03-15-2013, 05:04 AM
This is our standard build:
Chenbro RM41300-FS81
LEPA G1600-MA
Gigabyte GA-990FXA-UD7
AMD FX-8150
CORSAIR CMZ16GX3M2A1866C9
Due to heat considerations I would only recommend using three GPUs max, leaving a one-slot gap in between each GPU so that they cool properly. With this setup your temps will stay < 70C under 100% load.
But this setup is capable of four GPUs if that's what you want to do.
Chenbro RM41300-FS81
LEPA G1600-MA
Gigabyte GA-990FXA-UD7
AMD FX-8150
CORSAIR CMZ16GX3M2A1866C9
Due to heat considerations I would only recommend using three GPUs max, leaving a one-slot gap in between each GPU so that they cool properly. With this setup your temps will stay < 70C under 100% load.
But this setup is capable of four GPUs if that's what you want to do.