  7684.7 kH/s (84.74ms) @ Accel:1024 Loops:1000 Thr:32 Vec:1

Hashmode: 3200 - bcrypt $2*$, Blowfish (Unix) (Iterations: 32)
Speed.#1.........:    8805 H/s (39.12ms) @ Accel:16 Loops:4 Thr:8 Vec:1

Hashmode: 1800 - sha512crypt $6$, SHA512 (Unix) (Iterations: 5000)
Speed.#1.........:  103.1 kH/s (86.65ms) @ Accel:512 Loops:128 Thr:32 Vec:1

Hashmode: 7500 - Kerberos 5 AS-REQ Pre-Auth etype 23
Speed.#1.........:  218.1 MH/s (52.80ms) @ Accel:128 Loops:64 Thr:64 Vec:1

Hashmode: 13100 - Kerberos 5 TGS-REP etype 23
Speed.#1.........:  216.1 MH/s (53.29ms) @ Accel:128 Loops:64 Thr:64 Vec:1

Hashmode: 15300 - DPAPI masterkey file v1 (Iterations: 23999)
Speed.#1.........:    46469 H/s (82.08ms) @ Accel:256 Loops:64 Thr:256 Vec:1

Hashmode: 15900 - DPAPI masterkey file v2 (Iterations: 7999)
Speed.#1.........:    45639 H/s (62.32ms) @ Accel:256 Loops:128 Thr:32 Vec:1

Hashmode: 7100 - macOS v10.8+ (PBKDF2-SHA512) (Iterations: 35000)
Speed.#1.........:    10603 H/s (61.82ms) @ Accel:128 Loops:32 Thr:256 Vec:1

Hashmode: 11600 - 7-Zip (Iterations: 524288)
Speed.#1.........:    7241 H/s (96.21ms) @ Accel:512 Loops:128 Thr:256 Vec:1

Hashmode: 12500 - RAR3-hp (Iterations: 262144)
Speed.#1.........:    22187 H/s (63.20ms) @ Accel:4 Loops:16384 Thr:256 Vec:1

Hashmode: 13000 - RAR5 (Iterations: 32767)
Speed.#1.........:    31819 H/s (87.78ms) @ Accel:256 Loops:64 Thr:256 Vec:1

Hashmode: 6211 - TrueCrypt PBKDF2-HMAC-RIPEMD160 + XTS 512 bit (Iterations: 2000)
Speed.#1.........:  242.7 kH/s (93.80ms) @ Accel:256 Loops:32 Thr:256 Vec:1

Hashmode: 13400 - KeePass 1 (AES/Twofish) and KeePass 2 (AES) (Iterations: 6000)
Speed.#1.........:    71565 H/s (107.29ms) @ Accel:512 Loops:128 Thr:32 Vec:1

Hashmode: 6800 - LastPass + LastPass sniffed (Iterations: 500)
Speed.#1.........:  1961.5 kH/s (76.10ms) @ Accel:256 Loops:62 Thr:256 Vec:1

Hashmode: 11300 - Bitcoin/Litecoin wallet.dat (Iterations: 199999)
Speed.#1.........:    3885 H/s (59.14ms) @ Accel:128 Loops:64 Thr:256 Vec:1

Started: Sat Nov 21 18:59:03 2020
Stopped: Sat Nov 21 19:03:07 2020


Seems to be 35-50% of a 3070 speed, which for the prices of 3070 is on par if not cheaper to use.
Even without the "tuned" or exact driver.
Cheers!!!
Reply